Converter Mictor-38 to MIPI-20/34
This converter is typically needed when using an AutoFocus II preprocessor and an IDC20A debug cable to record the 4-bit wide trace port on a MIPI-20T or MIPI-34 connector.
Recommended Target Connector
Pinout 20-Pin Connector
Jumper Settings 20-Pin Connector
Pinout 34-Pin Connector
Pinout 10-Pin Connector
Usage of adapter with 10-pin connector is not a use case because there are no trace signals for the AutoFocus II preprocessor. It could be used for debugging only.
Jumper Settings 10-Pin Connector
Copyright © 2023 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice. Report Errors
Last generated/modified: 02-Jan-2023