Product Information


The embedded tools company



Cart
         
Delete Order No. Quantity Description
Get Quote Refresh


HARDWARE-BASED DEBUGGERS

LA-3500

add to cart

goto to cart

Universal debug controller with
USB 3.0 for Windows/Linux/MacOSX

applicable for all TRACE32 debug cables

requires TRACE32 software DVD 2013/02 or newer
LA-3505

add to cart

goto to cart

Universal debug controller,
1 Gbit Ethernet and
USB 3.0 (Windows/Linux/MacOSX)
LA-4532

add to cart

goto to cart

Supports 5-pin standard JTAG, cJTAG and
Serial Wire Debug Port for Arm Cortex-M cores

Bandwidth of 400 MBit/s per trace channel

includes 256-MByte of trace RAM to support:
- ITM via Serial Wire Output/TPIU
- ETM Cortex-M continuous mode via TPIU (4-bit)

Trace Streaming up to 100 MByte/s requires
USB 3.0 (SuperSpeed) capable host computer

Concurrent debugging of two or more
Cortex-M cores requires a
License for Multicore Debugging (LA-7960X)

Consists of
LA-4533 uTrace for Cortex-M Hardware
LA-4513 Whisker MIPI20T-HS CombiProbe/uTrace Arm
LA-2109 Half-Size-Cable 20-20 short
LA-2108 Half-Size-Cable 20-10 short
LA-1952 Power Supply for Power Debug USB
LA-1942 USB-2 Cable
LA-1943 USB-3 Cable
LA-2730 ARM Converter MIPI-20T to ARM-20

LA-4513U
Upgrade to Whisker MIPI20T-HS

add to cart

goto to cart

Upgrade to Whisker Cable MIPI20T/MIPI10
for CombiProbe/uTrace

Your old Whisker Cable MIPI34 must be returned on
receipt of the replacement Whisker Cable MIPI20T-HS
LA-4530

Supports 5-pin standard JTAG, cJTAG and
Serial Wire Debug Port for Arm Cortex-M cores

Bandwidth of 200 MBit/s per trace channel

includes 256-MByte of trace RAM to support:
- ITM via Serial Wire Output/TPIU
- ETM Cortex-M continuous mode via TPIU (4-bit)

Trace Streaming up to 100 MByte/s requires
USB 3.0 (SuperSpeed) capable host computer

Concurrent debugging of two or more
Cortex-M cores requires a
License for Multicore Debugging (LA-7960X)

Superseded by LA-4532 Package for uTrace for Cortex-M

LA-3743

add to cart

goto to cart

Supports ARMv8-A/R based Cortex-A and Cortex-R 32/64-bit cores

supports 5-pin standard JTAG, cJTAG and SWD,
(0.4 V - 5 V)

Multicore debugging included

includes software for Windows, Linux and MacOSX

requires Power Debug Module

cJTAG and SWD require
Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or PowerDebug PRO

LA-3717
Measuring Adapter JTAG 20

add to cart

goto to cart

Adapter to measure JTAG signals by a logic analyzer
or to disconnect single JTAG lines from the target
LA-3862

add to cart

goto to cart

Converter to connect the ARM Debug Cable or
the CombiProbe to a Mictor connector on the
target. This is needed if you want to debug
without a Preprocessor and if there is only
a Mictor connector on the target.
The trace signals of the CombiProbe are
connected to the lowest four trace signals of
the Mictor (ETMv3 pinout, continuous mode).
But tracing is normally no use case due to
the bandwidth limitations of the CombiProbe.
LA-2746

add to cart

goto to cart

ARM Converter ARM-20 or MIPI-20 to 10-pin ECU14
LA-2720
Converter ARM-20 to MIPS-14

add to cart

goto to cart

Converter to connect an ARM Debug Cable to a MIPS-14 connector
on the target
LA-7843

add to cart

goto to cart

Supports ARMv7-A/R based Cortex-A and Cortex-R 32-bit cores

supports 5-pin standard JTAG, cJTAG and
Serial Wire Debug Port (0.4 V - 5 V)

includes software for Windows, Linux and MacOSX

requires Power Debug Module

cJTAG and SWD require
Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or PowerDebug PRO

LA-3717
Measuring Adapter JTAG 20

add to cart

goto to cart

Adapter to measure JTAG signals by a logic analyzer
or to disconnect single JTAG lines from the target
LA-3881

add to cart

goto to cart

Converter to connect an ARM Debug Cable to a 14-pin
JTAG connector found on Xilinx target boards
LA-3862

add to cart

goto to cart

Converter to connect the ARM Debug Cable or
the CombiProbe to a Mictor connector on the
target. This is needed if you want to debug
without a Preprocessor and if there is only
a Mictor connector on the target.
The trace signals of the CombiProbe are
connected to the lowest four trace signals of
the Mictor (ETMv3 pinout, continuous mode).
But tracing is normally no use case due to
the bandwidth limitations of the CombiProbe.
LA-2746

add to cart

goto to cart

ARM Converter ARM-20 or MIPI-20 to 10-pin ECU14
LA-7844

add to cart

goto to cart

Supports Arm Cortex-M cores

trace support ETM Cortex-M via ETB included

20 pin Arm connector

supports 5-pin standard JTAG, cJTAG and
Serial Wire Debug Port, (0.4 V - 5 V)

includes software for Windows, Linux and MacOSX

requires Power Debug Module

cJTAG and SWD require
Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or PowerDebug PRO

LA-3717
Measuring Adapter JTAG 20

add to cart

goto to cart

Adapter to measure JTAG signals by a logic analyzer
or to disconnect single JTAG lines from the target
LA-3862

add to cart

goto to cart

Converter to connect the ARM Debug Cable or
the CombiProbe to a Mictor connector on the
target. This is needed if you want to debug
without a Preprocessor and if there is only
a Mictor connector on the target.
The trace signals of the CombiProbe are
connected to the lowest four trace signals of
the Mictor (ETMv3 pinout, continuous mode).
But tracing is normally no use case due to
the bandwidth limitations of the CombiProbe.
LA-2746

add to cart

goto to cart

ARM Converter ARM-20 or MIPI-20 to 10-pin ECU14
LA-2748

add to cart

goto to cart

Converter 26-pin Automotive Debug Cable
to ARM20 or TI14
LA-7765

add to cart

goto to cart

supports ARM11 (0.4 V - 5 V)

supports 5-pin standard JTAG, cJTAG and
Serial Wire Debug Port

includes software for Windows, Linux and MacOSX

requires Power Debug Module

cJTAG and SWD require
Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or PowerDebug PRO

LA-3717
Measuring Adapter JTAG 20

add to cart

goto to cart

Adapter to measure JTAG signals by a logic analyzer
or to disconnect single JTAG lines from the target
LA-3862

add to cart

goto to cart

Converter to connect the ARM Debug Cable or
the CombiProbe to a Mictor connector on the
target. This is needed if you want to debug
without a Preprocessor and if there is only
a Mictor connector on the target.
The trace signals of the CombiProbe are
connected to the lowest four trace signals of
the Mictor (ETMv3 pinout, continuous mode).
But tracing is normally no use case due to
the bandwidth limitations of the CombiProbe.
LA-7744
JTAG Debugger for ARM10 (ICD)

add to cart

goto to cart

supports ARM10 (0.4 V - 5 V)

supports 5-pin standard JTAG, cJTAG and
Serial Wire Debug Port

includes software for Windows, Linux and MacOSX

requires Power Debug Module

cJTAG and SWD require
Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or PowerDebug PRO

LA-3717
Measuring Adapter JTAG 20

add to cart

goto to cart

Adapter to measure JTAG signals by a logic analyzer
or to disconnect single JTAG lines from the target
LA-3862

add to cart

goto to cart

Converter to connect the ARM Debug Cable or
the CombiProbe to a Mictor connector on the
target. This is needed if you want to debug
without a Preprocessor and if there is only
a Mictor connector on the target.
The trace signals of the CombiProbe are
connected to the lowest four trace signals of
the Mictor (ETMv3 pinout, continuous mode).
But tracing is normally no use case due to
the bandwidth limitations of the CombiProbe.
LA-7742

add to cart

goto to cart

supports ARM9 (0.4 V - 5 V)

supports 5-pin standard JTAG, cJTAG and
Serial Wire Debug Port

includes software for Windows, Linux and MacOSX

requires Power Debug Module

cJTAG and SWD require
Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or PowerDebug PRO

LA-3722

add to cart

goto to cart

Converter to connect the ARM Debug Cable to a Mictor
connector on the target providing both debug and
trace signals. This is needed if you want to connect
the Debug Cable without a Preprocessor and if there
is only a Mictor on the target. Suitable for MMDSP
and ARC as well.
LA-3717
Measuring Adapter JTAG 20

add to cart

goto to cart

Adapter to measure JTAG signals by a logic analyzer
or to disconnect single JTAG lines from the target
LA-3862

add to cart

goto to cart

Converter to connect the ARM Debug Cable or
the CombiProbe to a Mictor connector on the
target. This is needed if you want to debug
without a Preprocessor and if there is only
a Mictor connector on the target.
The trace signals of the CombiProbe are
connected to the lowest four trace signals of
the Mictor (ETMv3 pinout, continuous mode).
But tracing is normally no use case due to
the bandwidth limitations of the CombiProbe.
LA-7746

add to cart

goto to cart

supports ARM7 (0.4 V - 5 V)

supports 5-pin standard JTAG, cJTAG and
Serial Wire Debug Port

includes software for Windows, Linux and MacOSX

requires Power Debug Module

cJTAG and SWD require
Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or PowerDebug PRO

LA-7748

add to cart

goto to cart

Converter to connect a Debug Cable to a TI-14
connector which is used on many targets with
processors from Texas Instruments
LA-3780

add to cart

goto to cart

Converter to connect a Debug Cable to a TI-14 or
TI-20-Compact connector which is used on many
targets with processors from Texas Instruments.
LA-3770

add to cart

goto to cart

Converter to connect a 20-pin debug cable to 10/20/34 pin
connectors specified by MIPI
LA-7747

add to cart

goto to cart

Converter to connect an ARM Debug Cable V1 (ARM-14)
to ARM-20 or to connect a newer ARM Debug Cable
(ARM-20) to ARM-14 target connector

ARM-14 is an obsolete connector specification,
do not use for new designs
LA-3726

add to cart

goto to cart

Converter to connect two ARM Debug Cable to one
connector on the target.

Old method to handle multicore debugging by using
two debugger hardware modules.
LA-3717
Measuring Adapter JTAG 20

add to cart

goto to cart

Adapter to measure JTAG signals by a logic analyzer
or to disconnect single JTAG lines from the target
LA-3862

add to cart

goto to cart

Converter to connect the ARM Debug Cable or
the CombiProbe to a Mictor connector on the
target. This is needed if you want to debug
without a Preprocessor and if there is only
a Mictor connector on the target.
The trace signals of the CombiProbe are
connected to the lowest four trace signals of
the Mictor (ETMv3 pinout, continuous mode).
But tracing is normally no use case due to
the bandwidth limitations of the CombiProbe.
LA-7739

add to cart

goto to cart

supports JANUS 2

includes software for Windows, Linux and MacOSX

requires Power Debug Module

debug cable with 20 pin connector
LA-3747
JTAG/SPI Debugger for UBI32

add to cart

goto to cart
LA-3864
Converter ARM-20 to UBI32-10

add to cart

goto to cart

Converter 20 pin JTAG ARM to
UBI32-10
LA-7722

add to cart

goto to cart

supports PowerPC MPC505, MPC555, MPC56X
MPC801, MPC821, MPC85x, MPC86x, MPC87x and MPC88x

includes software for Windows, Linux and MacOSX

requires Power Debug Module

(Processor BDM input signals have to be 3.3V
tolerant)
LA-2708

add to cart

goto to cart

supports Qorivva MPC5xxx/SPC5xxx (e200 cores)
and Freescale PX SERIES processors
eTPU, GTM and SPT debugging included

Concurrent debugging of multiple e200 cores on
multicore processors requires a
License for Multicore Debugging (LA-7960X)
(not necessary for lockstep mode)

includes software for Windows, Linux and MacOSX

requires
Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, Power Debug II or
PowerDebug PRO

includes LA-3873 (Conv. AUTO26 to JTAG14 OnCE)

