TRACE32 Debugger for PMB8870
TRACE32 Debugger for PMB8870 |
|
||
|
|
|||
|
| |||
| Note: | This page relates to Chip | State | Company | Alternative Configurations |
| PMB8870 (S-GOLD) | Infineon Technologies AG | |||
Configuration Example
TRACE32 Features and Support Contacts
|
|
||
| |||
|
|
||
| |||
|
|
||
| |||
|
|
||
| |||
|
|
||
| |||
| |||
 | |
Compiler Interfaces
|
|
||
| |
Target OS SupportBootloader
|
|
||
| |
Software-only Debuggers
 |
|
|
| |
Software Updates| OS | Description | File | Date | Size |
| Windows64 | Update for Cortex-A/-R/-M, ARM7/9/11, XScale |  trace32_arm...9.zip | 28-10-2018 | 271.95MB |
| OS | Description | File | Date | Size |
| Linux64 | Update for Cortex-A/-R/-M, ARM7/9/11, XScale | trace32_arm...9.tar.gz | 28-10-2018 | 270.73MB |
Peripheral Definitions and MenusManualsStartup And Demo ScriptsOrder Information| Cart - Get Quote | ||||
| Delete | Order No. | Quantity | Description | |
| Get Quote | Refresh | |||
| Standard Products | ||||
| Order No. | Code | Text | Dimensions | |
|---|---|---|---|---|
LA-3500  | DEBUG-USB3 | PowerDebug Module USB 3.0
Universal debug controller with USB 3.0 for Windows/Linux/MacOSX applicable for all TRACE32 debug cables requires TRACE32 software DVD 2013/02 or newer |  Dimension | |
| LA-3505 | POWER-DEBUG-PRO | PowerDebug PRO Ethernet
Universal debug controller, 1 Gbit Ethernet and USB 3.0 (Windows/Linux/MacOSX) | Dimension | |
| LA-7742 | JTAG-ARM9 | JTAG Debugger for ARM9
supports ARM9 (0.4 V - 5 V) supports 5-pin standard JTAG, cJTAG and Serial Wire Debug Port includes software for Windows, Linux and MacOSX requires Power Debug Module cJTAG and SWD require Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, PowerTrace, Power Debug II or PowerDebug PRO | Dimension  Adaptation | |
| LA-7742X | JTAG-ARM9-X | JTAG Debugger Extension for ARM9
supports ARM9 requires a valid software guarantee or a valid software maintenance key please add the serial number of the base debug cable to your order | ||
| LA-7789A | JTAG-OAK-SEIB-A | JTAG Debugger for TeakLite/OAK SEIB (ICD)
supports S-GOLD, S-GOLDlite, E-GOLDlite, X-GOLD please add the serial number of the base debug cable to your order | ||
| LA-3580 | POWER-TRACE-II-512MB | PowerTrace II Lite 512 MB
Universal Trace Port Controller, 512 MegaByte Trace Memory Streaming rate up to 50 MByte/s requires PowerDebug II Ethernet or PowerDebug PRO | Dimension | |
| LA-7694 | POWER-TRACE-II-4G | PowerTrace II 4 GigaByte
Universal Trace Port Controller, 4 Giga Byte Trace Memory includes logic analyzer with 17 digital channels, 1024 KSamples requires PowerDebug II Ethernet or PowerDebug PRO Host requirements: USB 2.0 or 100/1000 MBit Ethernet interface, 1.0 GigaByte RAM | Dimension | |
| LA-7992 | PP-ARM-ETM-AF-2 | Preproc. for ARM-ETM/AUTOFOCUS II 600 Flex
Parallel preprocessor for ARM/Cortex Embedded Trace Macrocell (ETM), Program Trace Macrocell (PTM) Connector cable and software, 600 MBaud (300MHz clock speed, DDR) Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Support all ETM modes, with 2 MICTOR connectors, Supports 1.2 to 3.3V - else contact support Requires PowerTrace II, PowerTrace PX or PowerTrace/Ethernet Version 6 or higher | Dimension Adaptation | |
| LA-8890L | FRONTEND-ARM-FL | 1 User Floating License ARM Front-End
TRACE32 Front-End connecting to - third-party virtual target/simulators - third-party target server such as GDB - TRACE32 Back-End supports ARM, Cortex and XScale floating license via RLM (Reprise License Manager) Please add the RLM HostID of the license server to your order (please see our FAQ) | ||
