TRACE32 Debugger for MKE14F256VLH16, MKE14F256VLL16, ...

TRACE32 Modular Tool Chain

Debug Solution for MKE14F256VLH16, MKE14F256VLL16, ...
(USB 3.0)

LA-3500 PowerDebug Module USB 3.0
LA-7844 Debugger for Cortex-M (ARMv6/7/8 32-bit)

Debug Solution for MKE14F256VLH16, MKE14F256VLL16, ...
(USB 3.0, Gigabit Ethernet)

LA-3505 PowerDebug PRO Ethernet
LA-7844 Debugger for Cortex-M (ARMv6/7/8 32-bit)

Debug & Off-Chip Trace Solution for MKE14F256VLH16, MKE14F256VLL16, ...
(USB 3.0, Gigabit Ethernet, Trace)

LA-3505 PowerDebug PRO Ethernet
LA-3580 PowerTrace II Lite 512 MB
LA-7844 Debugger for Cortex-M (ARMv6/7/8 32-bit)
LA-4597 Package for CombiProbe 2 ARM

Debug & Off-Chip Trace Solution for MKE14F256VLH16, MKE14F256VLL16, ...
(USB 3.0, Gigabit Ethernet, High-End Trace)

LA-3505 PowerDebug PRO Ethernet
LA-7694 PowerTrace II 4 GigaByte
LA-7844 Debugger for Cortex-M (ARMv6/7/8 32-bit)
LA-4597 Package for CombiProbe 2 ARM

Cortex-M (ARMv6/7/8 32-bit) Debugger

Adaptation

Adaptation for ARM Debug Connector

TRACE32 Features

Easy high-level and assembler debugging
Interface to all compilers
RTOS awareness
Display of internal and external peripherals at a logical level
Flash programming
Powerful script language
Support for CoreSight components like Debug Access Port, Trace Funnel, Trace Port Interface Unit, Embedded Trace Buffer, Cross Trigger Interface, Cross Trigger Matrix, System Trace Port, Trace Memory Controller
Real-time access to system memory and peripheral registers through Debug Access Port without halting the core
Multicore debugging
Multiprocessor debugging
High-Speed download

µTrace® for Cortex-M®

All-in-one debug and trace solution for Cortex-M
Recommended for single-core microcontrollers with Cortex-M
Recommended for multi-core microcontrollers with solely Cortex-M (single debug port)
256MByte trace memory
USB 3 interface to the host computer
TRACE32 Streaming up to 150 MByte/s

TRACE32 Software-only Debugger

TRACE32 Instruction Set Simulators

Integral part of TRACE32
Configurable as system under debug (PBI=SIM)
Allows post-mortem debugging
Software compatible to all TRACE32 tools
Easy high-level and assembler debugging
OS-aware debugging
Cache simulation (architecture dependent)
Program and data flow trace based on a bus trace protocol
Advanced trace analysis features
Powerful script language
Programming interface for peripheral simulation
Not available for processor architectures that support user-defined instructions

Compiler Interfaces

Supported Compilers for ARM

ADA

GNAT PRO (ADACORE)
ELF/DWARF

ARMCC (ARM)
AIF
ELF/DWARF
REALVIEW-MDK (ARM)
ELF/DWARF
GCCARM (GNU)
COFF/STABS
ELF/DWARF
GREENHILLS-C (GREENHILLS)
ELF/DWARF
ICCARM (IAR)
ELF/DWARF
ICCV7-ARM (IMAGECRAFT)
ELF/DWARF
CARM (KEIL)
ELF/DWARF
HIGH-C (SYNOPSYS)
ELF/DWARF
TI-C (TI)
COFF
GNU-C (WINDRIVER)
COFF
D-CC (WINDRIVER)
ELF

C++

ARM-SDT-2.50 (ARM)
ELF/DWARF
REALVIEW-MDK (ARM)
ELF/DWARF
GCCARM (GNU)
COFF/STABS
GNU (GNU)
EXE/STABS
GCCARM (GNU)
ELF/DWARF
GREENHILLS-C++ (GREENHILLS)
ELF/DWARF
MSVC (MICROSOFT)
EXE/CV5
HIGH-C++ (SYNOPSYS)
ELF/DWARF

