Adaptation for Converter AVR8 10 Pin JTAG to 6 Pin UPDI


The embedded tools company




Support
Technical Support
 

Adaptation for Converter AVR8 10 Pin JTAG to 6 Pin UPDI


The debugger has a 10 pin connector and is connected via converter to 6 pin double row connector to the target.

Products

Order No.Probe
LA-2733Converter AVR8 10 Pin JTAG to 6 Pin UPDI 

Connector 6 pin


Signal

Pin

 Pin

Signal

    
UPDI12VCC
N/C34N/C
N/C56GND
    


Target Connector for Debugger Adaptation to 6 Pin UPDI

Connector Type

  • This is a standard 6 pin double row (two rows of 3 pins) connector (pin to pin spacing: 2.54mm/0.100").
  • If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 15.5mm/0.61".




Copyright © 2024 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany   Impressum     Privacy Policy
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice. Report Errors
Last generated/modified: 07-Mar-2024