TRACE32 Debugger for STR910FAM32, STR910FAW32, STR910FAZ32, ...

Debug Solution for STR910FAM32, STR910FAW32, STR910FAZ32, ...
(USB 3.0, Gigabit Ethernet)

LA-3505 PowerDebug PRO Ethernet

LA-7742 JTAG Debugger for ARM9

Debug & Off-Chip Trace Solution for STR910FAM32, STR910FAW32, STR910FAZ32, ...
(USB 3.0, Gigabit Ethernet, Parallel Trace)

LA-3505 PowerDebug PRO Ethernet

LA-3580 PowerTrace II Lite 512 MB

LA-7742 JTAG Debugger for ARM9

LA-7992 Preproc. for ARM-ETM/AUTOFOCUS II 600 Flex

Debug & Off-Chip Trace Solution for STR910FAM32, STR910FAW32, STR910FAZ32, ...
(USB 3.0, Gigabit Ethernet, Parallel Trace)

LA-3505 PowerDebug PRO Ethernet

LA-7694 PowerTrace II 4 GigaByte

LA-7742 JTAG Debugger for ARM9

LA-7992 Preproc. for ARM-ETM/AUTOFOCUS II 600 Flex

Software Only Debug Solution for STR910FAM32, STR910FAW32, STR910FAZ32, ...

LA-8890L 1 User Floating License ARM Front-End

TRACE32 Instruction Set Simulator for STR910FAM32, STR910FAW32, STR910FAZ32, ...

LA-2804L 1 User Float. Lic. TRACE32 ARM Simulator

Adaptation for ARM ETM Preprocessor Mictor

Adaptation

Adaptation for ARM Debug Connector

Adaptation for ARM ETM Preprocessor MIPI-60

TRACE32 Features

ARM9 JTAG Debugger

Easy high-level and assembler debugging
Interface to all compilers
RTOS awareness
Display of internal and external peripherals at a logical level
Flash programming
Powerful script language
Hardware breakpoints and trigger (if supported by on chip debug interface)
Multicore debugging
Multiprocessor debugging
Software compatible to all TRACE32 tools
High-Speed download up to 1100 KByte/sec
Active Debugger controlled by PowerPC

ARM/Cortex Trace (parallel)

Up to 4 GByte trace buffer
Target voltage 1.2 .. 3.3 V
5 ns time stamp
Program and data trace
Performance analysis
Function and task run-time measurement
Code coverage
Support for Embedded Trace Macrocell (ETM), Program Trace Macrocell (PTM)
Support for Embedded Trace Buffer (ETB), Trace Memory Controller (TMC), Trace Port Interface Unit (TPIU)
Support for multiple trace sources in a single stream (CoreSight trace)

TRACE32 Instruction Set Simulators

Integral part of TRACE32
Configurable as system under debug (PBI=SIM)
Allows post-mortem debugging
Software compatible to all TRACE32 tools
Easy high-level and assembler debugging
OS-aware debugging
Cache simulation (architecture dependent)
Program and data flow trace based on a bus trace protocol
Advanced trace analysis features
Powerful script language
Programming interface for peripheral simulation
Not available for processor architectures that support user-defined instructions

Compiler Interfaces

Supported Compilers for ARM

ADA

GNAT PRO (ADACORE)
ELF/DWARF

ARMCC (ARM)
AIF
ELF/DWARF
REALVIEW-MDK (ARM)
ELF/DWARF
GCCARM (GNU)
COFF/STABS
ELF/DWARF
GREENHILLS-C (GREENHILLS)
ELF/DWARF
ICCARM (IAR)
ELF/DWARF
ICCV7-ARM (IMAGECRAFT)
ELF/DWARF
CARM (KEIL)
ELF/DWARF
HIGH-C (SYNOPSYS)
ELF/DWARF
TI-C (TI)
COFF
GNU-C (WINDRIVER)
COFF
D-CC (WINDRIVER)
ELF

C++

ARM-SDT-2.50 (ARM)
ELF/DWARF
REALVIEW-MDK (ARM)
ELF/DWARF
GCCARM (GNU)
COFF/STABS
GNU (GNU)
EXE/STABS
GCCARM (GNU)
ELF/DWARF
GREENHILLS-C++ (GREENHILLS)
ELF/DWARF
MSVC (MICROSOFT)
EXE/CV5
HIGH-C++ (SYNOPSYS)
ELF/DWARF