C/C++

GNAT PRO (ADACORE)
ELF/DWARF
XCODE (APPLE)
Mach-O
GCC (HIGHTEC)
ELF/DWARF
VX-ARM (TASKING)
ELF/DWARF

Target OS Support

Target OS Support for CORTEX-M

ChibiOS (ChibiOS EmbeddedWare)
CMX-RTX (CMX Systems Inc.)
ECOS (eCosCentric Limited)
ECOS (eCosCentric Limited)
embOS (Segger)
FreeRTOS (freeRTOS)
MQX (NXP Semiconductors)
Nucleus PLUS (Mentor Graphics Corporation)
OSEK (-)
RTEMS (RTEMS)
RTX-ARM (ARM Germany GmbH)
RTXC Quadros (Quadros Systems Inc.)
Sciopta (Sciopta)
SMX (Coressent Technology Inc.)
SMX (Micro Digital Inc.)
SYS/BIOS (Texas Instruments)
ThreadX (Express Logic Inc.)
uC/OS-II (Micrium Inc.)
uC/OS-III (Micrium Inc.)
uCLinux (-)
uITRON (-)

Software-only Debuggers

Software-only Debuggers for ARM

GDB
VIRTUALIZER and VDK (Synopsys, Inc)
COMET and METEOR (Synopsys, Inc)
FAST MODELS VIRTUAL TARGET (ARM Ltd.)
(UltraSoC Technologies Ltd)

Software Updates

The TRACE32 Software Updater updates your current TRACE32 installation to the latest release version of TRACE32. It can be used if your current TRACE32 installation is newer than August 2012.

Manuals

TRACE32 Help System

Startup And Demo Scripts

Start-Up and other Scripts

Product Information

Cart - Get Quote

Delete	Order No.	Quantity	Description
	Get Quote	Refresh

Standard Products

LA-3500

PowerDebug Module USB 3.0

Universal debug controller with
USB 3.0 for Windows/Linux/MacOSX

applicable for all TRACE32 debug cables

requires TRACE32 software DVD 2013/02 or newer

LA-3505

PowerDebug PRO Ethernet

Debugger for Cortex-M (ARMv6/7/8 32-bit)

Universal debug controller,
1 Gbit Ethernet and
USB 3.0 (Windows/Linux/MacOSX)

LA-7844

Show Allowed License/Converter Options

Supports Arm Cortex-M cores

trace support ETM Cortex-M via ETB included

20 pin Arm connector

supports 5-pin standard JTAG, cJTAG and
Serial Wire Debug Port, (0.4 V - 5 V)

includes software for Windows, Linux and MacOSX

requires Power Debug Module

cJTAG and SWD require
Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or PowerDebug PRO

LA-3580

PowerTrace II Lite 512 MB

Universal Trace Port Controller,
512 MegaByte Trace Memory
Streaming rate up to 50 MByte/s