| LA-2804L | SIMULATOR-ARM-FL | 1 User Float. Lic. TRACE32 ARM Simulator
Floating license to use the TRACE32 Instruction Set Simulator for automated tests via script language PRACTICE or via the TRACE32 Remote API supports ARM/Cortex for Windows32, Windows64, Linux32, Linux64 and Solaris, other platforms on request floating license via RLM (Reprise License Manager) Please add the RLM HostID of the license server to your order (please see our FAQ) | ||
| Product Options | ||||
| Order No. | Code | Text | Dimensions | |
| LA-2720 | CON-ARM20-MIPS14 | Converter ARM-20 to MIPS-14
Converter to connect an ARM Debug Cable to a MIPS-14 connector on the target | Adaptation | |
| LA-3722 | CON-JTAG20-MICTOR | ARM Converter ARM-20 to Mictor-38
Converter to connect the ARM Debug Cable to a Mictor connector on the target providing both debug and trace signals. This is needed if you want to connect the Debug Cable without a Preprocessor and if there is only a Mictor on the target. Suitable for MMDSP and ARC as well. | Dimension Adaptation | |
| LA-7748 | JTAG-ARM-CON-20-TI14 | Converter ARM-20 to TI-14
Converter to connect a Debug Cable to a TI-14 connector which is used on many targets with processors from Texas Instruments | Adaptation | |
| LA-3780 | JTAG-ARM-CON-20-TI20 | Converter ARM-20 to TI-14 or TI-20-Compact
Converter to connect a Debug Cable to a TI-14 or TI-20-Compact connector which is used on many targets with processors from Texas Instruments. | Adaptation | |
| LA-3770 | CONV-ARM20/MIPI34 | ARM Converter ARM-20 to MIPI-10/20/34
Converter to connect a Debug Cable to 10/20/34 pin connectors specified by MIPI. Converts to CombiProbe connector | Adaptation | |
| LA-7747 | JTAG-ARM-CON-14-20 | ARM Converter ARM-20 to/from ARM-14
Converter to connect an ARM Debug Cable V1 (ARM-14) to ARM-20 or to connect a newer ARM Debug Cable (ARM-20) to ARM-14 target connector ARM-14 is an obsolete connector specification, do not use for new designs | Adaptation | |
| LA-3726 | JTAG-ARM-CON-20-20 | ARM Converter 2x ARM-20 to ARM-20
Converter to connect two ARM Debug Cable to one connector on the target. Old method to handle multicore debugging by using two debugger hardware modules. | Adaptation | |
| LA-3863 | CON-ARM-ALTERA | Converter ARM-20 to ALTERA-10/RISCV-10
Converter from ARM 20-pin connector to Altera 10-pin (Byteblaster) connector or RISC-V 10-pin Target connector pitch can be 2.54mm or 1.27mm (half size). | Adaptation | |
| LA-3501 | GALVANIC-ISOLATION | Galvanic Isolation for Debug Cable
Galvanic isolation for ARM debug cable for automotive debug cable Components rated to IEC60950-1 (600 V working voltage) | ||
| LA-3788 | DAISY-CHAINER-JTAG20 | Daisy Chainer 4 JTAG 20
Merges up to 4 JTAG interfaces to a daisy-chain requires that all JTAG interfaces use the same VTREF includes 4 JTAG Cable 20 Pin (LA-1968) | ||
| LA-2101 | AD-HS-20 | Adapter Half-Size 20 pin
Adapter 20 pin 100 mil to 50 mil with cable. Purpose: Use 20-pin Debug Cable with smaller target connector. In case of ARM Debug Cable better use MIPI-10 or MIPI-20 for new designs. | Dimension Adaptation | |
| LA-3818 | CONV-AFMIC38-MIPI60 | Conv. Prepro.AF II Mictor, ARM20 to MIPI60
Converter to connect Preprocessor AUTOFOCUS II Mictor38 to MIPI60 (QSH) connector ARM/Cortex: Converter to connect Mictor38 TRACE A and TRACE B (32-bit ETMv3) and an ARM Debug Cable to a MIPI60 connector on the target x86/x64: Converter to connect Mictor38 TRACE A to to a MIPI60 connector on the target | Dimension Adaptation | |