LA-7968X

add to cart

goto to cart

Support for On-Chip and Off-Chip Trace
for Qorivva MPC57XX and SPC57X/SPC58X

please add the serial number of the base debug
cable to your order

LA-2712

add to cart

goto to cart

debug cable with license bundle

includes software for Windows, Linux and MacOSX

requires
Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or PowerDebug PRO

Automotive Debug Cable 26-pin

Consists of
LA-2708 Debugger for MPC5xxx Automotive PRO
LA-7968X Trace License Qorivva MPC57xx and SPC57x/58x
LA-3719A Debugger for RH850 Additional
LA-3734X Onchip Trace Support for RH850
LA-1947 Automotive HALF-SIZE-CABLE 26-10
LA-1948 Automotive HALF-SIZE-CABLE 26-20
LA-1949 Automotive HALF-SIZE-CABLE 26-26

LA-2713

add to cart

goto to cart

debug cable with license bundle

includes software for Windows, Linux and MacOSX

requires
Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or PowerDebug PRO

Automotive Debug Cable 26-pin

Consists of
LA-2708 Debugger for MPC5xxx Automotive PRO
LA-7968X Trace License Qorivva MPC57xx and SPC57x/58x
LA-7756A Debugger for TriCore Standard Additional
LA-3799X Trace License for TriCore ED
LA-1947 Automotive HALF-SIZE-CABLE 26-10
LA-1948 Automotive HALF-SIZE-CABLE 26-20
LA-1949 Automotive HALF-SIZE-CABLE 26-26

LA-3736

supports Qorivva MPC5xxx/SPC5xxx (e200 cores)
and Freescale PX SERIES processors
eTPU, GTM and SPT debugging included

Concurrent debugging of multiple e200 cores on
multicore processors requires a
License for Multicore Debugging (LA-7960X)
(not necessary for lockstep mode)

includes software for Windows, Linux and MacOSX

requires
Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, Power Debug II or
PowerDebug PRO

includes LA-3873 (Conv. AUTO26 to JTAG14 OnCE)

Superseded by LA-2708 Debugger for MPC5xxx Automotive PRO

LA-7753

supports Qorivva MPC5xxx/SPC5xxx (e200 cores)
and Freescale PX SERIES processors
eTPU, GTM and SPT debugging included

includes software for Windows, Linux and MacOSX

requires Power Debug Module

Concurrent debugging of multiple e200 cores on
multicore processors requires a
License for Multicore Debugging (LA-7960X)
(not necessary for lockstep mode)

debug cable with 14 pin connector

Superseded by LA-2708 Debugger for MPC5xxx Automotive PRO

LA-3723

add to cart

goto to cart

Converter 14 Pin JTAG/OnCE connector to Mictor38
on target for Qorivva MPC5xxx and SPC5xxx
LA-3874

add to cart

goto to cart

Converter from Automotive Debug Cable (26-pin)
to Mictor 38pin (NEXUS MPC5XXX pinout)

for
LA-2708 (Debugger for MPC5xxx Automotive PRO)
LA-3736 (JTAG Debugger for MPC5xxx Automotive)
LA-3875

add to cart

goto to cart

Converter from Automotive Debug Cable (26-pin)
to Samtec 50pin (NEXUS MPC5XXX pinout)

for
LA-2708 (Debugger for MPC5xxx Automotive PRO)
LA-3736 (JTAG Debugger for MPC5xxx Automotive)
LA-3873

add to cart

goto to cart

Converter from Automotive Debug Cable (26-pin)
to 14 Pin JTAG/OnCE header on target

for
LA-2708 (Debugger for MPC5xxx Automotive PRO)
LA-3736 (JTAG Debugger for MPC5xxx Automotive)
LA-3876

add to cart

goto to cart

Converter from 14 Pin JTAG/OnCE MPC5XXX to AUTO26/20/10

use with
LA-7753 JTAG Debugger Qorivva MPC5xxx/SPC5xxx (ICD)

to connect to targets designed for
LA-2708 (Debugger for MPC5xxx Automotive PRO)
LA-3736 (JTAG Debugger for MPC5xxx Automotive)
LA-3796

add to cart

goto to cart

supports PowerQuiccIII (MPC85XX) and
QorIQ 32-bit with e500 core
(P10XX, P2010, P2020, BSC9xxx)

includes software for Windows, Linux and MacOSX

requires Power Debug Module

debug cable with 16 pin connector

Concurrent debugging of two or more cores
in multicore chip requires a
License for Multicore Debugging (LA-7960X)

LA-3796X

add to cart

goto to cart

debugger extension for PowerQuiccIII (MPC85XX) and
QorIQ with e500 core

requires a valid software guaranty or a valid
software maintenance key

only suitable for debug cables newer than 07/2008

please add the serial number of the base debug
cable to your order

LA-7967X

add to cart

goto to cart

Support for On-Chip and Off-Chip Trace
for QorIQ PowerPC

please add the serial number of the base debug
cable to your order

LA-3754
JTAG Debugger for PWRficient (ICD)

add to cart

goto to cart

supports PA6T-1682M
supports (1.8V - 5.0V)

Concurrent debugging of both cores in
dual-core chip requires a
License for Multicore Debugging (LA-7960X)

includes software for Windows, Linux and MacOSX

requires Power Debug Module

debug cable with 16 pin connector

LA-7752

add to cart

goto to cart

supports (1.8V - 5.0V) PPC440

includes software for Windows, Linux and MacOSX

requires Power Debug Module

debug cable with 16 pin connector

requires LA-7986 if the target has a
Mictor38 connector

LA-7752A

add to cart

goto to cart

supports PPC440

please add the serial number of the base debug
cable to your order

LA-7752X

add to cart

goto to cart

supports PPC440

requires a valid software guaranty or a valid
software maintenance key

please add the serial number of the base debug
cable to your order

LA-3731

add to cart

goto to cart

Converter from PPC400 16 pins to Xilinx
PPC400/Microblaze 14 pins target adapter
LA-7986

add to cart

goto to cart

Converter MICTOR 38 on target to
16 pin male connector JTAG Debugger PPC4XX
and MICTOR 38 of
LA-7929 Preprocessor for PPC4xx family fast flex or
LA-3900 Preproc. for PPC4XX AUTOFOCUS II Flex

required if no separate JTAG connector is provided
on the target
LA-7723A

add to cart

goto to cart

supports PPC40x

please add the serial number of the base debug
cable to your order

LA-7723X

add to cart

goto to cart

supports PPC40x

requires a valid software guaranty or a valid
software license key

please add the serial number of the base debug
cable to your order

LA-3731

add to cart

goto to cart

Converter from PPC400 16 pins to Xilinx
PPC400/Microblaze 14 pins target adapter
LA-7986

add to cart

goto to cart

Converter MICTOR 38 on target to
16 pin male connector JTAG Debugger PPC4XX
and MICTOR 38 of
LA-7929 Preprocessor for PPC4xx family fast flex or
LA-3900 Preproc. for PPC4XX AUTOFOCUS II Flex

required if no separate JTAG connector is provided
on the target
LA-7761

add to cart

goto to cart

supports MIPS64 5Kc, 20Kc derivatives

includes software for Windows, Linux and MacOSX

requires Power Debug Module

debug cable with 14 pin connector

LA-7761A

add to cart

goto to cart

supports MIPS64 5Kc, 20Kc derivatives

please add the base serial number of your debug
cable to your order

LA-7971X

add to cart

goto to cart

1.) Support for EJTAG onchip trace on MIPS32
please add the base serial number of your debug
cable to your order

2.) Supports 4-Bit IFlow program trace by using
LA-4504 CombiProbe MIPS32-Debugger and 4-Bit IFLOW

LA-7777

add to cart

goto to cart

Converter for MIPS-EJTAG 14 pins to 12 pins
to support Micronas MDE processor
LA-7798

add to cart

goto to cart

Converter for MIPS-EJTAG 14 pins to 24 pins
to support IDT processors

IMPORTANT:
This adpater can also be used for 20 pin
target connections, but a separate wire for
VCC is required. Please ask your local
distributor.
LA-7901

add to cart

goto to cart

Converter for Preprocessor for MIPS
Mictor38 to Samtec 24
to support IDT processor

Target connectors:
FTSH-112-04-L-DV (SMD, small height)
FTSH-112-04-L-D (through-hole, small height)

FW-12-05-L-D-XXX-150
(SMD, "XXX" selectable height)

FW-12-02-L-D-XXX-150
(through-hole, "XXX" selectable height)
LA-7903

add to cart

goto to cart

Converter for Preprocessor for MIPS
Mictor38 to Samtec52
to support Micronas MDEB (Lexra LX4280) processor

Target connector:
FTSH-126-04-L-DV (SMD, small height)
FTSH-126-04-L-D (through-hole, small height)

FW-26-05-L-D-XXX-150
(SMD, "XXX" selectable height)

FW-26-02-L-D-XXX-150
(through-hole, selectable height)
LA-2721

add to cart

goto to cart

Converter to connect a MIPS Debug Cable to an ARM-20 connector
on the target
LA-3845

add to cart

goto to cart

Converter from SAMTEC60 + JTAG14 to MICTOR38 for
MIPS

LA-3776A
JTAG Debugger for Intel x86/x64 Add.

add to cart

goto to cart

Supports Intel® Atom™ cores and
Intel® Core i3,i5,i7
(32-bit and 64-bit)

Multicore debugging included
please add the serial number of the base debug
cable/CombiProbe/QuadProbe to your order

Only suitable for debug cables newer than 08/2008

LA-3825
Conv. Intel® x86/x64 Debugger to Hirose31

add to cart

goto to cart

Converter from 60 pin XDP (Samtec) connector on
JTAG Debugger for Intel x86/x64 (LA-3776) to 31 pin
XDP-SSA (Hirose) connector
(not recommended because of poor signal quality)
LA-3826
Conv. Intel® x86/x64 Debugger to ZIF24 pin

add to cart

goto to cart

Converter from 60 pin XDP (Samtec) connector on
JTAG Debugger for Intel x86/x64 (LA-3776) to 24 pin
XDP-SFF (ZIF) connector
(not recommended because of poor signal quality)
LA-3827
Conv. Intel® x86/x64 Debugger to ZIF26 pin

add to cart

goto to cart

Converter from 60 pin XDP (Samtec) connector on JTAG
Debugger for Intel x86/x64 (LA-3776) to 26 pin XDP-SFF
(ZIF) connector
(not recommended because of poor signal quality)
LA-3791
Conv. Intel x86/x64 Multiple Con. to XDP60

add to cart

goto to cart

Converter from MIPI34 connector on
CombiProbe for Intel x86/x64

+ from XPD60 connector on
JTAG probe for Intel x86/x64

+ from Mictor for STP

to 60 pin XDP (Samtec) connector
LA-3828
Conv. Intel® x86/x64 Debug. to Intel® MIPI34

add to cart

goto to cart

Converter from 60pin XDP (Samtec) connector on
JTAG Debugger for Intel x86/x64 (LA-3776) to
Intel MIPI34 connector
LA-3877
Conv. Intel® x86/x64 Debuger to MIPI34 Galil

add to cart

goto to cart

Converter from 60pin XDP (Samtec) connector on
JTAG Debugger for Intel x86/x64 (LA-3776) to 34pin
MIPI connector Galileo/Quark
LA-3869
Conv. XDP60 to MIPI60 (Intel)

add to cart

goto to cart

Converter from XDP 60 pin
to MIPI 60 pin on target
for ITP 60 pin to MIPI 60 pin (Intel)
LA-3824
Conv. XDP60-3x20pol-XDP60

add to cart

goto to cart

Testadapter from 60 pin XDP to
3 x 20pin 2,54mm post-header to
60 pin XDP for Intel x86/x64 (LA-3776)
LA-3823
Conv. XDP60-1x20pol-MIPI34

add to cart

goto to cart

Testadapter from 34pin MIPI to
1 x 20pin 2,54mm post-header to
60 pin XDP Intel x86/x64 (LA-3776)
LA-3895
Debug Converter for MinnowBoard

add to cart

goto to cart

Converter to connect

LA-3776 JTAG Debugger for Intel® x86/x64 (Intel XDP60)
or
LA-4512/LA-4516 CombiProbe Intel® x86/x64 MIPI60-C

to the MinnowBoard MAX LA-3894
LA-3970X
Trace Lic. for Intel® Processor Trace (COB)

add to cart

goto to cart

Allows to decode Intel Processor Trace recorded to
SDRAM, TRACE32 CombiProbe or
recorded by TRACE32 PowerTrace II+AutoFocus II preprocessor
configuration that does not include LA-3907

please add the serial number of the base debug
cable or CombiProbe to your order

LA-4614

add to cart

goto to cart

Package for QuadProbe Intel x86/x64 Single MIPI60-Q
with Samtec 8" flex extension cable

requires Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or PowerDebug PRO

requires the following A-license:
LA-3776A (JTAG Debugger for Intel x86/x64)