C/C++

GNAT PRO (ADACORE)
ELF/DWARF
XCODE (APPLE)
Mach-O
GCC (HIGHTEC)
ELF/DWARF
VX-ARM (TASKING)
ELF/DWARF

Target OS Support

Target OS Support for ARM

AMX (KadakProducts Ltd.)
Android (-)
ASTERIOS (KRONO-SAFE)
AtomThreads (-)
ChorusOS (Oracle Corporation)
CMX-RTX (CMX Systems Inc.)
EB tresos AutoCore OS (Elektrobit Automotive GmbH)
EB tresos Safety OS (Elektrobit Automotive GmbH)
ECOS (eCosCentric Limited)
embOS (Segger)
Erika (Evidence)
FAMOS (Infineon Technologies AG)
FreeRTOS (freeRTOS)
HIPPEROS (HIPPEROS S.A.)
Linux (-)
Linux (MontaVista Software, LLC)
Linux (Timesys Corporation)
LiteOS (LiteOS Project)
mbed OS (ARM Ltd.)
MQX (NXP Semiconductors)
MQX (Synopsys, Inc)
NetBSD (-)
Nucleus (Mentor Graphics Corporation)
NuttX (NuttX Community)
OP-TEE (Linaro)
OS-9 (Radisys Inc.)
OS21 (STMicroelectronics)
OSE Basic (Enea OSE Systems)
OSE Delta (Enea OSE Systems)
OSE Epsilon (Enea OSE Systems)
OSEK (-)
PikeOS (Sysgo AG)
prKERNEL (eSOL Co., Ltd.)
ProOSEK (Elektrobit Automotive GmbH)
pSOS+ (Wind River Systems)
QNX (BlackBerry Limited)
QNX (QNX Software Systems)
QXK (Quantum Leaps)
rcX (Hilscher GmbH)
RealTime Craft ()
RTEMS (RTEMS)
RTX-ARM (ARM Germany GmbH)
RTXC 3.2 (Quadros Systems Inc.)
RTXC Quadros (Quadros Systems Inc.)
SafeRTOS (Wittenstein)
Sciopta (Sciopta)
SMX (Coressent Technology Inc.)
SMX (Micro Digital Inc.)
Symbian OS (Symbian)
Symbian OS (Symbian)
SYS/BIOS (Texas Instruments)
T-Kernel (eSOL Co., Ltd.)
ThreadX (Express Logic Inc.)
uC/OS-II (Micrium Inc.)
uC/OS-III (Micrium Inc.)
uC3/Compact (E-Force Corporation eForce Co., Ltd.)
uC3/Standard (E-Force Corporation eForce Co., Ltd.)
uCLinux (-)
uITRON (-)
VxWorks (Wind River Systems)
Windows CE (Microsoft Corporation)
Windows Embedded Compact 2013 (Microsoft Corporation)
Windows Embedded Compact 7 (Microsoft Corporation)
Windows Mobile (Microsoft Corporation)
Windows Phone 7 (Microsoft Corporation)
Windows Standard (Microsoft Corporation)
Zephyr (Zephyr Project)

Bootloader

Supported Bootloader for ARM

U-Boot (DENX Software Engineering)
UEFI Aptio V (American Megatrends Inc.)
UEFI TianoCore (Intel Corporation)

Software-only Debuggers

Software-only Debuggers for ARM

GDB
VIRTUALIZER and VDK (Synopsys, Inc)
COMET and METEOR (Synopsys, Inc)
FAST MODELS VIRTUAL TARGET (ARM Ltd.)
(UltraSoC Technologies Ltd)

Software Updates

The TRACE32 Software Updater updates your current TRACE32 installation to the latest release version of TRACE32. It can be used if your current TRACE32 installation is newer than August 2012.

