ARM Converter ARM-20 to MIPI-10/20/34


The embedded tools company


  Introduction
Converter to connect a standard ARM-20 Debug Cable to a MIPI connector.

The MIPI connector can have 10, 20 or 34 pins.

Especially the 10 and 20 pin connectors require significantly lesser space on the target board, comparing to the standard ARM-20 connector.

The 10 or 20 pin connectors are sufficient for pure debugging. The 34 pin connector has reserved pins, which are intended to connect a trace tool like the Lauterbach CombiProbe to your target board (instead of the standard ARM-20 Debug Cable).


Order
Order
Information
Support
Technical Support

Product

Order No.Probe
LA-3770ARM Converter ARM-20 to MIPI-10/20/34 

Pinout 10 Pin Connector

Signal

Pin

 Pin

Signal

    
VREF-DEBUG12TMS|TMSC|SWDIO
GND34TCK|TCKC|SWCLK
GND56TDO|-|SWO
GND (KEY)78TDI
GND910RESET-
    

Pinout 20 Pin Connector

Signal

Pin

 Pin

Signal

    
VREF-DEBUG12TMS|TMSC|SWDIO
GND34TCK|TCKC|SWCLK
GND56TDO|-|SWO
GND (KEY)78TDI
GND910RESET-
GND1112RTCK
GND1314TRST- PULLDOWN
GND1516TRST-
GND1718EDBGRQ (EMU0)
GND1920DBGACK (EMU1)
    

Pinout 34 Pin Connector

Signal

Pin

 Pin

Signal

    
VREF-DEBUG12TMS|TMSC|SWDIO
GND34TCK|TCKC|SWCLK
GND56TDO|-|SWO
GND (KEY)78TDI
GND910RESET-
GND1112RTCK
GND1314TRST- PULLDOWN
GND1516TRST-
GND1718EDBGRQ (EMU0)
GND1920DBGACK (EMU1)
GND2122NOT USED
GND2324NOT USED
GND2526NOT USED
GND2728NOT USED
GND2930NOT USED
GND3132NOT USED
GND3334NOT USED
    

Recommended Target Connector

PinsSamtec Order No
34FTSH-117-01-L-DV-K
20FTSH-110-01-L-DV-K
10FTSH-105-01-L-DV-K

SAMTEC Connector Dimensions
Link to SAMTEC

Further Converting

Converter MIPI-34 to SD or Micro SD Socket







Copyright © 2016 Lauterbach GmbH, Altlaufstr.40, D-85635 Höhenkirchen-Siegertsbrunn, Germany  Impressum
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice. Report Errors
Last generated/modified: 13-Dec-2016