Search results for "v20"

supports UBI32 Requires LA-3864 Converter ARM-20 to UBI32-10 if an UBI32-10 connector is used on the target only suitable for debug cables newer than 08/2008 please add the serial number of the existing debug cable to your order

supports 78K0R and RL78 cores (16-bit) includes software for Windows, Linux and MacOSX IDC20A debug cable requires Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, Power Debug II, PowerDebug E40 or PowerDebug PRO

supports a lot of SH2, SH3 and SH4 derivatives from Renesas includes software for Windows, Linux and MacOSX requires Power Debug Module debug cable with 14 pin connector Targets with 36 pin Hirose connector require the converter LA-7980 for ST40 targets please request debug cable with 20 pin connector

Supports off-chip RAM trace port for of TI chips if applied to an AUTOFOCUS II preprocessor please add the serial number of the preprocessor to your order AUTOFOCUS II Preprocessors with serial number C0806xxxxxx and lower have to be send to Lauterbach Germany for an hardware upgrade May require LA-3835 Converter Mictor38/ETM+IDC20A to Mictor-38/RTP

Converter from 14 Pin JTAG/OnCE MPC5XXX to AUTO26/20/10 use with LA-7753 JTAG Debugger Qorivva MPC5xxx/SPC5xxx (ICD) to connect to targets designed for LA-2708 (Debugger for MPC5xxx Automotive PRO) LA-3206 Debugger for MPC5xxx AUTO26 (PACK) LA-3736 (JTAG Debugger for MPC5xxx Automotive)

Supports TriCore, PCP and GTM debugging included. Supports JTAG, DAP, DXCPL, DXCM. Supports DAP streaming under certain conditions (see below). Includes the TRACE32 software for Windows, Linux and macOS on DVD and for download. Requires PowerDebug Interface USB 2.0/USB 3.0, PowerDebug Ethernet, PowerTrace Ethernet, PowerDebug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50. Requires LA-3849 if 16 pin JTAG (TriCore) connector is used. DAP Streaming is supported if you use the device with a PowerDebug PRO,E40, or X50 and your PowerView software is version R.2023.09 or newer (build 160619 or higher). If these requirements are met, DAP Streaming is possible only in DAP mode (DAP2, DAP3, DAPWide, DAP4). For performance reasons, we recommend DAPWide at 320 MHz. Trace display and analysis (based on DAP streaming, onchip-buffers, or a PowerTrace) requires LA-3799X (Trace License for TriCore ED). For DXCPL/DXCM you will probably also need the CAN-Box (LA-3889).

Converter from Intel MIPI60-Cv2 to MIPI34 pin-out on target Converts termination scheme Intel (50 Ohm parallel termination at receiver) to termination scheme ARM (50 Ohm series termination at sender) Support for JTAG/SWD Maps Intel specific debug signals to MIPI34 pins. Default mapping: Intel PREQ -> DBGREQ (pin 18 on MIPI34) Intel PRDY -> DBGACK (pin 20 on MIPI34) Intel HOOK6 (PMODE) -> RTCK (pin 12 on MIPI34) Intel HOOK0 (PowerGood) -> BCE (pin 14 on MIPI34) Intel HOOK7 (ResetOut) -> RESET (pin 10 on MIPI34) TVREF (trace reference voltage) == DVREF (debug reference voltage) For other possible options, please contact Lauterbach.