Adaptation for NXP JN51xx


The embedded tools company
Debugger Adaptation for NXP



 

Debugger Adaptation for NXP


Products



Order No.Probe
LA-3890Converter Beyond to NXP on request, please contact Lauterbach

Connector 10 pin


Signal

Pin

 Pin

Signal

    
TCK12GND
TDO34VTREF
TMS56NTRST
MISO78NRESET
TDI910GND
    


Target Connector 2.54mm for Debugger Adaptation for NXP

Dimension

Connector Type

  • This is a standard 10 pin double row (two rows of 5 pins) connector (pin to pin spacing: 2.54mm/0.100").

Target Connector Placement

  • If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 20.5mm.
  • If the even numbered pins of the connector show to the edge of the PCB, then the flat cable goes straight off the PCB.

Target Connector 1.27mm (Half Size) for Debugger Adaptation for NXP

PinsSamtec Order No
10FTSH-105-01-L-DV-K

Dimension

SAMTEC Connector Dimensions




Copyright © 2024 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany   Impressum     Privacy Policy
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice. Report Errors
Last generated/modified: 07-Mar-2024