Chip: 88F3720-A0
Vendor:
MARVELL
Family:
Cortex-A_Armv8
Main Core:
Cortex-A53
RECOMMENDED CONFIGURATIONS
Find the Ideal Tool Configuration for 88F3720-A0
Throughout our recommended debug and trace solutions, you can easily find and select the most suitable tool configuration for your chip. Whether you need to perform simple hardware debugging or more advanced tasks such as off-chip tracing, the following TRACE32 configurations will provide you with a good starting point.
1/6: Debugger (2)
2/6: Debugger & Off-Chip Trace HSSTP up to 6.25 Gbit/s (2)
3/6: Debugger & Off-Chip Trace HSSTP up to 12.5 Gbit/s (1)
4/6: Debugger & Off-Chip Trace HSSTP up to 22.5 Gbit/s (1)
5/6: Debugging via XCP (1)
6/6: TRACE32 Instruction Set Simulator (1)
Essential Debugger with USB
Hardware
Lauterbach PowerDebug E40 with IDC20A debug probe
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3
Debug port
1 (IDC20A)
Debug clock
10 kHz to 100 MHz (depends on target)
Voltage range
0.4 V to 5.0 V
Multicore debugging
Yes, for same and other architectures via optional licenses
On-chip trace
via optional license
Off-chip trace
via optional CombiProbe extension (for 4 bit trace ports)
Universal Debugger ready for PowerTrace
Hardware
Lauterbach PowerDebug X50 with IDC20A debug probe
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3 and Gigabit Ethernet
Debug port
1 (IDC20A)
Debug clock
10 kHz to 100 MHz (depends on target)
Voltage range
0.4 V to 5.0 V
Multicore debugging
Yes, for same and other architectures via optional licenses
On-chip trace
via optional license
Off-chip trace
via optional PowerTrace or CombiProbe extension
Serial Trace with universal PowerTrace III
Debug Hardware
Lauterbach PowerDebug X50 with debug probe
Trace Hardware
PowerTrace III with serial trace probe
Software
Includes PowerView software, debug license and 1 year maintenance
Multicore support
Yes, for same and other architectures via optional licenses
PC connection
USB 3 and Gigabit Ethernet
Debug Port
1
Serial trace lanes
up to 4
Recording speed
6.25 Gbit/s per lane @ 3 lanes, 5.00 Gbit/s per lane @ 4 lanes
Streaming
400 Mbyte/s
Trace Memory
8 GByte
Signal probing
via optional Mixed-Signal Probe
Serial Trace with cost-effective PowerTrace II Lite
Debug Hardware
Lauterbach PowerDebug X50 with debug probe
Trace Hardware
PowerTrace II Lite with serial trace probe
Software
Includes PowerView software, debug license and 1 year maintenance
Multicore support
Yes, for same and other architectures via optional licenses
PC connection
USB 3 and Gigabit Ethernet
Debug Port
1
Serial trace lanes
up to 4
Recording speed
6.25 Gbit/s per lane @ 2 lanes, 3.38 Gbit/s per lane @ 4 lanes
Streaming
100 Mbyte/s
Trace Memory
1 GByte
Signal probing
not available
High-performance Serial Trace
Debug Hardware
Lauterbach PowerDebug X50 with debug probe
Trace Hardware
PowerTrace Serial 2
Software
Includes PowerView software, debug license and 1 year maintenance
Multicore support
Yes, for same and other architectures via optional licenses
PC connection
USB 3 and Gigabit Ethernet
Debug Port
1
Serial trace lanes
Up to 8 (Just 6 with shown flex cable)
Recording speed
12.5 Gbit/s per lane @ 8 lanes
Streaming
400 Mbyte/s
Trace Memory
8 GByte
Signal probing
via optional Mixed-Signal Probe
Serial Trace with Aurora 2 probe for highest speeds
Debug Hardware
Lauterbach PowerDebug X50 with debug probe
Trace Hardware
PowerTrace Serial 2 with Aurora 2 trace probe
Software
Includes PowerView software, debug license and 1 year maintenance
Multicore support
Yes, for same and other architectures via optional licenses
PC connection
USB 3 and Gigabit Ethernet
Debug Port
1
Serial trace lanes
up to 8
Recording speed
22.5 Gbit/s per lane @ 4 lanes, 12.5 Gbit/s per lane @ 8 lanes
Streaming
400 Mbyte/s
Trace Memory
8 GByte
Signal probing
via optional Mixed-Signal Probe
Debugging via Calibration Tools (XCP)
Supported API
Universal Measurement and Calibration Protocol (XCP)
Content
Includes PowerView software, front-end license, XCP backend-license, and 1 year maintenance
Licenses Options
Trace decoder license
Instruction Set Simulator
Simulator
Simulates the instruction set of an architecture family (including its subfamilies)
Extendable
Models of memory mapped peripheral can be connected
Automated testing
The included license allows automated tests with the simulator.
Content
Includes PowerView software, simulator license and 1 year maintenance