ARM Converter MIPI-34 to ARM-20 or TI-14


The embedded tools company




Dim
Modules
Adaptions
Dimensions
Order
Order
Information
Support
Technical Support

Product

Order No.Probe
LA-3771ARM Converter MIPI-34 to ARM-20 or TI-14 



Pinout Connector 20 pin (ARM)

Signal

Pin

 Pin

Signal

    
VREF-DEBUG12VSUPPLY (not used)
TRST-34GND
TDI56GND
TMS|TMSC|SWDIO78GND
TCK|TCKC|SWCLK910GND
RTCK1112GND
TDO|-|SWO1314GND
RESET-1516GND
DBGRQ1718GND
DBGACK1920GND
    

Dimension

  • This is a standard 20 pin double row (two rows of 10 pins) connector (pin to pin spacing: 2.54mm/0.100").
  • If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 30.6mm/1.2".


Pinout Connector 14 pin (TI)

Signal

Pin

 Pin

Signal

    
TMS|TMSC|SWDIO12TRST-
TDI34GND
VREF-DEBUG56GND (KEY)
TDO|-|SWO78GND
RTCK910GND
TCK|TCKC|SWCLK1112GND
EMU01314EMU1
    

Dimension

  • This is a standard 14 pin double row (two rows of 7 pins) connector (pin to pin spacing: 2.54mm/0.100").
  • If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 23mm/0.9".




Copyright © 2017 Lauterbach GmbH, Altlaufstr.40, D-85635 Höhenkirchen-Siegertsbrunn, Germany  Impressum
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice. Report Errors
Last generated/modified: 10-May-2017