Product Catalogue
Find TRACE32 product
supports (1.8V - 5.0V) PPC603, MPC74x and MPC75x includes software for Windows, Linux and MacOSX requires Power Debug Module debug cable with 16 pin connector
Supports Qorivva MPC57xx/SPC57XX Aurora NEXUS (high-speed trace port) please add the serial number of the preprocessor to your order
JTAG Debugger for PPC603/MPC74x/75x requires a valid software guaranty or a valid software maintenance key please add the serial number of the existing debug cable to your order
Support for On-Chip and Off-Chip Trace for Qorivva MPC57XX and SPC57X/SPC58X please add the serial number of the base debug cable to your order
Support for On-Chip and Off-Chip Trace for Qorivva MPC57XX and SPC57X/SPC58X Please add the base serial number of your existing serial preprocessor or PowerTrace Serial to your order.
supports (1.8V - 5.0V) PPC40x includes software for Windows, Linux and MacOSX requires Power Debug Module debug cable with 16 pin connector
Serial Trace Port Controller with 4 Giga Byte Trace Memory for MPC57xx/SPC5 Required converter: - Samtec34 on target requires LA-3871: Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec34 including Samtec 34-pin flex extension cable - Samtec22 on target requires LA-3872: Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec22 including Samtec 22-pin flex extension cable requires PowerDebug II Ethernet or PowerDebug PRO Host requirements: USB 3.0 or 1000 MBit Ethernet interface, 4.0 GigaByte RAM voltage range 0.15V to 1.25V
supports Qorivva MPC5xxx/SPC5xxx (e200 cores) and Freescale PX SERIES processors eTPU, GTM and SPT debugging included includes software for Windows, Linux and MacOSX requires Power Debug Module Concurrent debugging of multiple e200 cores on multicore processors requires a License for Multicore Debugging (LA-7960X) (not necessary for lockstep mode) debug cable with 14 pin connector
supports PPC40x please add the serial number of the existing debug cable to your order
Aurora NEXUS Preprocessor for Qorivva MPC57xx/SPC5 (high-speed serial trace port) - supports reference clock output up to 3125MHz POWER TRACE II: full support Supported speeds per lane: 4 lanes @ 4.25Gbps 3 lanes @ 6.0Gbps 2 lanes @ 6.25Gbps 1 lane @ 6.25Gbps POWER TRACE ETHERNET or POWER TRACE PX limited support Supported speeds per lane: 4 lanes @ 1.25 GBPS 2 lanes @ 2.5 GBPS - POWER TRACE ETHERNET module must have serial number E04xxxxxxxx or higher Required converter: - Samtec34 on target requires LA-3871: Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec34 including Samtec 34-pin flex extension cable - Samtec22 on target requires LA-3872: Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec22 including Samtec 22-pin flex extension cable voltage range 0.15V to 1.25V
supports PPC40x requires a valid software guaranty or a valid software license key please add the serial number of the existing debug cable to your order
Supports MicroBlaze. Debug cable with 16 pin connector (PPC16). Includes software for Windows, Linux and macOS. Requires Power Debug Module or PowerTrace.
Parallel NEXUS Adapter with AutoFocus technology for Qorivva MPC5xxx/SPC5xxx and PX series includes debugger for eTPU and GTM Concurrent debugging of multiple e200 cores on multicore processors requires a License for Multicore Debugging (LA-7960X) (not necessary for lockstep mode) Voltage range: 1..5 V TRACE port: 2..16 MDO (data) lines 1..2 MSEO (control) lines Data Bandwidth: up to 200 MBit/s 76-pin mictor connector requires one of the following converters LA-7631 for Mictor 38 on target LA-7632 for Glenair 51 on target LA-7636 for SAMTEC 50 on target LA-7637 for SAMTEC 20 on target includes software for Windows, Linux and MacOSX requires PowerTrace hardware usage with PowerTrace III requires TRACE32 software DVD 2021/09 or newer please contact Lauterbach if the serial number of your PowerTrace is lower than E03010003982
supports (1.8V - 5.0V) PPC440 includes software for Windows, Linux and MacOSX requires Power Debug Module debug cable with 16 pin connector requires LA-7986 if the target has a Mictor38 connector
supports PPC440 please add the serial number of the existing debug cable to your order
Trace recorder for serial high-speed ports with 4 Gigabyte trace memory for MPC57xx/SPC5xx Records up to 8 lanes with 12.5 Gbit/s per lane (more with opt. Prepro.) Voltage range: 0.15 to 1.25 differential voltage. Includes converter for Samtec40 target connector. For Samtec34 target connector add LA-3871: Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec34 including Samtec 34-pin flex extension cable For Samtec22 target connector add LA-3872: Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec22 including Samtec 22-pin flex extension cable Requires PowerDebug X50, PowerDebug PRO, or PowerDebug II. Requires PC with USB 3 or Gigabit Ethernet, 4 GB RAM min, and 64-bit OS.
Trace recorder for serial high-speed ports with 8 Gigabyte trace memory for MPC57xx/SPC5xx Records up to 8 lanes with 12.5 Gbit/s per lane (more with opt. Prepro.) Voltage range: 0.15 to 1.25 differential voltage. Includes converter for Samtec40 target connector. For Samtec34 target connector add LA-3871: Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec34 including Samtec 34-pin flex extension cable For Samtec22 target connector add LA-3872: Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec22 including Samtec 22-pin flex extension cable Requires PowerDebug X50, PowerDebug PRO, or PowerDebug II. Requires PC with USB 3 or Gigabit Ethernet, 4 GB RAM min, and 64-bit OS.
Aurora NEXUS Preprocessor for Qorivva MPC57xx/SPC5 (high-speed serial trace port) - supports reference clock output up to 3125MHz POWER TRACE II / III: full support Supported speeds per lane: 4 lanes @ 4.25Gbps 3 lanes @ 6.0Gbps 2 lanes @ 6.25Gbps 1 lane @ 6.25Gbps POWER TRACE ETHERNET or POWER TRACE PX limited support Supported speeds per lane: 4 lanes @ 1.25 GBPS 2 lanes @ 2.5 GBPS - POWER TRACE ETHERNET module must have serial number E04xxxxxxxx or higher Required converter: - Samtec34 on target requires LA-3871: Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec34 including Samtec 34-pin flex extension cable - Samtec22 on target requires LA-3872: Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec22 including Samtec 22-pin flex extension cable voltage range 0.15V to 1.25V
Supports off-chip trace port for PPC4XX if applied to an AUTOFOCUS II preprocessor Requires LA-7986 Mictor38-Mictor38-JTAG 16pin Conv. for PPC4XX please add the serial number of the preprocessor to your order AUTOFOCUS II Preprocessors with serial number C0806xxxxxx and lower have to be send to Lauterbach Germany for an hardware upgrade
Program flow trace for PPC4xx 720 MHz clock speed, (180 MHz trace clock) 0.9-3.3V, connector cable and software Requires PowerTrace II, PowerTrace PX or PowerTrace/Ethernet Version 6 or higher requires LA-7983 Conv. 38 Pin Mictor to 20 for Preproc. PPC4xx if the target has a 20 pin male connector