TRACE32 Debugger for 88F3720-Z1

Supports Armv8 and Armv9 based Cortex-A,
Cortex-R, Cortex-X and Neoverse 32/64-bit cores

GTM, SPT, IPU and Multicore debugging included

IDC20A debug cable supports 5-pin standard JTAG, cJTAG and
Serial Wire Debug Port, (0.4V - 5V)

includes software for Windows, Linux and MacOSX

cJTAG and SWD require
Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
PowerDebug PRO, PowerDebug E40 or PowerDebug X50

Serial Trace Port Controller with 4 Giga Byte Trace Memory
for Arm-ETM

requires PowerDebug II Ethernet, PowerDebug PRO or PowerDebug X50

requires accessories as LA-3521 or LA-3522

Host requirements:
USB 3.0 or 1000 MBit Ethernet interface,
4.0 GigaByte RAM

voltage range 0.15V to 1.25V

eXtended connectivity line universal debug controller
with 1 Gbit Ethernet and
USB 3.0 for Windows/Linux/MacOSX

can be used for TRACE32 Debug Cable and
for the TRACE32 CombiProbe

requires TRACE32 software DVD 2022/09 SP2 or newer

up to 4 lanes with up to 22.5Gbit/s each

requires PowerTrace Serial and
TRACE32 software DVD 2022/09 or newer

Supports Arm Cortex-M cores and
SecurCore SC000/SC300
trace support ETM Cortex-M via ETB included
GTM, IPU and Multicore debugging included

requires a valid software guarantee or a valid
software maintenance key

please add the base serial number of your debug
cable to your order

Converter to connect an IDC20A Debug Cable
to a MIPS-14 connector on the target

Former name: Converter ARM-20 to MIPS-14

Converter to connect the IDC20A Debug Cable to a Mictor
connector on the target providing both debug and
trace signals. This is needed if you want to connect
the Debug Cable without a Preprocessor and if there
is only a Mictor on the target.

Former name: ARM Converter ARM-20 to Mictor-38

Converter to connect an IDC20A Debug Cable to a TI-14
connector which is used on many targets with
processors from Texas Instruments

Former name: Converter ARM-20 to TI-14

Converter to connect a Debug Cable to a TI-14 or
TI-20-Compact connector which is used on many
targets with processors from Texas Instruments

Former name: Converter ARM-20 to TI-14 or TI-20-Compact

Converter to connect a 20-pin debug cable to 10/20/34 pin
connectors specified by MIPI

Former name: Converter ARM-20 to MIPI-10/20/34 Arm/RISC-V

Converter to connect an Arm Debug Cable V1 (ARM-14)
to IDC20A or to connect a newer IDC20A Debug Cable
to ARM-14 target connector

ARM-14 is an obsolete connector specification,
do not use for new designs

Former name: ARM Converter ARM-20 to/from ARM-14

Adapter 20 pin 100 mil to 50 mil with cable