Consists of
LA-4607 QuadProbe Intel x86/x64
LA-4611 Whisker MIPI60-Q Quad/OctoProbe Intel x86/x64
LA-3879 Conv. MIPI60-Q/MIPI60-Cv2 to XDP60
LA-1248 Flex Ext. for SAM 60 pin QTH-QSH series 08.00

LA-4616

add to cart

goto to cart

Package for QuadProbe Intel x86/x64 Single MIPI60-Q
with Samtec 24" extension cable

requires Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or PowerDebug PRO

requires the following A-license:
LA-3776A (JTAG Debugger for Intel x86/x64)

Consists of
LA-4607 QuadProbe Intel x86/x64
LA-4611 Whisker MIPI60-Q Quad/OctoProbe Intel x86/x64
LA-1249 Flex Ext. for SAM 60 pin QTH-QSH series 24.00
LA-3879 Conv. MIPI60-Q/MIPI60-Cv2 to XDP60

LA-4607

add to cart

goto to cart

requires Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or PowerDebug PRO

Intel MIPI60 Converged connector
requires at least one
LA-4611 Whisker Cable MIPI60-Q for QuadProbe x86/x64
possible are up to four
LA-4611 Whisker Cable MIPI60-Q for QuadProbe x86/x64

requires the following A-license:
LA-3776A JTAG Debugger for Intel x86/x64

LA-4611

add to cart

goto to cart

Whisker Cable MIPI60-Q for QuadProbe Intel x86/x64
and OctoProbe Intel x86/x64

5V tolerant inputs; max. output level 3.3V

Requires one of the following extension cables:
LA-1248 Flex Ext. for SAM 60 pin QTH-QSH series 08.00
LA-1249 Flex Ext. for SAM 60 pin QTH-QSH series 24.00
LA-3879

add to cart

goto to cart

Converter from MIPI60-Q or MIPI60-Cv2 pin-out to XDP 60 pin-out
LA-4606
OctoProbe Intel x86/x64

add to cart

goto to cart

requires Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or PowerDebug PRO

Intel MIPI60 Converged connector
requires at least one
LA-4611 Whisker Cable MIPI60-Q for QuadProbe x86/x64
possible are up to eight
LA-4611 Whisker Cable MIPI60-Q for QuadProbe x86/x64

requires the following A-license:
LA-3776A JTAG Debugger for Intel x86/x64
LA-4604
Package OP Intel x86/x64 Single MIPI60-Q

add to cart

goto to cart

Package for OctoProbe Intel x86/x64 Single MIPI60-Q
with Samtec 8" flex extension cable

requires Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or PowerDebug PRO

requires the following A-license:
LA-3776A (JTAG Debugger for Intel x86/x64)

Consists of
LA-4606 OctoProbe Intel x86/x64
LA-4611 Whisker MIPI60-Q Quad/OctoProbe Intel x86/x64
LA-3879 Conv. MIPI60-Q/MIPI60-Cv2 to XDP60
LA-1248 Flex Ext. for SAM 60 pin QTH-QSH series 08.00

LA-4605
Package OP Intel x86/x64 Single MIPI60-Q Long

add to cart

goto to cart

Package for OctoProbe Intel x86/x64 Single MIPI60-Q
with Samtec 24" extension cable

requires Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or PowerDebug PRO

Consists of
LA-4606 OctoProbe Intel x86/x64
LA-4611 Whisker MIPI60-Q Quad/OctoProbe Intel x86/x64
LA-1249 Flex Ext. for SAM 60 pin QTH-QSH series 24.00
LA-3879 Conv. MIPI60-Q/MIPI60-Cv2 to XDP60

LA-4611

add to cart

goto to cart

Whisker Cable MIPI60-Q for QuadProbe Intel x86/x64
and OctoProbe Intel x86/x64

5V tolerant inputs; max. output level 3.3V

Requires one of the following extension cables:
LA-1248 Flex Ext. for SAM 60 pin QTH-QSH series 08.00
LA-1249 Flex Ext. for SAM 60 pin QTH-QSH series 24.00
LA-3879

add to cart

goto to cart

Converter from MIPI60-Q or MIPI60-Cv2 pin-out to XDP 60 pin-out
LA-7750
Debugger for 196EA (ICD)

add to cart

goto to cart

supports 196EA

includes software for Windows, Linux and MacOSX

requires Power Debug Module

not supported by PowerDebug PRO Ethernet
LA-3777

add to cart

goto to cart

supports 78K0R and RL78 cores (16-bit)

includes software for Windows, Linux and MacOSX

requires Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, Power Debug II or
PowerDebug PRO
LA-3865

add to cart

goto to cart

Converter 20 pin JTAG ARM to
78K 16 pin NEC
LA-3866

add to cart

goto to cart

Converter 20 pin JTAG ARM to
RL78 14 pin Renesas
LA-3756

add to cart

goto to cart

supports AndeCore (0.4 V - 5 V)

includes software for Windows, Linux and MacOSX

requires Power Debug Module

debug cable with 20 pin connector

LA-3756A

add to cart

goto to cart

supports AndeStar (0.4 V - 5 V)

Extension applicable to the following debug cables
(purchased separately):
for LA-7746 (JTAG Debugger for ARM7)
for LA-7742 (JTAG Debugger for ARM9)
for LA-7744 (JTAG Debugger for ARM10)
for LA-7765 (JTAG Debugger for ARM11)
for LA-7843 (JTAG Debugger for Cortex-A/-R (ARMv7))
for LA-7844 (JTAG Debugger for Cortex-M)

please add the serial number of the base dongle
to your order

LA-3778

supports APS3 cores (32-bit)

includes software for Windows, Linux and MacOSX

requires PowerDebug Module

debug cable with 60 pin connector
LA-3785

add to cart

goto to cart

supports APS3 cores (32-bit)

includes software for Windows, Linux and MacOSX

requires PowerDebug Module

debug cable with 20 pin connector
LA-2704

add to cart

goto to cart

supports AVR8

includes software for Windows, Linux and MacOSX

LA-2704A

add to cart

goto to cart

supports AVR8

please add the serial number of the base debug
cable to your order

LA-2732

add to cart

goto to cart

supports the SPI Programming Interface of Atmel AVR8 Chips
LA-3779

add to cart

goto to cart

supports AVR32 cores (32-bit)

includes software for Windows, Linux and MacOSX

requires PowerDebug Module

debug cable with 10 pin connector

LA-3779A

add to cart

goto to cart

supports AVR32

please add the serial number of the base debug
cable to your order

LA-7755

add to cart

goto to cart

supports E-GOLD, E-GOLD+, DOLCE, UTAH, M2, X-GOLD101

includes software for Windows, Linux and MacOSX

requires Power Debug Module

debug cable with 16 pin connector

LA-7710

add to cart

goto to cart

supports MC68330..341, 68349, 68360,

includes software for Windows, Linux and MacOSX

requires Power Debug Module
LA-3757

add to cart

goto to cart

supports FREESCALE ColdFire Family

includes software for Windows, Linux and MacOSX

requires Power Debug Module or PowerTrace

debug cable with 26 pin connector

LA-3746

add to cart

goto to cart

supports FREESCALE ColdFire+/V1 Family

includes software for Windows, Linux and MacOSX

requires Power Debug Module or PowerTrace

debug cable with 6 pin connector
LA-2755

add to cart

goto to cart

supports eSi-RISC Core

includes software for Windows, Linux and MacOSX

requires Power Debug Module or PowerTrace

debug cable with 16 pin connector
LA-2755A

add to cart

goto to cart

supports eSi-RISC Core

Multicore debugging included

only suitable for debug cables newer than 07/2008

please add the base serial number of your debug
cable to your order

includes software for Windows, Linux and MacOSX

LA-3745

add to cart

goto to cart

supports CPU H8SX/1664 from Renesas

includes software for Windows, Linux and MacOSX

requires Power Debug Module

debug cable with 14 pin connector
LA-3745X

add to cart

goto to cart

supports CPU H8SX/1664 from Renesas

requires a valid software guaranty or a valid
software maintenance key

please add the serial number of the base debug
cable to your order

LA-7766

add to cart

goto to cart

supports H8S (H8S/2319, 2329, 2339, 2367, 2368,
2377 and 2378) from Renesas

includes software for Windows, Linux and MacOSX

requires Power Debug Module

debug cable with 14 pin connector

LA-7712
BDM Debugger for 68HC16 (ICD)

add to cart

goto to cart

supports MC68HC16 all derivatives

includes software for Windows, Linux and MacOSX

requires Power Debug Module

not supported by PowerDebug PRO Ethernet
LA-7661

add to cart

goto to cart

Adapter for Debug on M32R SDI-3

includes software for Windows, Linux and MacOSX

requires a Power Debug Module

debug cable with 10 pin connector

LA-7662

add to cart

goto to cart

Adapter 10 pin 100 mil to 50 mil
for M32R

only for LA-7661 (Debug Adapter for M32R SDI-3)
LA-7745

add to cart

goto to cart

supports M-CORE derivatives

includes software for Windows, Linux and MacOSX

requires Power Debug Module

debug cable with 14 pin connector
LA-7733

add to cart

goto to cart

supports MCS08

includes software for Windows, Linux and MacOSX

requires Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, Power Debug II
LA-3713

add to cart

goto to cart

supports MSP430 via JTAG or Spy-Bi-Wire

includes software for Windows, Linux and MacOSX

requires Power Debug Module

debug cable with 14 pin connector
LA-3719

add to cart

goto to cart

supports RH850 via JTAG, LPD4, LPD1
ICU-M core support included
supports V850 via NWIRE

includes software for Windows, Linux and MacOSX

requires Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, Power Debug II or
PowerDebug PRO

debug cable with 14 pin connector

LA-2709

add to cart

goto to cart

supports RH850 via JTAG, LPD4
ICU-M core support included
supports V850 via NWIRE

includes software for Windows, Linux and MacOSX

requires
Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, Power Debug II or
PowerDebug PRO

debug cable with 26 pin connector

LA-2712

add to cart

goto to cart

debug cable with license bundle

includes software for Windows, Linux and MacOSX

requires
Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or PowerDebug PRO

Automotive Debug Cable 26-pin

Consists of
LA-2708 Debugger for MPC5xxx Automotive PRO
LA-7968X Trace License Qorivva MPC57xx and SPC57x/58x
LA-3719A Debugger for RH850 Additional
LA-3734X Onchip Trace Support for RH850
LA-1947 Automotive HALF-SIZE-CABLE 26-10
LA-1948 Automotive HALF-SIZE-CABLE 26-20
LA-1949 Automotive HALF-SIZE-CABLE 26-26

LA-2714

add to cart

goto to cart

debug cable with license bundle

includes software for Windows, Linux and MacOSX

requires
Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or PowerDebug PRO

Automotive Debug Cable 26-pin

Consists of
LA-2709 Debugger for RH850/V850 Automotive PRO
LA-3734X Onchip Trace Support for RH850
LA-7756A Debugger for TriCore Standard Additional
LA-3799X Trace License for TriCore ED
LA-1947 Automotive HALF-SIZE-CABLE 26-10
LA-1948 Automotive HALF-SIZE-CABLE 26-20
LA-1949 Automotive HALF-SIZE-CABLE 26-26

