Product Catalogue

Converter 26-pin AUTO26 Debug Cable to IDC20A / IDC20A-ETK / TI-14 Former name: Converter AUTO26 to ARM20, ARM20-ETK or TI14

IDC20A debug cable with 20 pin connector to support MicroBlaze cores. Includes software for Windows, Linux and macOS. Requires PowerDebug module. You may want to add one the following converters: LA-3881 Converter IDC20A to XILINX-14 if a 14-pin Xilinx connector is used LA-3860 Converter IDC20A to PPC4xx-16 if a 16-pin PPC4xx connector is used

Converter to connect an IDC20A Debug Cable to a 14-pin JTAG connector on Xilinx target boards.

Converter to connect an IDC20A Debug Cable to a MIPS-14 connector on the target Former name: Converter ARM-20 to MIPS-14

Converter to connect an IDC20A Debug Cable to a standard 6-pin "Pmod™" connector “Pmod™” is a trademark of Digilent Inc Former name: Conv. ARM-20 to Digilent PMOD

Converter to connect an IDC20A Debug Cable to a TI-14 connector which is used on many targets with processors from Texas Instruments Former name: Converter ARM-20 to TI-14

Converter to connect the IDC20A Debug Cable to a Mictor connector on the target providing both debug and trace signals. This is needed if you want to connect the Debug Cable without a Preprocessor and if there is only a Mictor on the target. Former name: ARM Converter ARM-20 to Mictor-38

Converter from a MIPI20T to an IDC20A debug connector, designed to connect the debug signals of a MIPI20T-HS Whisker (from a CombiProbe or MicroTrace) to a target with IDC20A connector. Can be used for debugging if an IDC20A connector is mounted on the target, which is used on many targets with Arm SoCs or Arm-compatible SoCs. There is a pin header to optionally receive trace signals from elsewhere.

Supports Intel XSCALE derivatives. Includes license for trace decoding. Uses IDC20A debug cable, which supports 5-pin standard JTAG, cJTAG (IEEE 1149.7) and Serial Wire Debug (SWD), (0.4V - 5V) Includes software for Windows, Linux and macOS. Requires PowerDebug base module.

Supports Hexagon from Qualcomm Includes license for multicore debugging and trace decoding. Uses IDC20A debug cable, which supports 5-pin standard JTAG, cJTAG (IEEE 1149.7) and Serial Wire Debug (SWD), (0.4V - 5V) Includes software for Windows, Linux and macOS. Requires PowerDebug base module.

Supports ARC EM/HS/EV/VPX, ARC 600/700, ARCtangent-A4/A5 Uses IDC20A debug cable, which supports 5-pin standard JTAG, cJTAG (IEEE 1149.7) and Serial Wire Debug (SWD), (0.4V - 5V) Includes software for Windows, Linux and macOS. Requires PowerDebug base module.

Converter to connect an Arm Debug Cable V1 (ARM-14) to IDC20A or to connect a newer IDC20A Debug Cable to ARM-14 target connector ARM-14 is an obsolete connector specification, do not use for new designs Former name: ARM Converter ARM-20 to/from ARM-14

Converter 20 pin IDC20A to RL78 14 pin Renesas Former name: Converter ARM-20 to RL78-14

Supports VSPA Uses IDC20A debug cable, which supports 5-pin standard JTAG, cJTAG (IEEE 1149.7) and Serial Wire Debug (SWD), (0.4V - 5V) Includes software for Windows, Linux and macOS. Requires PowerDebug base module. Not supported are the very old 1st Gen. PowerDebug modules LA-7702 (without USB) and LA-7704 (with USB 1.1).

Converter for JTAG 14 pins to IDC20A connector for SH2/3/4 processors Former name: Converter H-UDI 14 to JTAG 20

Supports Xtensa Cores from Tensilica via an ARM JTAG interface Core trace decoding for TRAX (Trace RAM within core logic) included IDC20A debug cable, which supports 5-pin standard JTAG, cJTAG (IEEE 1149.7) and serial Wire Debug (SWD), (0.4V - 5V) Includes software for Windows, Linux and macOS Requires PowerDebug module Requires LA-3763 if 14 pin JTAG (Xtensa) connector is used

Converter for IDC20A pins to H-UDI 14 connector for SH2/3/4 processors Former name: Converter JTAG 20 to H-UDI 14

Supports CEVA-X. Uses IDC20A debug cable, which supports 5-pin standard JTAG, cJTAG (IEEE 1149.7) and Serial Wire Debug (SWD), (0.4V - 5V) Includes software for Windows, Linux and macOS. Requires PowerDebug base module.

Converter to connect an IDC20A Debug Cable to a 16 pin PowerPC connector (PPC4xx)

Upgrade from debug cable with 16 pins (PPC16) to IDC20A debug cable with 20 pins for MicroBlaze Please add the base serial number of your old debug cable to your order. Your old debug cable must be returned on receipt of the new one. Includes 1 year software guarantee.