requires PowerDebug II Ethernet or PowerDebug PRO

LA-7692

PowerTrace II 1 GigaByte

Universal Trace Port Controller,
1 Giga Byte Trace Memory

includes logic analyzer with
17 digital channels, 1024 KSamples

requires PowerDebug II Ethernet or PowerDebug PRO

Host requirements:
USB 2.0 or 100/1000 MBit Ethernet interface,
1.0 GigaByte RAM

LA-7693

PowerTrace II 2 GigaByte

Universal Trace Port Controller,
2 Giga Byte Trace Memory

includes logic analyzer with
17 digital channels, 1024 KSamples

requires PowerDebug II Ethernet or PowerDebug PRO

Host requirements:
USB 2.0 or 100/1000 MBit Ethernet interface,
1.0 GigaByte RAM

LA-7694

PowerTrace II 4 GigaByte

Universal Trace Port Controller,
4 Giga Byte Trace Memory

includes logic analyzer with
17 digital channels, 1024 KSamples

requires PowerDebug II Ethernet or PowerDebug PRO

Host requirements:
USB 2.0 or 100/1000 MBit Ethernet interface,
1.0 GigaByte RAM

LA-4597

Package for CombiProbe 2 ARM

Debug cable and 512 MByte of trace memory

Supports Standard-JTAG, cJTAG and
Serial Wire Debug Port

Bandwidth of 400 MBit/s per trace channel

requires at least one of the following A-licenses:
LA-7742A (JTAG Debugger License for ARM9 Add.)
LA-7746A (JTAG Debugger License for ARM7 Add.)
LA-7765A (JTAG Debugger License for ARM11 Add.)
LA-7843A (JTAG Debugger License for CORTEX-A Add.)
LA-7844A (JTAG Debugger License for CORTEX-M Add.)

Trace support (up to 4-bit) included:
- MIPI System Trace
- ITM via Serial Wire Output/TPIU
- ETM Cortex-M continuous mode via TPIU

Supports the following trace licenses:
LA-7970X (Trace License for the ARM Architecture)

requires Power Debug Interface USB 3.0,
Power Debug II or Power Debug PRO

5V tolerant inputs; max. output level 3.3V

Consists of
LA-4572 CombiProbe 2 Hardware
LA-4513 Whisker MIPI20T-HS CombiProbe/uTrace
LA-2109 Half-Size-Cable 20-20 short
LA-2108 Half-Size-Cable 20-10 short
LA-2730 ARM Converter MIPI-20T to ARM-20
LA-4505 Whisker Cable MIPI34 for CombiProbe
LA-1937 MIPI-Half-Size-Cable 34-10
LA-1938 MIPI-Half-Size-Cable 34-20
LA-1939 MIPI-Half-Size-Cable 34
LA-3771 ARM Converter MIPI-34 to ARM-20 or TI-14

Product Options

LA-2720

Converter ARM-20 to MIPS-14

Converter to connect an ARM Debug Cable to a MIPS-14 connector
on the target

LA-3722

ARM Converter ARM-20 to Mictor-38

Converter ARM-20 to TI-14

Converter to connect the ARM Debug Cable to a Mictor
connector on the target providing both debug and
trace signals. This is needed if you want to connect
the Debug Cable without a Preprocessor and if there
is only a Mictor on the target. Suitable for MMDSP
and ARC as well.

LA-7748

Converter ARM-20 to TI-14 or TI-20-Compact

Converter to connect a Debug Cable to a TI-14
connector which is used on many targets with
processors from Texas Instruments

LA-3780

Converter ARM-20 to MIPI-10/20/34 Arm/RISC-V

Converter to connect a Debug Cable to a TI-14 or
TI-20-Compact connector which is used on many
targets with processors from Texas Instruments.

LA-3770

ARM Converter ARM-20 to/from ARM-14

Converter to connect a 20-pin debug cable to 10/20/34 pin
connectors specified by MIPI

LA-7747

Converter to connect an ARM Debug Cable V1 (ARM-14)
to ARM-20 or to connect a newer ARM Debug Cable
(ARM-20) to ARM-14 target connector

ARM-14 is an obsolete connector specification,
do not use for new designs

LA-3726

ARM Converter 2x ARM-20 to ARM-20

Converter to connect two ARM Debug Cable to one
connector on the target.

Old method to handle multicore debugging by using
two debugger hardware modules.

LA-3501

Galvanic Isolation for Debug Cable

Galvanic isolation
for ARM debug cable
for automotive debug cable

Components rated to IEC60950-1 (600 V working voltage)

requires
Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or PowerDebug PRO

LA-3788

Daisy Chainer 4 JTAG 20

Merges up to 4 JTAG interfaces to a daisy-chain

requires that all JTAG interfaces use the same VTREF

includes 4 JTAG Cable 20 Pin (LA-1968)

LA-2101

Adapter Half-Size 20 pin