TRACE32 Debugger for 88F3710-A0

Supports Armv8 and Armv9 based Cortex-A,
Cortex-R, Cortex-X and Neoverse 32/64-bit cores

GTM, SPT, IPU and Multicore debugging included

IDC20A debug cable supports 5-pin standard JTAG, cJTAG and
Serial Wire Debug Port, (0.4V - 5V)

includes software for Windows, Linux and MacOSX

cJTAG and SWD require
Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
PowerDebug PRO, PowerDebug E40 or PowerDebug X50



Consists of
LA-3000 IDC20A Debug Cable V5 for JTAG/SWD
LA-3743A Debugger for Armv8/Armv9 Add.
LA-3403I GTM debugging included
LA-3405I SPT debugging included
LA-3410I IPU debugging included
LA-7960I Multicore debugging included
LA-8017I TRACE32-ICD Software Warranty First Year

Serial Trace Port Controller with 4 Giga Byte Trace Memory
for Arm-ETM

requires PowerDebug II Ethernet, PowerDebug PRO or PowerDebug X50

requires accessories as LA-3521 or LA-3522

Host requirements:
USB 3.0 or 1000 MBit Ethernet interface,
4.0 GigaByte RAM

voltage range 0.15V to 1.25V



Consists of
LA-3120 PowerTrace Serial 4GByte Hardware V1
LA-7970A Trace License for Arm (AF-II/PTS)
LA-3407I GTM tracing included

eXtended connectivity line universal debug controller
with 1 Gbit Ethernet and
USB 3.0 for Windows/Linux/MacOSX

can be used for TRACE32 Debug Cable and
for the TRACE32 CombiProbe

requires TRACE32 software DVD 2022/09 SP2 or newer


Includes
LA-1958- EU/US/IN/CN/UK Desktop Power Supply
LA-1943 USB-3 Cable
LA-7411 Trigger Connector for PowerTools

up to 4 lanes with up to 22.5Gbit/s each

requires PowerTrace Serial and
TRACE32 software DVD 2022/09 or newer


Includes
LA-1211 Flex Ext. for SAMTEC 80 pin ERM8-ERM8 500mm B
LA-3509 Retainer for Samtec 80 (PowerTrace Serial)
LA-1212 Flex Ext. for SAMTEC 40 pin ERM8-ERM8 200mm B
LA-3770 Converter IDC20A to MIPI-10/20/34
LA-1937 MIPI-Half-Size-Cable 34-10
LA-1938 MIPI-Half-Size-Cable 34-20
LA-1939 MIPI-Half-Size-Cable 34

Supports Arm Cortex-M cores and
SecurCore SC000/SC300
trace support ETM Cortex-M via ETB included
GTM, IPU and Multicore debugging included

requires a valid software guarantee or a valid
software maintenance key

please add the base serial number of your debug
cable to your order



Includes
LA-2902I Trace License for Cortex-M
LA-3403I GTM debugging included
LA-3407I GTM tracing included
LA-3410I IPU debugging included
LA-7960I Multicore debugging included

Converter to connect an IDC20A Debug Cable
to a MIPS-14 connector on the target

Former name: Converter ARM-20 to MIPS-14

Converter to connect the IDC20A Debug Cable to a Mictor
connector on the target providing both debug and
trace signals. This is needed if you want to connect
the Debug Cable without a Preprocessor and if there
is only a Mictor on the target.

Former name: ARM Converter ARM-20 to Mictor-38

Converter to connect an IDC20A Debug Cable to a TI-14
connector which is used on many targets with
processors from Texas Instruments

Former name: Converter ARM-20 to TI-14

Converter to connect a Debug Cable to a TI-14 or
TI-20-Compact connector which is used on many
targets with processors from Texas Instruments

Former name: Converter ARM-20 to TI-14 or TI-20-Compact

Converter to connect a 20-pin debug cable to 10/20/34 pin
connectors specified by MIPI

Former name: Converter ARM-20 to MIPI-10/20/34 Arm/RISC-V


Includes
LA-1937 MIPI-Half-Size-Cable 34-10
LA-1938 MIPI-Half-Size-Cable 34-20
LA-1939 MIPI-Half-Size-Cable 34

Converter to connect an Arm Debug Cable V1 (ARM-14)
to IDC20A or to connect a newer IDC20A Debug Cable
to ARM-14 target connector

ARM-14 is an obsolete connector specification,
do not use for new designs

Former name: ARM Converter ARM-20 to/from ARM-14

Adapter 20 pin 100 mil to 50 mil with cable


Includes
LA-2111 Half-Size-Cable 20