TRACE32 Debugger for ARC-A4, ARC-A5

Universal debug controller with
USB 3.0 for Windows/Linux/MacOSX

applicable for all TRACE32 debug cables

requires TRACE32 software DVD 2013/02 or newer

Universal debug controller,
1 Gbit Ethernet and
USB 3.0 (Windows/Linux/MacOSX)

supports ARC 700, ARC 600, ARC EM, ARC HS,
ARCtangent-A5 and ARCtangent-A4

includes software for Windows, Linux and MacOSX

requires Power Debug Module

debug cable with 20 pin connector

Converter to connect an ARM Debug Cable to a MIPS-14 connector
on the target

Converter to connect the ARM Debug Cable to a Mictor
connector on the target providing both debug and
trace signals. This is needed if you want to connect
the Debug Cable without a Preprocessor and if there
is only a Mictor on the target. Suitable for MMDSP
and ARC as well.

Converter to connect a 20-pin debug cable to 10/20/34 pin
connectors specified by MIPI

Converter to connect a ARM Debug Cable
to a 16 pin PowerPC connector (PPC4xx)

Adapter 20 pin 100 mil to 50 mil with cable.
Purpose: Use 20-pin Debug Cable with smaller target
connector. In case of ARM Debug Cable better use
MIPI-10 or MIPI-20 for new designs.