LA-3739

supports RH850 via JTAG, LPD4
ICU-M core support included
supports V850 via NWIRE

includes software for Windows, Linux and MacOSX

requires
Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, Power Debug II or
PowerDebug PRO

debug cable with 26 pin connector

Superseded by LA-2709 Debugger for RH850/V850 Automotive PRO

LA-3753

debug cable with license bundle

includes software for Windows, Linux and MacOSX

requires
Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or PowerDebug PRO

Automotive Debug Cable 26-pin

Superseded by LA-2714 Debug-Bundle TriCore/RH850 Automotive PRO

Consists of
LA-3739 Debugger for RH850/V850 Automotive
LA-3734X Onchip Trace Support for RH850
LA-7756A Debugger for TriCore Standard Additional
LA-3799X Trace License for TriCore ED
LA-1947 Automotive HALF-SIZE-CABLE 26-10
LA-1948 Automotive HALF-SIZE-CABLE 26-20
LA-1949 Automotive HALF-SIZE-CABLE 26-26

LA-2700

add to cart

goto to cart

Converter from Automotive Debug Cable (26-pin)
to 14 Pin RH850 connector on target

for
LA-2709 (Debugger for RH850/V850 Automotive PRO)
LA-3739 (Debugger for RH850 Automotive)
LA-2701

add to cart

goto to cart

Converter from 14 pin debug connector for RH850 to AUTO26

use with
LA-3719 (Debugger for RH850)

to connect to targets designed for
LA-2709 (Debugger for RH850/V850 Automotive PRO)
LA-3739 (Debugger for RH850 Automotive)
LA-2702

add to cart

goto to cart

Converter from 14 pin debug connector for RH850 to
20 pin N-Wire for V850

use with
LA-3719 (Debugger for RH850)
LA-2717

add to cart

goto to cart

supports RISC-V

MIPI10 / MIPI20 connector on the target required:
LA-3770 ARM Converter ARM-20 to MIPI-10/20/34

ALTERA-10/RISCV-10 connector on the target required:
LA-3863 Converter ARM-20 to ALTERA-10/RISCV-10

includes software for Windows, Linux and MacOSX

requires Power Debug Module

LA-2717A

add to cart

goto to cart

supports RISC-V

only suitable for debug cables newer than 07/2008

MIPI10 / MIPI20 connector on the target required:
LA-3770 ARM Converter ARM-20 to MIPI-10/20/34

ALTERA-10/RISCV-10 connector on the target required:
LA-3863 Converter ARM-20 to ALTERA-10/RISCV-10


includes software for Windows, Linux and MacOSX

LA-2765

add to cart

goto to cart

Converter from ARM-20 to 12 pin PMOD connectors with the
JTAG pinout from SiFive.

PMOD is an open standard defined by Digilent for peripherals used with
FPGAs or microcontrollers.

The PMOD pinout of this adapter does ONLY work with targets that use
the pinout that was defined by SiFive. So it is not a general/official
RISC-V pinout. In case of FPGA boards, the pinout depends on the used
FPGA image.
LA-3770

add to cart

goto to cart

Converter to connect a 20-pin debug cable to 10/20/34 pin
connectors specified by MIPI
LA-3863

add to cart

goto to cart

Converter from ARM 20-pin connector to
Altera 10-pin (Byteblaster) connector or
RISC-V 10-pin

Target connector pitch can be
2.54mm or 1.27mm (half size).
LA-3786

add to cart

goto to cart

supports RX600, RX610
derivatives from Renesas

includes software for Windows, Linux and MacOSX

requires Power Debug Module

debug cable with 14 pin connector

LA-3789

add to cart

goto to cart

Converter for RX from 14 pin JTAG to
Mictor 38 pin on target (only JTAG)
LA-3792

add to cart

goto to cart

Converter for RX AUD Trace,
JTAG14 and Yamaichi 36-pin to Mictor38
LA-3748

add to cart

goto to cart

supports MCS12Z, MCS12X and MCS12

includes software for Windows, Linux and MacOSX

requires Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, Power Debug II or
PowerDebug PRO
LA-7736

supports MCS12X and MCS12

includes software for Windows, Linux and MacOSX

requires Power Debug Module

Superseded by LA-3748 BDM Debugger for MCS12Z (ICD)
LA-7817

add to cart

goto to cart

supports a lot of SH2, SH3 and SH4
derivatives from Renesas (0.4 - 5V)
for ARM JTAG interface

ASEBRK pin in only supported in conjunction with
LA-7818 Converter JTAG 20 to H-UDI 14,
LA-7822 Converter JTAG 20 to Hirose 36
or LA-7823 Converter JTAG 20 to Mictor 38

includes software for Windows, Linux and MacOSX

requires Power Debug Module

debug cable with 20 pin connector

LA-3710

add to cart

goto to cart

supports ST40 from STMicroelectronics

includes software for Windows, Linux and MacOSX

requires Power Debug Module

debug cable with 20 pin connector
LA-7973X

add to cart

goto to cart

Support for JTAG onchip trace on SH2A

please add the base serial number of your debug
cable to your order

LA-3764

add to cart

goto to cart

Converter for ST20 debug connector
Converts H-UDI14 pins to ST20 20 pins
LA-3765

add to cart

goto to cart

Converter for SH725x from 14 pin JTAG to
Mictor 38 pin on target (only JTAG)
LA-3821

add to cart

goto to cart

converter only for
LA-7817 (JTAG Debugger for SH2/SH3/SH4 20 Pin)
to support the ASEBRK signal
LA-7818

add to cart

goto to cart

Converter for JTAG 20 pins to
H-UDI 14 connector for SH2/3/4 processors
LA-7819

add to cart

goto to cart

Converter for JTAG 14 pins to
JTAG 20 connector for SH2/3/4 processors
LA-7822

add to cart

goto to cart

Converter for JTAG 20 pins to
Hirose 36 connector for SH2/3/4 processors
LA-7823

add to cart

goto to cart

Converter for JTAG 20 pins to
Mictor 38 connector for SH2/3/4 processors
LA-7980

add to cart

goto to cart

Converter for SH-JTAG 14 pins to
SH-JTAG 36 pins on Hirose connector
LA-7826

add to cart

goto to cart

Serial termination for SH4 JTAG-14 to
avoid debug signal disturbance
LA-2719

add to cart

goto to cart

supports STM8

includes software for Windows, Linux and MacOSX

requires Power Debug Module
LA-2731

add to cart

goto to cart

supports STM8 4 pin connector
LA-2707

add to cart

goto to cart

supports TriCore, PCP and GTM debugging included

supports JTAG and DAP

includes software for Windows, Linux and MacOSX

requires Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, Power Debug II or
PowerDebug PRO

Automotive Debug Cable 26-pin

Usage of LA-3912 Preproc. TriCore HSTP HF-Flex
requires LA-3829

LA-2713

add to cart

goto to cart

debug cable with license bundle

includes software for Windows, Linux and MacOSX

requires
Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or PowerDebug PRO

Automotive Debug Cable 26-pin

Consists of
LA-2708 Debugger for MPC5xxx Automotive PRO
LA-7968X Trace License Qorivva MPC57xx and SPC57x/58x
LA-7756A Debugger for TriCore Standard Additional
LA-3799X Trace License for TriCore ED
LA-1947 Automotive HALF-SIZE-CABLE 26-10
LA-1948 Automotive HALF-SIZE-CABLE 26-20
LA-1949 Automotive HALF-SIZE-CABLE 26-26

LA-2714

add to cart

goto to cart

debug cable with license bundle

includes software for Windows, Linux and MacOSX

requires
Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or PowerDebug PRO

Automotive Debug Cable 26-pin

Consists of
LA-2709 Debugger for RH850/V850 Automotive PRO
LA-3734X Onchip Trace Support for RH850
LA-7756A Debugger for TriCore Standard Additional
LA-3799X Trace License for TriCore ED
LA-1947 Automotive HALF-SIZE-CABLE 26-10
LA-1948 Automotive HALF-SIZE-CABLE 26-20
LA-1949 Automotive HALF-SIZE-CABLE 26-26

LA-3799X
Trace License for TriCore ED

add to cart

goto to cart

supports decoding of MCDS-based trace data,
on-chip and off-chip

please add the serial number of the base debug
cable to your order

LA-3753

debug cable with license bundle

includes software for Windows, Linux and MacOSX

requires
Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or PowerDebug PRO

Automotive Debug Cable 26-pin

Superseded by LA-2714 Debug-Bundle TriCore/RH850 Automotive PRO

Consists of
LA-3739 Debugger for RH850/V850 Automotive
LA-3734X Onchip Trace Support for RH850
LA-7756A Debugger for TriCore Standard Additional
LA-3799X Trace License for TriCore ED
LA-1947 Automotive HALF-SIZE-CABLE 26-10
LA-1948 Automotive HALF-SIZE-CABLE 26-20
LA-1949 Automotive HALF-SIZE-CABLE 26-26

LA-3888

add to cart

goto to cart

DAP Converter 26-pin Automotive Debug Cable/16-pin Standard Cable
(TriCore) to CAN Physical Layer

In conjunction with
LA-2707 (Debugger for TriCore Automotive PRO)
LA-3737 (JTAG Debugger for TriCore Automotive)
LA-7756 (JTAG Debugger for TriCore Standard)
LA-3843

add to cart

goto to cart

Converter 26-pin Automotive Debug Cable
to 10-pin JTAG half-size (Automotive, ECU14)
for
LA-2707 (Debugger for TriCore Automotive PRO)
LA-2708 (Debugger for MPC5xxx Automotive PRO)
LA-2709 (Debugger for RH850/V850 Automotive PRO)
LA-2713 (Debug-Bundle MPC5xxx/TriCore Automotive PRO)
LA-2714 (Debug-Bundle TriCore/RH850 Automotive PRO)

LA-3736 (JTAG Debugger for MPC5xxx Automotive)
LA-3737 (JTAG Debugger for TriCore Automotive)
LA-3738 (Debugger-Bundle MPC5xxx/TriCore Automotive)
LA-3739 (Debugger for RH850/V850 Automotive)
LA-3753 (Debugger-Bundle TriCore/RH850 Automotive)

Converter 14-pin OnCE-PPC to
10-pin JTAG half-size (Automotive, ECU14)
for LA-7753 (JTAG Debugger for MPC55xx/MPC56xx)

Converter 16-pin TriCore to
10-pin JTAG half-size (Automotive, ECU14)
also supporting DAP (2-wire)
for LA-7756 (OCDS Debugger for TriCore)
LA-2745

add to cart

goto to cart

JTAG Converter 26-pin Automotive Debug Cable
(PPC/ TriCore/RH850) to 10-pin ECU14
for

LA-2707 (Debugger for TriCore Automotive PRO)
LA-2708 (Debugger for MPC5xxx Automotive PRO)
LA-2709 (Debugger for RH850/V850 Automotive PRO)
LA-2713 (Debug-Bundle MPC5xxx/TriCore Automotive PRO)
LA-2714 (Debug-Bundle TriCore/RH850 Automotive PRO)

LA-3736 (JTAG Debugger for MPC5xxx Automotive)
LA-3737 (JTAG Debugger for TriCore Automotive)
LA-3738 (Debugger-Bundle MPC5xxx/TriCore Automotive)
LA-3739 (Debugger for RH850/V850 Automotive)
LA-3753 (Debugger-Bundle TriCore/RH850 Automotive)
LA-3848

add to cart

goto to cart

Converter 16-pin JTAG (TriCore)
to 26-pin Automotive Debug Cable
also supporting DAP (2-wire)
for LA-7756 (OCDS Debugger for TriCore)
LA-3849

add to cart

goto to cart

Converter 26-pin Automotive Debug Cable
to 16-pin JTAG (TriCore)
also supporting DAP (2-wire)
for
LA-2707 (Debugger for TriCore Automotive PRO)
LA-3737 (JTAG Debugger for TriCore Automotive)
LA-7941

add to cart

goto to cart

Converter 16 Pin OCDS level 1 connector to
Samtec 60 Tricore trace connector on target
LA-3819

add to cart

goto to cart

Converter 16 Pin JTAG to 10 Pin
Half-Size-Connector for BOSCH MEDC17

requires LA-7756 (OCDS Debugger for TriCore)
LA-7835

add to cart

goto to cart

supports NEC V850 with N-Wire

includes software for Windows, Linux and MacOSX

requires Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, Power Debug II or
PowerDebug PRO

debug cable with 20 pin connector

requires LA-7936 if KEL connector is used on
the target

requires LA-7937 if Mictor connector is used on
the target

LA-7936

add to cart

goto to cart

Converter KEL connector to debug cable
LA-7937

add to cart

goto to cart

Converter from 20 pin male connector of

LA-7835 (N-Wire Debugger for V850)
LA-7842 (N-Wire Debugger for NEC VR-Series)

to Mictor38
LA-7939

add to cart

goto to cart

NBD Interface support for V850
allows real-time-memory access to target
memory

Placed between Power Debug Module and Debug Cable

16 Pin/100 mil connection to target

Requires: PowerDebugUSB 2, PowerDebugEthernet or
PowerTrace

LA-3718

add to cart

goto to cart

Converter V850-20 Pin to E1-14 Pin
LA-7842

add to cart

goto to cart

supports NEC VR-Series with N-Wire

includes software for Windows, Linux and MacOSX

requires Power Debug Module

debug cable with 20 pin connector

requires LA-7936 if KEL connector is used on
the target

requires LA-7937 if Mictor connector is used on
the target

LA-7759

add to cart

goto to cart

supports C166S V2, XC16x, XE166, XC2000, X-GOLD102

includes software for Windows, Linux and MacOSX

requires Power Debug Module

supports 16-pin standard JTAG

10-pin DAP interface requires LA-3815
and debug cable with serial number higher
than C0809xxxxxxx

