Adaption for M-CORE ONCE Connector

Debugger Connector for M-CORE

Connector 14 pin

Signal	Pin		Pin	Signal
TDI	1		2	GND
TDO	3		4	GND
TCLK	5		6	GND
(GPIO-SI-)	7		8	N/C
RESET-	9		10	TMS
VDD TARGET	11		12	DE-
(!GPIO-SO)	13		14	TRST-

• Signals in brackets are not strong necessary for basic debugging, but its recommended to take in consideration for future designs.

Schematics

Target Connector for Debugger Adaption for M-CORE

Dimension

Connector Type

• This is a standard 14 pin double row (two rows of 7 pins) connector (pin to pin spacing: 2.54mm/0.100").
• If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 23mm/0.9".

Half-Size Adapters

Half-Size Adapters for Debuggers

100 mil to 50 mil Adapters Small Footprint for Target Connector