Product Information

Cart - Get Quote

Delete	Order No.	Quantity	Description
	Get Quote	Refresh

Standard Products

LA-7742

JTAG Debugger for ARM9

Show Allowed License/Programmable/Converter Options

supports ARM9 (0.4 V - 5 V)

supports 5-pin standard JTAG, cJTAG and
Serial Wire Debug Port

includes software for Windows, Linux and MacOSX

requires Power Debug Module

cJTAG and SWD require
Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or PowerDebug PRO

LA-3500

PowerDebug Module USB 3.0

Universal debug controller with
USB 3.0 for Windows/Linux/MacOSX

applicable for all TRACE32 debug cables

requires TRACE32 software DVD 2013/02 or newer

LA-3505

PowerDebug PRO Ethernet

JTAG Debugger Extension for ARM9

Universal debug controller,
1 Gbit Ethernet and
USB 3.0 (Windows/Linux/MacOSX)

LA-7742X

supports ARM9

requires a valid software guarantee or a valid
software maintenance key

please add the serial number of the base debug
cable to your order

Show Programmable Options

LA-3580

PowerTrace II Lite 512 MB

Universal Trace Port Controller,
512 MegaByte Trace Memory
Streaming rate up to 50 MByte/s

requires PowerDebug II Ethernet or PowerDebug PRO

LA-7694

PowerTrace II 4 GigaByte

Preproc. for ARM-ETM/AUTOFOCUS II 600 Flex

Universal Trace Port Controller,
4 Giga Byte Trace Memory

includes logic analyzer with
17 digital channels, 1024 KSamples

requires PowerDebug II Ethernet or PowerDebug PRO

Host requirements:
USB 2.0 or 100/1000 MBit Ethernet interface,
1.0 GigaByte RAM

LA-7992

Show Allowed License/Programmable/Converter Options

Parallel preprocessor for ARM/Cortex
Embedded Trace Macrocell (ETM),
Program Trace Macrocell (PTM)

Connector cable and software,
Variable threshold level and termination voltage,
AUTOFOCUS self calibration technology,
Support all ETM modes, with 2 MICTOR connectors,

Voltage: 1.2 to 3.3V - else contact support
Traceport: 1-32bit
Bandwidth: 9.6 Gbps (300MHz clock speed, DDR)
Connector: 2x38 pin mictor connector

Requires PowerTrace II, PowerTrace PX
or PowerTrace/Ethernet Version 6 or higher

LA-8890L

1 User Floating License ARM Front-End

TRACE32 Front-End connecting to
- third-party virtual target/simulators
- third-party target server such as GDB
- TRACE32 Back-End

supports ARM, Cortex and XScale

floating license via RLM (Reprise License Manager)

Please add the RLM HostID of the license server
to your order (please see our FAQ)

Show Allowed License Options

LA-2804L

1 User Float. Lic. TRACE32 ARM Simulator

Floating license to use the TRACE32 Instruction Set
Simulator for automated tests via script language
PRACTICE or via the TRACE32 Remote API

supports ARM/Cortex

for Windows32, Windows64, Linux32, Linux64
and Solaris, other platforms on request

floating license via RLM (Reprise License Manager)

Please add the RLM HostID of the license server
to your order (please see our FAQ)

Product Options

LA-2720

Converter ARM-20 to MIPS-14

Converter to connect an ARM Debug Cable to a MIPS-14 connector
on the target

LA-3722

ARM Converter ARM-20 to Mictor-38

Converter ARM-20 to TI-14

Converter to connect the ARM Debug Cable to a Mictor
connector on the target providing both debug and
trace signals. This is needed if you want to connect
the Debug Cable without a Preprocessor and if there
is only a Mictor on the target. Suitable for MMDSP
and ARC as well.

LA-7748

Converter ARM-20 to TI-14 or TI-20-Compact

Converter to connect a Debug Cable to a TI-14
connector which is used on many targets with
processors from Texas Instruments

LA-3780

Converter ARM-20 to MIPI-10/20/34 Arm/RISC-V

Converter to connect a Debug Cable to a TI-14 or
TI-20-Compact connector which is used on many
targets with processors from Texas Instruments.

LA-3770

ARM Converter ARM-20 to/from ARM-14

Converter to connect a 20-pin debug cable to 10/20/34 pin
connectors specified by MIPI

LA-7747

Converter to connect an ARM Debug Cable V1 (ARM-14)
to ARM-20 or to connect a newer ARM Debug Cable
(ARM-20) to ARM-14 target connector

ARM-14 is an obsolete connector specification,
do not use for new designs

LA-3726

ARM Converter 2x ARM-20 to ARM-20

Converter ARM-20 to ALTERA-10/RISCV-10

Converter to connect two ARM Debug Cable to one
connector on the target.