LA-7759A

add to cart

goto to cart

supports C166S V2, XC16x, XE166, XC2000, X-GOLD102

please add the serial number of the base debug
cable or CombiProbe to your order

LA-7975X

add to cart

goto to cart

supports X-GOLD102 (PMB7890) and X-GOLD110 (PMB7900)
MCDS features of C166S-V2 family through JTAG

Supports 4-Bit program trace by using
LA-4506 CombiProbe C166V2-Debugger and 4-Bit Trace
LA-3797X

add to cart

goto to cart

supports SMARTi_LU, XC2xxx, XE16x
Onchip Trace and MCDS features through JTAG/DAP

please provide the serial number for LA-7759
together with the order

LA-3815
Conv. 16 Pin JTAG to DAP for TriCore/XC2000

add to cart

goto to cart

Converter 16 Pin JTAG to 10 Pin
Halfe-Size-Connector DAP Interface
for TriCore / XC2000

requires
LA-7759 (OCDS Debugger for XC2000/C166S V2)
or
LA-7756 (OCDS Debugger for TriCore)
LA-3732

add to cart

goto to cart

supports XC800

includes software for Windows, Linux and MacOSX

requires Power Debug Module

debug cable with 16 pin connector

LA-7831
JTAG Debugger for TMS320C5400 DSP (ICD)

add to cart

goto to cart

supports TMS320C54XX (1.8V - 3.6V)

includes software for Windows, Linux and MacOSX

requires Power Debug Module
Debug cable with 20 pin connector

Requires LA-7748 if 14-pin TI target adapter is
used

LA-7831A
JTAG Debugger License for C5400 DSP Add.

add to cart

goto to cart

supports TMS320C54XX

requires a valid software guarantee or a valid
software maintenance key

please add the serial number of the base debug
cable to your order

LA-7831X
JTAG Debugger Extension for TMSC54X

add to cart

goto to cart

supports C54x

requires a valid software guarantee or a valid
software maintenance key

please add the serial number of the base debug
cable to your order

LA-7830X

add to cart

goto to cart

supports C55x

requires a valid software guarantee or a valid
software maintenance key

please add the serial number of the base debug
cable to your order

LA-7976X

add to cart

goto to cart

Support for Embedded Trace Buffer of C5500 DSP

please add the base serial number of your debug
cable to your order

LA-3728

add to cart

goto to cart

Converter 20 Pin JTAG (ARM and TI)
to 60 Pin CTOOLS connector on target
(electrical same as LA-3729)
LA-3729

add to cart

goto to cart

Converter 20 Pin JTAG swap (ARM and TI)
to 60 Pin CTOOLS connector on target
(electrical same as LA-3728)
LA-7979X

add to cart

goto to cart

Support for Embedded Trace Buffer of C6000

please add the base serial number of your debug
cable to your order

LA-7833

add to cart

goto to cart

supports Blackfin Core

includes software for Windows, Linux and MacOSX

requires Power Debug Module

debug cable with 14 pin connector

LA-7977X

add to cart

goto to cart

Support for Embedded Trace Buffer of
CoreSight CEVA-X

please add the base serial number of your debug
cable to your order

LA-7738

add to cart

goto to cart

supports DSP568xx and DSP5683xx

includes software for Windows, Linux and MacOSX

requires Power Debug Module
Not supported by PowerDebug PRO

debug cable with 14 pin connector
LA-7735

add to cart

goto to cart

supports DSP5630x

includes software for Windows, Linux and MacOSX

requires Power Debug Module

not supported by PowerDebug PRO

debug cable with 14 pin connector

LA-3722

add to cart

goto to cart

Converter to connect the ARM Debug Cable to a Mictor
connector on the target providing both debug and
trace signals. This is needed if you want to connect
the Debug Cable without a Preprocessor and if there
is only a Mictor on the target. Suitable for MMDSP
and ARC as well.
LA-7834

add to cart

goto to cart

supports StarCore DSP

includes software for Windows, Linux and MacOSX

requires Power Debug Module

debug cable with 14 pin connector

requires LA-3724 (Adapter for StarCore Boards
with Ejector) if target has a JTAG connector
with ejector

LA-3724

add to cart

goto to cart

Adapter to connect debug cable of
JTAG Debugger for StarCore (LA-7834)
to targets with JTAG connector that
use an ejector
LA-2751

add to cart

goto to cart

Supports STRED cores

Multicore debugging included

includes software for Windows, Linux and MacOSX

requires Power Debug Module

LA-2751A

add to cart

goto to cart

Supports STRED cores

Multicore debugging included

only suitable for debug cables newer than 07/2008

please add the base serial number of your debug
cable to your order

includes software for Windows, Linux and MacOSX

LA-2752X
Trace License for STRED (Debug Cable)

add to cart

goto to cart
LA-7774X

add to cart

goto to cart

supports Teak, Teaklite and Teaklite-II with
JAM interface

requires a valid software guarantee or a valid
software maintenance key

please add the serial number of the base debug
cable to your order

LA-7789X

add to cart

goto to cart

supports S-GOLD, S-GOLDlite, E-GOLDlite, X-GOLD

requires a valid software guarantee or a valid
software maintenance key

please add the serial number of the base debug
cable to your order

LA-3774X

add to cart

goto to cart

supports TEAKLITE-III

requires a debug cable with serial number
C0808xxxxxxx or higher

requires a valid software guarantee or a valid
software maintenance key

please add the serial number of the base debug
cable to your order

LA-7969X

add to cart

goto to cart

Support for Embedded Trace Buffer of
CoreSight TEAKLITE-III

please add the serial number of the base debug
cable to your order

LA-3844A
JTAG Debugger for TeakLite-4 Add. (ICD)

add to cart

goto to cart
LA-3844X
JTAG Debugger Extension for TEAKLITE-4

add to cart

goto to cart

supports TEAKLITE-4

requires a debug cable with serial number
C0808xxxxxxx or higher

requires a valid software guarantee or a valid
software license key

please add the serial number of the base debug
cable to your order

LA-7832

add to cart

goto to cart

supports ZSP400 Core (LSI)

includes software for Windows, Linux and MacOSX

requires Power Debug Module
LA-3730

add to cart

goto to cart

supports MicroBlaze

includes software for Windows, Linux and MacOSX

requires Power Debug Module or PowerTrace

debug cable with 16 pin connector

LA-3807

add to cart

goto to cart

JTAG Adapter Spartan3
Xilinx MicroBlaze
16 pin to 6 pin
Boards: EVB Spartan3EStarter Kit; EVB S3ADSP1800A
LA-3863

add to cart

goto to cart

Converter from ARM 20-pin connector to
Altera 10-pin (Byteblaster) connector or
RISC-V 10-pin

Target connector pitch can be
2.54mm or 1.27mm (half size).
LA-2715

add to cart

goto to cart

supports NIOS-II

includes software for Windows, Linux and MacOSX

requires Power Debug Module

debug cable with 20 pin connector

LA-3752

supports ARC 700, ARC 600, ARC EM, ARC HS,
ARCtangent-A5 and ARCtangent-A4

includes software for Windows, Linux and MacOSX

requires Power Debug Module

debug cable with 60 pin XDP connector

LA-3914X
Trace License for ARC (Cable)

add to cart

goto to cart

Support for Nexus Onchip Trace (ARC RTT)
(Not required for "Small Onchip Trace" (SmaRT))

please add the base serial number of your debug
cable to your order

LA-3860

add to cart

goto to cart

Converter to connect a ARM Debug Cable
to a 16 pin PowerPC connector (PPC4xx)
LA-3793

add to cart

goto to cart

supports Beyond Cores (0.4 V - 5 V)

includes software for Windows, Linux and MacOSX

requires Power Debug Module

debug cable with 20-pin connector

LA-3890

add to cart

goto to cart

Converter from Beyond (20-pin) to NXP/Jennic (10-pin)

LA-3793 (JTAG Debugger for Beyond)
LA-7848

add to cart

goto to cart

supports M8051EW core

includes software for Windows, Linux and MacOSX

requires Power Debug Module

debug cable with 14 pin connector

LA-7849

add to cart

goto to cart

supports M8051EW core

includes software for Windows, Linux and MacOSX

requires Power Debug Module

debug cable with 16 pin connector (HITEX compatible)
LA-7850

add to cart

goto to cart

supports R8051XC core

includes software for Windows, Linux and MacOSX

requires Power Debug Module

debug cable with 20 pin connector
LA-7850A

add to cart

goto to cart

supports R8051XC core

requires a debug cable with serial number
C0808xxxxxxx or higher

please add the base serial number of your debug
cable to your order

LA-3761

add to cart

goto to cart

XTENSA JTAG Adapter to
XTAV60 Target
14 pin to 50 pin
Boards: XTAV60
LA-3763

add to cart

goto to cart

allows to connect LA-3762 to boards designed for LA-3760
LA-3744A

add to cart

goto to cart

supports APEX

includes software for Windows, Linux and MacOSX

only suitable for debug cables newer than 07/2008

please add the base serial number of your debug
cable to your order

LA-3501
Galvanic Isolation for Debug Cable

add to cart

goto to cart

Galvanic isolation
for ARM debug cable
for automotive debug cable

Components rated to IEC60950-1 (600 V working voltage)
LA-7960X
License for Multicore Debugging

add to cart

goto to cart

Allows the concurrent debugging of
2 or more identical cores

Please add the base serial number of your Debug
Cable respectively the serial number of the CombiProbe/uTrace
to your order

No "License for Multicore Debugging" is needed if the
Debug Cable or the CombiProbe already has 2 debug licenses

LA-3788
Daisy Chainer 4 JTAG 20

Merges up to 4 JTAG interfaces to a daisy-chain

requires that all JTAG interfaces use the same VTREF

includes 4 JTAG Cable 20 Pin (LA-1968)
LA-2900X

add to cart

goto to cart

Allows Processor-in-the-Loop Simulation for MATLAB

Architecture independent license

requires a valid software guarantee or a valid
software maintenance key

please add the base serial number of your debug
cable to your order
LA-2900L

add to cart

goto to cart

Allows Processor-in-the-Loop Simulation for MATLAB

Architecture independent license

for Windows32, Windows64, Linux32, Linux64
and Solaris, other platforms on request

All TRACE32 Front-End instances have to run
on the same host

Floating license via RLM (Reprise License Manager)

