Product Catalogue
Find TRACE32 product
Converter from IDC20A connector to Altera 10-pin (Byteblaster) or RISC-V 10-pin Target connector pitch can be 2.54mm or 1.27mm (half size)
supports RISC-V MIPI10 / MIPI20 connector on the target required: LA-3770 ARM Converter ARM-20 to MIPI-10/20/34 ALTERA-10/RISCV-10 connector on the target required: LA-3863 Converter ARM-20 to ALTERA-10/RISCV-10 includes software for Windows, Linux and MacOSX requires Power Debug Module voltage range 1.8V to 3.6V
Supports RISC-V 32-bit cores MIPI10 / MIPI20 connector on the target requires: LA-3770 Converter IDC20A to MIPI-10/20/34 ALTERA-10/RISCV-10 connector on the target requires: LA-3863 Converter IDC20A to ALTERA-10/RISCV-10 Includes software for Windows, Linux and macOS. Requires TRACE32 software R.2020.09 or newer. Requires Power Debug Module
Supports RISC-V 64-bit cores Multicore debugging included MIPI10 / MIPI20 connector on the target requires: LA-3770 Converter IDC20A to MIPI-10/20/34. ALTERA-10/RISCV-10 connector on the target requires: LA-3863 Converter IDC20A to ALTERA-10/RISCV-10. Includes software for Windows, Linux and macOS. Requires TRACE32 software R.2020.09 or newer. Requires Power Debug Module.
Converter to connect the CombiProbe to a SD or Micro SD card connector in case the signals alternatively provide debug functionality
Converter to connect an ARM Preprocessor and a CombiProbe to a Mictor connector on the target. This converter is designed for the OMAP3503 board from Spectrum Digital. The upper ETM signals on the Mictor can alternatively be used for system trace (SDTI).
Floating license for debugging of several cores of the same main architecture-family running on Emulators or Virtual Targets in Asymmetric Multi-Processing (AMP) configuration. You need a suitable debug Front-End license in addition to the license. Allows together with one TRACE32 Front-End license to use up to 8 TRACE32 PowerView GUIs of the same processor architecture on the same host machine. Alternatively 2 identical TRACE32 Front-End licenses can be used. The up to 8 TRACE32 GUIs are assigned to a license pool. All required TRACE32 Back-End, Trace and Integration licenses are added to the same license pool.
Preprocessor for Real-Time Trace of MICROBLAZE Requires Xilinx Vivado 2018.3 or later or Vivado 2018.2 with special patch from Xilinx (see https://www.xilinx.com/support/answers/71422.html#). 250 MHz clock speed Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Supports 1.2 to 3.3V - else contact support Requires PowerTrace Version 6 or higher or PowerTrace II / III voltage range 1.2V to 3.3V
Supports off-chip trace port for MicroBlaze if applied to an AUTOFOCUS II preprocessor Requires LA-7986 Mictor38-Mictor38-JTAG 16pin Conv. for PPC4XX Requires Xilinx Vivado 2018.3 or later or Vivado 2018.2 with special patch from Xilinx (see https://www.xilinx.com/support/answers/71422.html#). please add the serial number of the preprocessor to your order AUTOFOCUS II Preprocessors with serial number C0806xxxxxx and lower have to be send to Lauterbach Germany for an hardware upgrade
General documentation of the TRACE32 Tool Qualification Support-Kit. Includes general documentation and the following test suites: - Debug - Coverage Includes additionally test suite - TRACE32 TriCore Instruction Set Simulator which requires LA-8096L 1 User Floating Lic. ISS Test Suite TriCore - TRACE32 M68K Instruction Set Simulator which requires LA-8097L 1 User Floating Lic. ISS Test Suite 68K Each test suite contains a set of test cases, corresponding test case documentation and results. Downloadable after registration in TRACE32 TQSK Customer Portal For Windows, Linux, and macOS.