Old method to handle multicore debugging by using
two debugger hardware modules.

LA-3863

Converter from ARM 20-pin connector to
Altera 10-pin (Byteblaster) connector or
RISC-V 10-pin

Target connector pitch can be
2.54mm or 1.27mm (half size).

LA-3501

Galvanic Isolation for Debug Cable

Galvanic isolation
for ARM debug cable
for automotive debug cable

Components rated to IEC60950-1 (600 V working voltage)

requires
Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or PowerDebug PRO

LA-3788

Daisy Chainer 4 JTAG 20

Merges up to 4 JTAG interfaces to a daisy-chain

requires that all JTAG interfaces use the same VTREF

includes 4 JTAG Cable 20 Pin (LA-1968)

LA-2101

Adapter Half-Size 20 pin

Conv. Prepro.AF II Mictor, ARM20 to MIPI60

Adapter 20 pin 100 mil to 50 mil with cable.
Purpose: Use 20-pin Debug Cable with smaller target
connector. In case of ARM Debug Cable better use
MIPI-10 or MIPI-20 for new designs.

LA-3818

Converter Mictor-38/ARM20 to MIPI-20

Converter to connect Preprocessor AUTOFOCUS II Mictor38
to MIPI60 (QSH) connector

ARM/Cortex: Converter to connect Mictor38 TRACE A
and TRACE B (32-bit ETMv3) and an ARM Debug Cable
to a MIPI60 connector on the target

x86/x64: Converter to connect Mictor38 TRACE A to
to a MIPI60 connector on the target

LA-3809

Converter 2x Mictor-38 to MIPI-60

Converter to connect an ARM Preprocessor with
MICTOR-38 and a ARM debug cable with JTAG20 to a
20 pin connector specified by MIPI and CoreSight

It allows to use the Preprocessor on the 4 bit wide
trace port of the MIPI-20 connector

It can be re-configured for MIPI-34

Show Converter Options

LA-3816

Converter to connect an ARM Preprocessor to a
MIPI-60 on the target. Suitable for up to 16-bit
ETMv3. The converter is prepared to support various
other configurations because all clock and data
signals of the MIPI-60 are connected to the
Preprocessor.

LA-1370

Mictor Flex Extension

110 mm flex extension for Mictor 38pin connector

LA-3768

ETMv1 Conv. Mictor-38, 2x MIPI-34 to MIPI-60

ARM Converter to connect an ARM Preprocessor with
one Mictor-38 for 16-bit ETMv1 and two CombiProbes
for two 4-bit system trace ports to a MIPI-60
connector on the target.

LA-3769

Conv. Mictor-38, 2x MIPI-34 to MIPI-60

Converter to connect Preprocessor AUTOFOCUS II Mictor38
and 2 MIPI34 CombiProbes to MIPI60 (QSH) connector

ARM/Cortex: Converter to connect Mictor38 TRACE A (16-bit ETMv3)
and two MIPI34 CombiProbes to MIPI60 (QSH) connector on the
target

x86/x64: Converter to connect Mictor38 TRACE A and a MIPI34
CombiProbes to MIPI60 (QSH) connector on the target

LA-3813

OMAP3 Conv. Mictor-38, MIPI-34 to Mictor-38

Converter to connect an ARM Preprocessor and a
CombiProbe to a Mictor connector on the target.
This converter is designed for the OMAP3503 board
from Spectrum Digital. The upper ETM signals on
the Mictor can alternatively be used for system
trace (SDTI).

LA-3810

U8500 Conv. 2x Mictor38, 3x MIPI34 to MIPI60

Converter to connect an ARM Preprocessor (up to
24-bit PTM/ETMv3) and up to three CombiProbes
(3x STM/STP) to a MIPI-60 connector on the target.
This converter is designed for U8500/U5500
from ST Ericsson.

LA-3812

OMAP4 Conv. 2xMictor, ARM20, MIPI34 to MIPI60

Converter to connect an ARM Preprocessor (up to
18-bit PTM) and one CombiProbe (STM; two connection
options) or a Debug Cable to a MIPI-60 connector on
the target. This converter is designed for
OMAP4xxx based boards from Texas Instruments.

LA-3814

ETMv3 Conv. Mictor-38, MIPI-34 to MIPI-60