Please add the RLM HostID of the license server
to your order (please see our FAQ)
LA-2100

add to cart

goto to cart

Adapter 14 pin 100 mil to 50 mil with cable.
50 mil connector is a 16 pin connector on target.
Pin 15 and 16 are not connected.
LA-2101

add to cart

goto to cart

Adapter 20 pin 100 mil to 50 mil with cable.
Purpose: Use 20-pin Debug Cable with smaller target
connector. In case of ARM Debug Cable better use
MIPI-10 or MIPI-20 for new designs.
LA-2102

add to cart

goto to cart

Adapter 16 pin 100 mil to 50 mil with cable.
LA-2103

add to cart

goto to cart

Adapter 10 pin 100 mil to 50 mil with cable.
LA-2110

add to cart

goto to cart

Replacement part 10 cm
Half Size Adapter (LA-2100)
LA-2111

add to cart

goto to cart

Replacement part 10 cm
Half Size Adapter (LA-2101)
LA-2112

add to cart

goto to cart

Replacement part 10 cm
Half Size Adapter (LA-2102)
LA-2113

add to cart

goto to cart

Replacement part 5 cm
Half Size Adapter (LA-2103)
LA-3580

add to cart

goto to cart

Universal Trace Port Controller,
512 MegaByte Trace Memory
Streaming rate up to 50 MByte/s

requires PowerDebug II Ethernet or PowerDebug PRO
LA-7692

add to cart

goto to cart

Universal Trace Port Controller,
1 Giga Byte Trace Memory

includes logic analyzer with
17 digital channels, 1024 KSamples

requires PowerDebug II Ethernet or PowerDebug PRO

Host requirements:
USB 2.0 or 100/1000 MBit Ethernet interface,
1.0 GigaByte RAM
LA-7693

add to cart

goto to cart

Universal Trace Port Controller,
2 Giga Byte Trace Memory

includes logic analyzer with
17 digital channels, 1024 KSamples

requires PowerDebug II Ethernet or PowerDebug PRO

Host requirements:
USB 2.0 or 100/1000 MBit Ethernet interface,
1.0 GigaByte RAM
LA-7694

add to cart

goto to cart

Universal Trace Port Controller,
4 Giga Byte Trace Memory

includes logic analyzer with
17 digital channels, 1024 KSamples

requires PowerDebug II Ethernet or PowerDebug PRO

Host requirements:
USB 2.0 or 100/1000 MBit Ethernet interface,
1.0 GigaByte RAM
LA-7695

add to cart

goto to cart

Upgrade from PowerTrace II 1 GByte (LA-7692)
to PowerTrace II 2 GByte (LA-7693)

Upgrade has to be performed by Lauterbach
LA-7696

add to cart

goto to cart

Upgrade from PowerTrace II 1 GByte (LA-7692)
to PowerTrace II 4 GByte (LA-7694)

Upgrade has to be performed by Lauterbach
LA-7697

add to cart

goto to cart

Upgrade from PowerTrace II 2 GByte (LA-7693)
to PowerTrace II 4 GByte (LA-7694)

Upgrade has to be performed by Lauterbach
LA-7992

add to cart

goto to cart

Parallel preprocessor for ARM/Cortex
Embedded Trace Macrocell (ETM),
Program Trace Macrocell (PTM)

Connector cable and software,
600 MBaud (300MHz clock speed, DDR)
Variable threshold level and termination voltage,
AUTOFOCUS self calibration technology,
Support all ETM modes, with 2 MICTOR connectors,
Supports 1.2 to 3.3V - else contact support

Requires PowerTrace II, PowerTrace PX
or PowerTrace/Ethernet Version 6 or higher

LA-7992A

add to cart

goto to cart

Support for ARM/Cortex
Embedded Trace Macrocell (ETM),
Program Trace Macrocell (PTM),

if applied to an AUTOFOCUS II preprocessor

please add the serial number of the preprocessor to
your order

AUTOFOCUS II Preprocessors with serial number
C0806xxxxxx and lower have to be send to Lauterbach
Germany for an hardware upgrade

LA-7993

add to cart

goto to cart

Parallel preprocessor for ARM cores
Embedded Trace Macrocell (ETM),
Program Trace Macrocell (PTM)

Connector cable and software,
600 MBaud (300MHz clock speed, DDR)
Variable threshold level and termination voltage,
AUTOFOCUS self calibration technology,
Support all ETM modes, with SAMTEC60 MIPI connector,
Supports 1.2 to 3.3V - else contact support

supports up to 4 trace sources (mix of TPIU and STM)

Requires PowerTrace
(PowerTrace Ethernet Version 6 or higher)

LA-7922

add to cart

goto to cart

Converter from Mictor38-5V to Mictor38-3.3V for ARM-ETM

Trace clock frequency limited to 150MHz
Trace port size limited to 16bit

Power source (5V): target board (pin 12)
LA-3818

add to cart

goto to cart

Converter to connect Preprocessor AUTOFOCUS II Mictor38
to MIPI60 (QSH) connector

ARM/Cortex: Converter to connect Mictor38 TRACE A
and TRACE B (32-bit ETMv3) and an ARM Debug Cable
to a MIPI60 connector on the target

x86/x64: Converter to connect Mictor38 TRACE A to
to a MIPI60 connector on the target
LA-3842

add to cart

goto to cart

Converter to connect an ARM Preprocessor with
MICTOR-38 and a ARM debug cable with JTAG20 to a
34 pin connector specified by MIPI and CoreSight

It allows to use the Preprocessor on the 4 bit wide
trace port of the MIPI-34 connector

It can be re-configured for MIPI-20

LA-3809

add to cart

goto to cart

Converter to connect an ARM Preprocessor with
MICTOR-38 and a ARM debug cable with JTAG20 to a
20 pin connector specified by MIPI and CoreSight

It allows to use the Preprocessor on the 4 bit wide
trace port of the MIPI-20 connector

It can be re-configured for MIPI-34

LA-3816

add to cart

goto to cart

Converter to connect an ARM Preprocessor to a
MIPI-60 on the target. Suitable for up to 16-bit
ETMv3. The converter is prepared to support various
other configurations because all clock and data
signals of the MIPI-60 are connected to the
Preprocessor.
LA-3817

add to cart

goto to cart

Converter to connect a Preprocessor with MIPI-60
connector to a Mictor-38 connector on the target
assuming an ETMv3 pinout up to 16 bit.

LA-3880

add to cart

goto to cart

Converter to connect an ARM ETM MIPI Preprocessor
with MIPI-60 connector and an ARM Debug Cable to
two Mictor-38 connectors (32-bit ETMv3)
on the target
LA-3808

add to cart

goto to cart

Converter to connect an ARM Preprocessor
(up to 32-bit ETMv3) and a CombiProbe
(STM/STP) to a MIPI-60 connector on the target.
This converter is designed for L8540 from
ST Ericsson.
LA-3840

add to cart

goto to cart

Converter to connect an ARM Preprocessor (16-bit PTM)
or a CombiProbe (4-bit STM) to the OMAP4430
PandaBoard
LA-3846

add to cart

goto to cart

Converter to connect an ARM Preprocessor (16-bit PTM)
to the OMAP5432 EVM (successor of the PandaBoard).
LA-3897
Conv. Mic38 to SABRE-AI Board

add to cart

goto to cart

SABRE-AI to TRACE32 ADAPTER BOARD
Convert Mictor38 to SABRE-AI Target Board
LA-7988

add to cart

goto to cart

Serial preprocessor for ARM-ETM with HSSTP

Connector cable and software

Supported maximum speed per lane:
4 lanes @ 5.00Gbps
3 lanes @ 6.25Gbps
2 lanes @ 6.25Gbps
1 lane @ 6.25Gbps

Support ETMv1.x, ETMv3.x, ETMv4,
all versions of CoreSight-ETM and
Marvell's SETM

Requires PowerTrace II

LA-3833

add to cart

goto to cart

Converter from JTAG 20 (ARM pinout) and Samtec 40 pin
to Samtec 40 pin

for LA-7988 Preproc. ARM HSSTP HF-Flex
LA-2788

add to cart

goto to cart

Converter from JTAG ARM20 and
HSSTP to R-Car H3 Starter Kit from Renesas
LA-3882

add to cart

goto to cart

Converter Mictor38 ARM20 MIPI34 UART with SMDswitch
to SD or Micro SD Socket
LA-3883

add to cart

goto to cart

Converter Mictor38 ARM20 MIPI34 UART
to SD or Micro SD Socket
LA-3520A

add to cart

goto to cart

Supports off-chip ETM/PTM trace port for
ARM/Cortex

if applied to Power Trace Serial

please add the serial number of the Power Trace Serial to
your order

LA-3521
Accessories for PTSerial for ARM-ETM 1-6Lanes

add to cart

goto to cart
LA-2770
ARM Conv. ARM-20 to MIPI-34 PowerTrace Serial

add to cart

goto to cart

converter to connect a 20pin Debug Cable to
34 pin DEBUG connector on PowerTrace Serial,
MIPI-34 connector does not have key pin
LA-2788

add to cart

goto to cart

Converter from JTAG ARM20 and
HSSTP to R-Car H3 Starter Kit from Renesas
LA-3522
Accessories for PTSerial for ARM-ETM 7-8Lanes

add to cart

goto to cart
LA-3550X
License for PCI Express

add to cart

goto to cart

enable tracing via PCI Express

Architecture independent license

please add the serial number of your PowerTrace Serial to your order

LA-3525
PTSERIAL-PCIe x8 Slot-Card-Converter

add to cart

goto to cart

Active slot card adapter for up to 8-lanes PCIe
Converts standard PCIe slot card format to 80pin ERF8
for PowerTrace Serial

requires
LA-1239 Flex Ext. for SAMTEC 80 pin ERM8-ERM8 series

Pinout conform to PCI-Express x8 Connector Pin-Out
LA-3524
PTSERIAL-PCIe x4 Slot-Card-Converter

add to cart

goto to cart

Active slot card adapter for up to 4-lanes PCIe
Converts standard PCIe slot card format to 80pin ERF8
for PowerTrace Serial

requires
LA-1239 Flex Ext. for SAMTEC 80 pin ERM8-ERM8 series

Pinout conform to PCI-Express x4 Connector Pin-Out
LA-3526
PTSERIAL-MiniPCIe x1 Slot-Card-Converter

add to cart

goto to cart

Passive slot card adapter for 1lane
Converts standard Mini-PCIe slot card format to 80pin ERF8
for PowerTrace Serial

requires
LA-1239 Flex Ext. for SAMTEC 80 pin ERM8-ERM8 series

Pinout conform to PCI-Express x1 Connector Pin-Out
LA-3907

add to cart

goto to cart

Preprocessor for Intel® Processor Trace

600 MBaud (300MHz clock speed, DDR)
Variable threshold level and termination voltage,
AUTOFOCUS self calibration technology,
Supports 1.2 to 3.3V - otherwise contact support

Requires PowerTrace II

LA-3907A

add to cart

goto to cart

Allows to decode Intel Processor Trace recorded to
SDRAM or PowerTrace II

please add the serial number of the preprocessor to
your order

AUTOFOCUS II Preprocessors with serial number
C0806xxxxxx and lower have to be send to Lauterbach
Germany for an hardware upgrade

LA-3870

add to cart

goto to cart

Connector for Intel MIPI 60 on target to
- CombiProbe Intel x86/x64 MIPI60-C
- Prepro. for Intel® PT AUTOFOCUS MIPI60-P
LA-3892

add to cart

goto to cart

Connector for Intel MIPI60 Converged on target to
- Whisker MIPI60-Q for Quad-Probe x86/x64
- Prepro. for Intel® PT AUTOFOCUS MIPI60-P

Connector for Intel MIPI60 Converged on target to
- Whisker MIPI60-Cv2 for CombiProbe
- Prepro. for Intel® PT AUTOFOCUS MIPI60-P
LA-7929

add to cart

goto to cart

Program flow trace for PPC4xx
720 MHz clock speed, (180 MHz trace clock)
0.9-3.3V, connector cable and software

requires LA-7983 if the target has a
20 pin male connector

LA-7983

add to cart

goto to cart

Converter for preprocessor for PPC4xx MICTOR 38
(LA-7929) to 20 pin male connector (target)
LA-3910
Preproc. PPC4xx HSTP HF-Flex

add to cart

goto to cart

Preprocessor for PPC4xx high speed trace port
(Aurora based)

up to 4 lanes,
up to 6.5 Gbit/s per lane

Requires PowerTrace II

Converters for Samtec22/46/70 have to be
ordered separately

LA-3838
Conv. Samtec40 HSSTP to SATA

add to cart

goto to cart

Converter from Samtec 40 pin
to SATA 7pin
for LA-3910 Preproc. PPC4xx HSTP HF-Flex
for LA-7987 Preproc. QorIQ PowerPC HSTP HF-Flex