| LA-3809 | CONV-ARM-MIC/MIPI20 | Converter Mictor-38/ARM20 to MIPI-20
Converter to connect an ARM Preprocessor with MICTOR-38 and a ARM debug cable with JTAG20 to a 20 pin connector specified by MIPI and CoreSight It allows to use the Preprocessor on the 4 bit wide trace port of the MIPI-20 connector It can be re-configured for MIPI-34 | Dimension Adaptation | |
| LA-3816 | CON-2XMICTOR-MIPI60 | Converter 2x Mictor-38 to MIPI-60
Converter to connect an ARM Preprocessor to a MIPI-60 on the target. Suitable for up to 16-bit ETMv3. The converter is prepared to support various other configurations because all clock and data signals of the MIPI-60 are connected to the Preprocessor. | Dimension Adaptation | |
| LA-3840 | CONV-OMAP4430-PANDAB | Trace Converter for OMAP4430 PandaBoard
Converter to connect an ARM Preprocessor (16-bit PTM) or a CombiProbe (4-bit STM) to the OMAP4430 PandaBoard | Dimension | |
| LA-1370 | MICTOR-FLEXEXT | Mictor Flex Extension
110 mm flex extension for Mictor 38pin connector | Dimension | |
| LA-3768 | CON-ETM1-MIPI34SAM60 | ETMv1 Conv. Mictor-38, 2x MIPI-34 to MIPI-60
ARM Converter to connect an ARM Preprocessor with one Mictor-38 for 16-bit ETMv1 and two CombiProbes for two 4-bit system trace ports to a MIPI-60 connector on the target. | Adaptation | |
| LA-3769 | CONV-AFMIPI34-MIPI60 | Conv. Mictor-38, 2x MIPI-34 to MIPI-60
Converter to connect Preprocessor AUTOFOCUS II Mictor38 and 2 MIPI34 CombiProbes to MIPI60 (QSH) connector ARM/Cortex: Converter to connect Mictor38 TRACE A (16-bit ETMv3) and two MIPI34 CombiProbes to MIPI60 (QSH) connector on the target x86/x64: Converter to connect Mictor38 TRACE A and a MIPI34 CombiProbes to MIPI60 (QSH) connector on the target | Adaptation | |
| LA-3813 | CONV-OMAP35XX-MIPI | OMAP3 Conv. Mictor-38, MIPI-34 to Mictor-38
Converter to connect an ARM Preprocessor and a CombiProbe to a Mictor connector on the target. This converter is designed for the OMAP3503 board from Spectrum Digital. The upper ETM signals on the Mictor can alternatively be used for system trace (SDTI). | Adaptation | |
| LA-3810 | CONV-U8500-MIPI | U8500 Conv. 2x Mictor38, 3x MIPI34 to MIPI60
Converter to connect an ARM Preprocessor (up to 24-bit PTM/ETMv3) and up to three CombiProbes (3x STM/STP) to a MIPI-60 connector on the target. This converter is designed for U8500/U5500 from ST Ericsson. | Dimension Adaptation | |
| LA-3812 | CONV-OMAP4XXX-MIPI60 | OMAP4 Conv. 2xMictor, ARM20, MIPI34 to MIPI60
Converter to connect an ARM Preprocessor (up to 18-bit PTM) and one CombiProbe (STM; two connection options) or a Debug Cable to a MIPI-60 connector on the target. This converter is designed for OMAP4xxx based boards from Texas Instruments. | Dimension Adaptation | |
| LA-3814 | CON-ETM3-MIPI34+60 | ETMv3 Conv. Mictor-38, MIPI-34 to MIPI-60
ARM Converter to connect an ARM Preprocessor with one Mictor-38 for 16-bit ETMv3 and one CombiProbe for a 4-bit system trace port to a MIPI-60 connector on the target | Adaptation | |
|
Copyright © 2018 Lauterbach GmbH, Altlaufstr.40, D-85635 Höhenkirchen-Siegertsbrunn, Germany
Impressum
Privacy Policy
The information presented is intended to give overview information only. Changes and technical enhancements or modifications can be made without notice. Report Errors Last generated/modified: 23-Oct-2018 |
Get Quote
lauterbach.com
ADA
TRACE32 Help System
Show Allowed License/Converter Options
Hide Allowed License/Converter Options