TRACE32 Debugger for SPC574K70, SPC574K72, SPC574K74, ...
TRACE32 Debugger for SPC574K70, SPC574K72, SPC574K74, ... |
|
|
|
| Note: | This page relates to Chip | State | Company | Alternative Configurations |
| SPC574K70 (K2) | STMicroelectronics |
| ||
| SPC574K72 (K2) | STMicroelectronics |
| ||
| SPC574K74 (K2) | STMicroelectronics |
| ||
| SPC57EM80 (McKinley) | STMicroelectronics |
| ||
| SPC57HM90 (Matterhorn) | STMicroelectronics |
| ||
| SPC584G80 (Chorus6M) | STMicroelectronics |
| ||
| SPC584G84 (Chorus6M) | STMicroelectronics |
| ||
| SPC584N80 (Bernina) | STMicroelectronics |
| ||
| SPC58EE80 (Eiger) | STMicroelectronics |
| ||
| SPC58EE84 (Eiger) | STMicroelectronics |
| ||
| SPC58EG80 (Chorus6M) | STMicroelectronics |
| ||
| SPC58EG84 (Chorus6M) | STMicroelectronics |
| ||
| SPC58EN80 (Bernina) | STMicroelectronics |
| ||
| SPC58EN84 (Bernina) | STMicroelectronics |
| ||
| SPC58NE80 (Eiger) | STMicroelectronics |
| ||
| SPC58NE84 (Eiger) | STMicroelectronics |
| ||
| SPC58NG80 (Chorus6M) | STMicroelectronics |
| ||
| SPC58NG84 (Chorus6M) | STMicroelectronics |
| ||
| SPC58NN84 (Bernina) | STMicroelectronics |
| ||
Aurora NEXUS Debugger&Trace | | ||
 |
|
||
|
|
||
 |
|
||
|
|
Additional InformationAurora NEXUS operation requires Emulation Device
TRACE32 Features
|
|
||
|
|
||
|
|
||
| |
Compiler Interfaces
|
|
||
| |
Target OS SupportSoftware Updates| OS | Description | File | Date | Size |
| Windows64 | Update for PowerPC |  trace32_powerpc...0.zip | 21-12-2018 | 133.47MB |
| Windows64 | Update for MPC55XX/56XX/57xx/SPC5XXX | trace32_powerpc5xxx...0.zip | 22-12-2018 | 135.81MB |
| OS | Description | File | Date | Size |
| Linux64 | Update for PowerPC | trace32_powerpc...0.tar.gz | 22-12-2018 | 127.19MB |
| Linux64 | Update for MPC55XX/56XX/57xx/SPC5XXX | trace32_powerpc5xxx...0.tar.gz | 22-12-2018 | 146.41MB |
Peripheral Definitions and MenusManualsStartup And Demo ScriptsProduct Information| Cart - Get Quote | ||||
| Delete | Order No. | Quantity | Description | |
| Get Quote | Refresh | |||
| Standard Products | ||||
   Universal debug controller, 1 Gbit Ethernet and USB 3.0 (Windows/Linux/MacOSX) | ||||
 supports Qorivva MPC5xxx/SPC5xxx (e200 cores) and Freescale PX SERIES processors eTPU, GTM and SPT debugging included Concurrent debugging of multiple e200 cores on multicore processors requires a License for Multicore Debugging (LA-7960X) (not necessary for lockstep mode) includes software for Windows, Linux and MacOSX requires Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, Power Debug II or PowerDebug PRO includes LA-3873 (Conv. AUTO26 to JTAG14 OnCE) | ||||
License for Multicore Debugging
 Allows the concurrent debugging of 2 or more identical cores Please add the base serial number of your Debug Cable respectively the serial number of the CombiProbe/uTrace to your order No "License for Multicore Debugging" is needed if the Debug Cable or the CombiProbe already has 2 debug licenses | ||||
 Universal Trace Port Controller, 512 MegaByte Trace Memory Streaming rate up to 50 MByte/s requires PowerDebug II Ethernet or PowerDebug PRO | ||||
 Universal Trace Port Controller, 1 Giga Byte Trace Memory includes logic analyzer with 17 digital channels, 1024 KSamples requires PowerDebug II Ethernet or PowerDebug PRO Host requirements: USB 2.0 or 100/1000 MBit Ethernet interface, 1.0 GigaByte RAM | ||||
 Universal Trace Port Controller, 2 Giga Byte Trace Memory includes logic analyzer with 17 digital channels, 1024 KSamples requires PowerDebug II Ethernet or PowerDebug PRO Host requirements: USB 2.0 or 100/1000 MBit Ethernet interface, 1.0 GigaByte RAM | ||||
 Universal Trace Port Controller, 4 Giga Byte Trace Memory includes logic analyzer with 17 digital channels, 1024 KSamples requires PowerDebug II Ethernet or PowerDebug PRO Host requirements: USB 2.0 or 100/1000 MBit Ethernet interface, 1.0 GigaByte RAM | ||||
 Aurora NEXUS Preprocessor for Qorivva MPC57xx/SPC57XX (high-speed serial trace port) - supports reference clock output up to 3125MHz POWER TRACE II: full support Supported speeds per lane: 4 lanes @ 4.25Gbps 3 lanes @ 6.0Gbps 2 lanes @ 6.25Gbps 1 lane @ 6.25Gbps POWER TRACE ETHERNET or POWER TRACE PX limited support Supported speeds per lane: 4 lanes @ 1.25 GBPS 2 lanes @ 2.5 GBPS - POWER TRACE ETHERNET module must have serial number E04xxxxxxxx or higher Required converter: - Samtec34 on target requires LA-3871: Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec34 including Samtec 34-pin flex extension cable - Samtec22 on target requires LA-3872: Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec22 including Samtec 22-pin flex extension cable | ||||
 Converter from JTAG14 of LA-7753 (JTAG Debugger Qorivva MPC5xxx/SPC5xxx) and from AUTO26 of LA-2708 (Debugger for MPC5xxx Automotive PRO) LA-3736 (JTAG Debugger for MPC5xxx Automotive) and Samtec 40 pin of LA-3911 (Preprocessor Aurora NEXUS Automotive) to Samtec ERF 34-pin Power.ORG pinout Includes Samtec 34-pin flex extension | ||||
| Product Options | ||||
 Converter from JTAG14 of LA-7753 (JTAG Debugger Qorivva MPC5xxx/SPC5xxx) and from AUTO26 of LA-2708 (Debugger for MPC5xxx Automotive PRO) LA-3736 (JTAG Debugger for MPC5xxx Automotive) and Samtec 40 pin of LA-3911 (Preprocessor Aurora NEXUS Automotive) to Samtec ERF 22-pin Power.ORG pinout Includes Samtec 22-pin flex extension for LA-3911 Preproc. Aurora NEXUS and if no separate JTAG/AUTO connector is available on the target, for LA-7753 (JTAG Debugger Qorivva MPC5xxx/SPC5xxx) | ||||
|
Copyright © 2019 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany
Impressum
Privacy Policy
The information presented is intended to give overview information only. Changes and technical enhancements or modifications can be made without notice. Report Errors Last generated/modified: 20-Mar-2019 |
JTAG Debugger with On-chip Trace
Aurora NEXUS Debugger&Trace
Get Quote
ADA
TRACE32 Help System
Show Allowed License Options
Hide Allowed License Options