TRACE32 Debugger for ARC-HS34, ARC-HS36, ARC-HS38, ARC-HS44, ...

Universal debug controller with
USB 3.0 for Windows/Linux/MacOSX

applicable for all TRACE32 debug cables

requires TRACE32 software DVD 2013/02 or newer

Universal debug controller,
1 Gbit Ethernet and
USB 3.0 (Windows/Linux/MacOSX)

supports ARC 700, ARC 600, ARC EM, ARC HS,
ARCtangent-A5 and ARCtangent-A4

includes software for Windows, Linux and MacOSX

requires Power Debug Module

debug cable with 20 pin connector

Universal Trace Port Controller,
512 MegaByte Trace Memory
Streaming rate up to 50 MByte/s

requires PowerDebug II Ethernet or PowerDebug PRO

Universal Trace Port Controller,
4 Giga Byte Trace Memory

includes logic analyzer with
17 digital channels, 1024 KSamples

requires PowerDebug II Ethernet or PowerDebug PRO

Host requirements:
USB 2.0 or 100/1000 MBit Ethernet interface,
1.0 GigaByte RAM

Preprocessor for ARC Real-Time Trace (ARC RTT)

Connector cable and software,
600 MHz clock speed,
8,16,32 Bit Trace Port width,
Variable threshold level and termination voltage,
AUTOFOCUS self calibration technology,
Supports 1.2 to 3.3V - else contact support

Requires PowerTrace/Ethernet Version 6 or higher
or PowerTrace II

TRACE32 Front-End connecting to
virtual prototypes/simulators
(Synopsys Virtualizer, nSIM ...) via MCD API or ARCINT API

supports ARC

floating license via RLM (Reprise License Manager)

Please add the RLM HostID of the license server
to your order (please see our FAQ)

Converter to connect an ARM Debug Cable to a MIPS-14 connector
on the target

Converter to connect the ARM Debug Cable to a Mictor
connector on the target providing both debug and
trace signals. This is needed if you want to connect
the Debug Cable without a Preprocessor and if there
is only a Mictor on the target. Suitable for MMDSP
and ARC as well.

Converter to connect a 20-pin debug cable to 10/20/34 pin
connectors specified by MIPI

Converter to connect a ARM Debug Cable
to a 16 pin PowerPC connector (PPC4xx)

Adapter 20 pin 100 mil to 50 mil with cable.
Purpose: Use 20-pin Debug Cable with smaller target
connector. In case of ARM Debug Cable better use
MIPI-10 or MIPI-20 for new designs.