Adaptation for CEVA-X Preprocessor


The embedded tools company



 

Target Adaptation of Trace Probe "CEVA-X" with Mictor-38


Products

Order No.Probe
LA-3335Trace for CEVA-X via AutoFocus II (PACK) 
LA-7996Preproc. for Ceva-X AUTOFOCUS II Flex out of production


Target Connector Type


Tyco Part NumberDescription
2-5767004-2Vertical, surface mount, board to board/cable connector, RoHS compliant.

Link to Tyco Electronics

Target Connector Placement

The adaption uses one or two 38 pin Mictor connectors.
The second connector is only needed if the target trace port provides more than 16 trace data pins and for 8/16 bit demuxed mode.
A separation distance of 1350 mil is required if adaption without flex cable is intended.
We recommend to place the even numbered pins at the PCB border side (flex cable won't be twisted).

Debug Signals

The pinout of the Mictor connector optionally includes the debug signals which needs to go to the Debug Cable
(20-pin standard header). The Preprocessors have a 20-pin connector where the user can plug in the Debug Cable.
Alternatively the Debug Cable can be plugged on a separate 20-pin connector on the target. In this case there is no
need to connect the debug signals to the Mictor. For better signal quality it is better not to connect them.
The debug signals are DBGRQ, RESET-, TDO, RTCK, TCK, TMS, TDI, TRST- DBGACK, VREF-DEBUG.



ETMv3, Normal and Continuous Mode (typically used)


Connector 1
Signal

Pin

 Pin

Signal

    
N/C12N/C
N/C34N/C
GND56TRACECLK
DBGRQ78DBGACK
RESET-910EXTRIG
TDO|-|SWO1112VREF-TRACE
RTCK1314VREF-DEBUG
TCK|TCKC|SWCLK1516TRACEDATA[7]
TMS|TMSC|SWDIO1718TRACEDATA[6]
TDI1920TRACEDATA[5]
TRST-2122TRACEDATA[4]
TRACEDATA[15]2324TRACEDATA[3]
TRACEDATA[14]2526TRACEDATA[2]
TRACEDATA[13]2728TRACEDATA[1]
TRACEDATA[12]2930GND
TRACEDATA[11]3132GND
TRACEDATA[10]3334VCC
TRACEDATA[9]3536TRACECTL
TRACEDATA[8]3738TRACEDATA[0]
    
Connect Pin 39,40,41,42,43 to GND


VCC needs to have VREF-TRACE level.

Connector 2 (only needed if more than 16 data bit)
Signal

Pin

 Pin

Signal

    
N/C12N/C
N/C34N/C
GND56N/C
N/C78N/C
N/C910N/C
N/C1112N/C
N/C1314N/C
N/C1516TRACEDATA[23]
N/C1718TRACEDATA[22]
N/C1920TRACEDATA[21]
N/C2122TRACEDATA[20]
TRACEDATA[31]2324TRACEDATA[19]
TRACEDATA[30]2526TRACEDATA[18]
TRACEDATA[29]2728TRACEDATA[17]
TRACEDATA[28]2930GND
TRACEDATA[27]3132GND
TRACEDATA[26]3334VCC
TRACEDATA[25]3536GND
TRACEDATA[24]3738TRACEDATA[16]
    
Connect Pin 39,40,41,42,43 to GND


VCC needs to have VREF-TRACE level.

 

Converter






Copyright © 2024 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany   Impressum     Privacy Policy
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice. Report Errors
Last generated/modified: 07-Mar-2024