1 flex extension SATA cable 500 mm included

LA-7880
Preprocessor for C166 family

add to cart

goto to cart

Preprocessor for C161 .. C167
adaption to connector for evaluation boards

Does not support Egold+V3!

only with PowerTrace Ethernet 256MB/512MB
or PowerTrace PX
LA-7857
Preprocessor for complete EGOLD family

add to cart

goto to cart

Preprocessor for EGOLD, EGOLD+, EGOLD+V3 and
EGOLDlite,

adaption to ICECON2,

Up to 56 MHz,
extended trace features: 4 x 1MB Trigger RAM
plus trigger features,

only with PowerTrace Ethernet 256MB/512MB
or PowerTrace PX

requires LA-7858 if 80 pin AMP connector is
used on the target

LA-7851
Converter from AMP MODU SYSTEM50 to Mictor fo

add to cart

goto to cart

Converter from the 80 pin AMP MODU SYSTEM50
connectors on

Preprocessor for C16x and XC16x family (LA-7880),
EGOLD+ family (LA-7893) or EGOLD family (LA-7881)

to 2 x 38 pin Mictor connectors
LA-7858
Converter from 2 Mictor to AMP MODU SYSTEM50

add to cart

goto to cart

Converter from the 2 x 38 pin mictor connectors on
Preprocessor for complete EGOLD family (LA-7857) to
80 pin AMP connector

+ 80pol. Cable
LA-3908

add to cart

goto to cart

Preprocessor for Beyond BA2x cores

Instruction trace only

600 MBaud (300MHz clock speed, DDR)
Variable threshold level and termination voltage,
AUTOFOCUS self calibration technology,
Supports 1.8 to 3.3V - otherwise contact support

Requires PowerTrace
(PowerTrace Ethernet Version 6 or higher)

May require
LA-3804 Converter Mictor 38 to XILINX XGI
LA-3530

add to cart

goto to cart

Serial Trace Port Controller with 4 Giga Byte Trace Memory
for CEVA-X ETM

requires PowerDebug II Ethernet or PowerDebug PRO

Host requirements:
USB 3.0 or 1000 MBit Ethernet interface,
4.0 GigaByte RAM

LA-3530A

add to cart

goto to cart

Supports off-chip trace port for
CoreSight CEVA-X

if applied to Power Trace Serial

please add the serial number of the Power Trace Serial to
your order

LA-3550X
License for PCI Express

add to cart

goto to cart

enable tracing via PCI Express

Architecture independent license

please add the serial number of your PowerTrace Serial to your order

LA-3525
PTSERIAL-PCIe x8 Slot-Card-Converter

add to cart

goto to cart

Active slot card adapter for up to 8-lanes PCIe
Converts standard PCIe slot card format to 80pin ERF8
for PowerTrace Serial

requires
LA-1239 Flex Ext. for SAMTEC 80 pin ERM8-ERM8 series

Pinout conform to PCI-Express x8 Connector Pin-Out
LA-3759

add to cart

goto to cart

Preprocessor for ColdFire
adaption to standard FREESCALE connector

requires LA-3757 (BDM Debugger for ColdFire HS)
LA-7660
Debug/Trace Adapter for M32R SDI-3

add to cart

goto to cart

Adapter for Debug and Trace on M32R SDI-3

includes software for Windows, Linux and MacOSX

only with PowerTrace Ethernet 256MB/512MB
or PowerTrace PX
LA-3901
Preproc. for MICROBLAZE AUTOFOCUS II Flex

add to cart

goto to cart

Preprocessor for Real-Time Trace of MICROBLAZE

Requires Xilinx Vivado 2018.3 or later or Vivado 2018.2
with special patch from Xilinx (see
https://www.xilinx.com/support/answers/71422.html#).

250 MHz clock speed
Variable threshold level and termination voltage,
AUTOFOCUS self calibration technology,
Supports 1.2 to 3.3V - else contact support

Requires PowerTrace Version 6 or higher
or PowerTrace II

LA-3901A
Trace License for MicroBlaze AUTOFOCUS II

add to cart

goto to cart

Supports off-chip trace port for MicroBlaze if
applied to an AUTOFOCUS II preprocessor

Requires Xilinx Vivado 2018.3 or later or Vivado 2018.2
with special patch from Xilinx (see
https://www.xilinx.com/support/answers/71422.html#).

please add the serial number of the preprocessor to
your order

AUTOFOCUS II Preprocessors with serial number
C0806xxxxxx and lower have to be send to Lauterbach
Germany for an hardware upgrade

LA-3804

add to cart

goto to cart

Converter Mictor connector to GPIO header
of XILINX ML403/ML501 for
Preprocessor for MicroBlaze (LA-3803)
Preprocessor for Beyond AUTOFOCUS II (LA-3908)
LA-3805
Converter Mictor 38 to S3EStarter/MicroBlaze

add to cart

goto to cart

Converter Mictor connector to FX2 header
of XILINX Spartan3EStarter for
Preprocessor for MicroBlaze (LA-3803)
LA-3806
Converter Mictor 38 to S3ADSPStarter/MicroBla

add to cart

goto to cart

Converter Mictor connector to trace header
of XILINX Spartan3ADSP1800Starter for
Preprocessor for MicroBlaze (LA-3803)
LA-3906

add to cart

goto to cart

Preprocessor for Real-Time Trace of MIPS32

EJTAG 2.6 derivatives or higher

600 MBaud (300MHz clock speed, DDR)
Variable threshold level and termination voltage,
AUTOFOCUS self calibration technology,
Supports 1.2 to 3.3V - otherwise contact support

Requires PowerTrace
(PowerTrace Ethernet Version 6 or higher)

LA-7908

add to cart

goto to cart

Converter for Preprocessor for MIPS
Mictor38 to Samtec52
to support Micronas MDED (Lexra LX4280) processor

Target connector:
FTSH-126-04-L-DV (SMD, small height)
FTSH-126-04-L-D (through-hole, small height)

FW-26-05-L-D-XXX-150
(SMD, "XXX" selectable height)

FW-26-02-L-D-XXX-150
(through-hole, selectable height)
LA-7909

add to cart

goto to cart

Converter for Preprocessor for MIPS64
Mictor38 to Samtec40
to support TOSHIBA RBTX49xx EVBs
LA-3893

add to cart

goto to cart

Converter to connect a Debug Cable to 10/20/34 pin
connectors specified by MIPI.
LA-7856
Preprocessor for MPC500/800 Family Data V2

add to cart

goto to cart

Trace Preprocessor with data for
MPC505, MPC555, MPC56X, MPC821, MPC860
with soldered edge connection
connector cable and software
max bus frequency 66MHz

Requires PowerTrace Version 6 or higher
to support more than 40 MHz
LA-3801

add to cart

goto to cart

Preprocessor for NIOS-II,
150 MHz DDR clock speed,
with MICTOR38 connector

requires PowerTrace
LA-3917A

add to cart

goto to cart

Supports off-chip trace port for Nios II if
applied to an AUTOFOCUS II preprocessor

please add the serial number of the preprocessor to
your order

AUTOFOCUS II Preprocessors with serial number
C0806xxxxxx and lower have to be send to Lauterbach
Germany for an hardware upgrade

LA-7987

add to cart

goto to cart

Preprocessor for QorIQ PowerPC high speed trace port
(Aurora based)

Connector cable and software

up to 4 lanes,
up to 6.5 Gbit/s per lane

Requires PowerTrace II

converters for Samtec22 or Samtec46 have to be
ordered separately if required

LA-3830

add to cart

goto to cart

Converter from JTAG 16 (PPC-COP pinout of LA-3794/LA-3795)
and Samtec 40 pin to Power.org 70 pin

for LA-7987 Preproc. QorIQ PowerPC HSTP HF-Flex

LA-3831

add to cart

goto to cart

Converter from JTAG 16 (PPC-COP pinout of LA-3794/LA-3795)
and Samtec 40 pin to Power.org 46 pin

for LA-7987 Preproc. QorIQ PowerPC HSTP HF-Flex

LA-3832

add to cart

goto to cart

Converter from JTAG 16 (PPC-COP pinout of LA-3794/LA-3795)
and Samtec 40 pin to Power.org 22 pin

for LA-7987 Preproc. QorIQ PowerPC HSTP HF-Flex

LA-3570

add to cart

goto to cart

Serial Trace Port Controller with 4 Giga Byte Trace Memory
for QorIQ PowerPC

converters for Samtec22 or Samtec46 have to be
ordered separately if required

requires PowerDebug II Ethernet or PowerDebug PRO

Host requirements:
USB 3.0 or 1000 MBit Ethernet interface,
4.0 GigaByte RAM

LA-3570A

add to cart

goto to cart

Supports Aurora trace port for
QorIQ PowerPC

if applied to Power Trace Serial

please add the serial number of the Power Trace Serial to
your order

LA-3830

add to cart

goto to cart

Converter from JTAG 16 (PPC-COP pinout of LA-3794/LA-3795)
and Samtec 40 pin to Power.org 70 pin

for LA-7987 Preproc. QorIQ PowerPC HSTP HF-Flex

LA-3831

add to cart

goto to cart

Converter from JTAG 16 (PPC-COP pinout of LA-3794/LA-3795)
and Samtec 40 pin to Power.org 46 pin

for LA-7987 Preproc. QorIQ PowerPC HSTP HF-Flex

LA-3832

add to cart

goto to cart

Converter from JTAG 16 (PPC-COP pinout of LA-3794/LA-3795)
and Samtec 40 pin to Power.org 22 pin

for LA-7987 Preproc. QorIQ PowerPC HSTP HF-Flex

LA-3571

add to cart

goto to cart

Consists of
LA-3550X License for PCI Express
LA-1239 Flex Ext. for SAMTEC 80 pin ERM8-ERM8 series
LA-3526 PTSERIAL-MiniPCIe x1 Slot-Card-Converter
LA-3572

add to cart

goto to cart

Consists of
LA-3550X License for PCI Express
LA-1239 Flex Ext. for SAMTEC 80 pin ERM8-ERM8 series
LA-3524 PTSERIAL-PCIe x4 Slot-Card-Converter
LA-3550X
License for PCI Express

add to cart

goto to cart

enable tracing via PCI Express

Architecture independent license

please add the serial number of your PowerTrace Serial to your order

LA-1239

add to cart

goto to cart

500 mm flex extension for PowerTrace Serial
80 pin SAMTEC ERM8-ERM8 connector
LA-3524
PTSERIAL-PCIe x4 Slot-Card-Converter

add to cart

goto to cart

Active slot card adapter for up to 4-lanes PCIe
Converts standard PCIe slot card format to 80pin ERF8
for PowerTrace Serial

requires
LA-1239 Flex Ext. for SAMTEC 80 pin ERM8-ERM8 series

Pinout conform to PCI-Express x4 Connector Pin-Out
LA-3526
PTSERIAL-MiniPCIe x1 Slot-Card-Converter

add to cart

goto to cart

Passive slot card adapter for 1lane
Converts standard Mini-PCIe slot card format to 80pin ERF8
for PowerTrace Serial

requires
LA-1239 Flex Ext. for SAMTEC 80 pin ERM8-ERM8 series

Pinout conform to PCI-Express x1 Connector Pin-Out
LA-3905

add to cart

goto to cart

Preprocessor for RAM Trace Port on TI chips

500 MHz clock speed
Variable threshold level and termination voltage,
AUTOFOCUS self calibration technology,
Supports 1.2 to 3.3V - else contact support

Requires PowerTrace
(PowerTrace Ethernet Version 6 or higher)

May require
LA-3835 Conv. Mictor38/RTP to Mictor38/ETM+JTAG20
LA-3905A

add to cart

goto to cart

Supports off-chip RAM trace port for of TI chips if
applied to an AUTOFOCUS II preprocessor

please add the serial number of the preprocessor to
your order

AUTOFOCUS II Preprocessors with serial number
C0806xxxxxx and lower have to be send to Lauterbach
Germany for an hardware upgrade

May require
LA-3835 Conv. Mictor38/RTP to Mictor38/ETM+JTAG20

LA-3835

add to cart

goto to cart

Converter from Mictor38 of RTP port of TI chips to
Mictor38 of the ETM trace port plus JTAG 20 pin
LA-3800

add to cart

goto to cart

Preprocessor for ST40 with AUD,
200 MHz clock speed
with 36-pin Yamaichi connector

Requires LA-7985 for 14 pin AUD connector

LA-7934

add to cart

goto to cart

Preprocessor for ST40 8 Bit data AUD,
connector cable and software,
100 MHz clock speed, 4 x trace depth
LA-3766

add to cart

goto to cart

Converter for SH4 AUD Trace 36 pins of Yamaichi
to JTAG and AUD pins of Mictor
LA-3767

add to cart

goto to cart

Converter 14 pin and 36 pins of Yamaichi to JTAG
and AUD pins of ERNI (inclusive adapter cables)

For use with ETAS calibration tool
LA-3820

add to cart

goto to cart

Converter for Autofocus Trace to
Hirose 36 connector for SHx processors
LA-7981

add to cart

goto to cart

Converter for SH4 AUD Trace 36 pins of
Yamaichi to SH4 AUD 36 pins on Hirose
LA-7985

add to cart

goto to cart

Converter for ST40 AUD Trace
Converts Yamaichi 36 pins to AUD ST40 14 pins
LA-3822

add to cart

goto to cart

110 mm flex extension for Mictor 38-pin connector

Required for SHx to enable the CPU debug mode.
The cable forces target signal MPMD (Mictor pin-3)
to GND
LA-7999
Preproc. for STARCORE AUTOFOCUS II Flex

add to cart

goto to cart

Preprocessor for Real-Time Trace of STARCORE
Connector cable and software,
SDR 180 MHz clock speed, DDR support,
8,16,32 Bit Trace Port width,
Variable threshold level and termination voltage,
AUTOFOCUS self calibration technology,
Supports 1.2 to 3.3V - else contact support

Requires PowerTrace Version 6 or higher

LA-7999A
Trace License for StarCore AUTOFOCUS II

add to cart

goto to cart

Supports off-chip trace port for StarCore if
applied to an AUTOFOCUS II preprocessor

please add the serial number of the preprocessor to
your order

AUTOFOCUS II Preprocessors with serial number
C0806xxxxxx and lower have to be send to Lauterbach
Germany for an hardware upgrade

LA-2752X
Trace License for STRED (Debug Cable)

add to cart

goto to cart
LA-3920
Preproc. for STRED AUTOFOCUS II

add to cart

goto to cart

Preprocessor for Real-Time Trace of STRED

330 MHz trace clock
Variable threshold level and termination voltage,
AUTOFOCUS self calibration technology,
Supports 1.2 to 3.3V - else contact support

Requires PowerTrace Version 6 or higher
or PowerTrace II
LA-3920A
Trace License for STRED AUTOFOCUS II

add to cart

goto to cart

Supported for STRED Trace

if applied to an AUTOFOCUS II preprocessor

please add the serial number of the preprocessor to
your order

AUTOFOCUS II Preprocessors with serial number
C0806xxxxxx and lower have to be send to Lauterbach
Germany for an hardware upgrade

LA-7995
Preproc. for TMS320C5500 AUTOFOCUS II Flex

add to cart

goto to cart

Preprocessor for Real-Time Trace of C5500
Connector cable and software,
500 MHz clock speed, 4 x Trace-Depth,
Variable threshold level and termination voltage,
AUTOFOCUS self calibration technology,
Supports 1.2 to 3.3V - else contact support

Requires PowerTrace Version 6 or higher

LA-7995A
Trace License for TMS320C5500 AUTOFOCUS II

add to cart

goto to cart

Supports off-chip trace port for TMS320C55x if
applied to an AUTOFOCUS II preprocessor

please add the serial number of the preprocessor to
your order

AUTOFOCUS II Preprocessors with serial number
C0806xxxxxx and lower have to be send to Lauterbach
Germany for an hardware upgrade

LA-3903
Preproc. for C6000 DSP AUTOFOCUS II Flex

add to cart

goto to cart
LA-3903A
Trace License for C6000 in AUTOFOCUS II

add to cart

goto to cart
LA-3916
Preproc. for C6000 AUTOFOCUS II MIPI60

add to cart

goto to cart

Preprocessor for Real-Time Trace of C64x+

330 MHz trace clock
Variable threshold level and termination voltage,
AUTOFOCUS self calibration technology,
Supports 1.2 to 3.3V - else contact support

Requires PowerTrace Version 6 or higher
or PowerTrace II

LA-3916A
Trace License for C6000 AUTOFOCUS MIPI

add to cart

goto to cart

Supported for Real-Time Trace of C64x+

if applied to an AUTOFOCUS MIPI preprocessors

please add the serial number of the preprocessor to
your order

LA-3727
Conv. Mictor38/JTAG20 to 60 Pin CTOOLS

add to cart

goto to cart

Converter Mictor38/20 Pin JTAG (ARM and TI)
to 60 Pin CTOOLS connector on target
LA-3887
Conv. MIPI60/JTAG20 to 60 Pin CTOOLS

add to cart

goto to cart

Converter MIPI60/20 Pin JTAG (ARM and TI)
to 60 Pin CTOOLS connector on target
LA-7928

add to cart

goto to cart

Program flow trace for TriCore OCDS Level2
connector (Samtec60), cable and software
180 MHz clock speed, 1.8 - 3.3 V
4 x RISC-Trace-Depth
converter LA-7927 required for AMP40 connection

LA-7919

add to cart

goto to cart

Converter for TriCore Level2
from AMP 40 pin (preprocessor)
to SAMTEC 60 pin (target)
LA-7927

add to cart

goto to cart

Converter for TriCore Level2
from SAMTEC 60 pin (preprocessor)
to AMP 40 pin (target)
LA-3912

add to cart

goto to cart

Preprocessor for TriCore Aurora Giga-Bit Trace
(Aurora high-speed trace)

POWER TRACE II: full support
Supported speeds per lane:
4 lanes @ 4.25Gbps
3 lanes @ 6.0Gbps
2 lanes @ 6.25Gbps
1 lane @ 6.25Gbps


POWER TRACE ETHERNET or POWER TRACE PX limited support
Supported speeds per lane:
4 lanes @ 1.25 GBPS
2 lanes @ 2.5 GBPS
- POWER TRACE ETHERNET module must have serial number
E04xxxxxxxx or higher

LA-3912A

add to cart

goto to cart

Supports decoding of MCDS-based trace data,
on-chip and off-chip

please add the serial number of the preprocessor to
your order

LA-3829

add to cart

goto to cart

Converter from JTAG 16 (TriCore pinout of LA-7756)
and Samtec 40 pin -> ERF8 22 pin (Samtec 22 pin)
Includes Samtec 22-pin flex extension

Converter from AUTO26
(TriCore pinout of LA-3737)
and Samtec 40 pin -> ERF8 22 pin (Samtec 22 pin)

for LA-3912 Preproc. TriCore AGBT HF-Flex
and if no separate JTAG/AUTO connector is available
on the target for
LA-2707 (Debugger for TriCore Automotive PRO)
LA-3737 (JTAG Debugger for TriCore Automotive)
LA-7756 (OCDS Debugger for TriCore)
LA-3555

add to cart

goto to cart

Serial Trace Port Controller with 4 Giga Byte Trace Memory
for TriCore AGBT

requires PowerDebug II Ethernet or PowerDebug PRO

Host requirements:
USB 3.0 or 1000 MBit Ethernet interface,
4.0 GigaByte RAM

LA-3555A

add to cart

goto to cart

Supports AGBT trace port for
Tricore

if applied to Power Trace Serial

please add the serial number of the Power Trace Serial to
your order

LA-3556
AGBT Trace Adapter for PowerTrace Serial

add to cart

goto to cart

Adapter for PowerTrace Serial to support Tricore-AGBT trace ports
up to 4lanes,

requires LA-3555
LA-1234

add to cart

goto to cart

290 mm flex extension for
22 pin SAMTEC ERM-ERF connector
partial differential pairs!
LA-3885

add to cart

goto to cart

Converter from Mictor76 to Mictor38 for
LA-3909 (Preprocessor for RH850/V850 Flex Cable)
LA-3918

add to cart

goto to cart

Preprocessor for RH850 parallel Nexus trace interface

Variable threshold level and termination voltage,
AUTOFOCUS self calibration technology,

Voltage range: 1.2 to 3.3V
Trace port: 2..16 MDO (data), 1..2 MESO (control)
Bandwidth: 600 MBaud (300MHz clock speed, DDR)
Connector: 38 pin mictor connector

requires PowerTrace II
LA-3918A

add to cart

goto to cart

Supports RH850 parallel Nexus tracing

please add the serial number of the preprocessor to
your order

AUTOFOCUS II Preprocessors with serial number
C0806xxxxxx and lower have to be send to Lauterbach
Germany for an hardware upgrade
LA-3909

Preprocessor for RH850 and V850 with
parallel Nexus trace interface

Voltage range:
1..5 V
TRACE port:
2..16 MDO (data) lines
1..2 MSEO (control) lines
Data Bandwidth:
up to 200 MBit/s
Connector:
76 pin mictor connector

requires PowerTrace II

Superseded by LA-3918 Preprocessor for RH850 AutoFocus II
LA-3909A

Supports RH850 and V850 tracing

please add the serial number of the preprocessor to
your order
LA-3943

add to cart

goto to cart

Preprocessor for RH850 with
serial Nexus trace interface

including Samtec 40-pin flex extension cable

requires PowerTrace II

Supported speeds per lane:
4 lanes at 4.25Gbps
3 lanes at 6.0Gbps
2 lanes at 6.25Gbps
1 lane at 6.25Gbps

LA-3560 PowerTrace Serial 4 GigaByte RH850
Supports 8 lanes at 12.5Gbps

Superseded by LA-3560 PowerTrace Serial 4 GigaByte RH850

LA-3943A

add to cart

goto to cart

Supports RH850 Aurora NEXUS
(high-speed trace port)

requires serial preprocessor hardware newer than 08/12
(serial number >= C12080164145)

please add the serial number of the serial preprocessor to
your order

LA-3896

add to cart

goto to cart

Converter to connect a RH850 HSTP Aurora Preprocessor to the
Renesas Evalboard: RH850-CCC-404PIN-PB-T1-V1
LA-2771

add to cart

goto to cart

Converter JTAG-RH850 of
LA-3719 (Debugger RH850 14pin)

and from AUTO26 of
LA-2709 (Debugger for RH850/V850 Automotive PRO)
LA-3739 (Debugger RH850 Automotive)

and Samtec 40 pin of
LA-3943 (Preproc. RH850 HSTP HF-Flex)

to Samtec ERF 34-pin RH850 pinout

Includes Samtec 34-pin flex extension
LA-3560

add to cart

goto to cart

Serial Trace Port Controller with 4 Giga Byte Trace Memory
for RH850

requires PowerDebug II Ethernet or PowerDebug PRO

Host requirements:
USB 3.0 or 1000 MBit Ethernet interface,
4.0 GigaByte RAM

Supported speeds per lane:
8 lanes @ 12.5Gbps

LA-3560A

add to cart

goto to cart

Supports Aurora trace port for
RH850

if applied to Power Trace Serial

please add the serial number of the Power Trace Serial to
your order

LA-3561
RH850-34pin Debug&Trace Adapter for PT Serial

add to cart

goto to cart

Adapter for PowerTrace Serial to support RH850 trace ports
up to 4lanes,
34pin target connector

requires LA-3560
LA-1233

add to cart

goto to cart

290 mm flex extension for
34 pin SAMTEC ERM-ERF connector
partial differential pairs!
LA-3562
RH850-40pin Debug&Trace Adapter for PT Serial

add to cart

goto to cart

Adapter for PowerTrace Serial to support RH850 trace ports
up to 4lanes,
40pin target connector

requires LA-3560
LA-1232

add to cart

goto to cart

180 mm flex extension for
40 pin SAMTEC ERM-ERF connector
incl. CCS-female-female adaption
e.g. Preproc. for ARM-ETM/HSSTP HF-Flex
LA-7988
LA-7942
Preprocessor for VR-Flex

add to cart

goto to cart

Preprocessor for VR with TRCU,
200 MHz clock speed, normal trace depth,
support 4 and 16 bit bus width

Mictor connector to target

requires LA-7938 if KEL connector is used on
the target

LA-7938

add to cart

goto to cart

Converter KEL connector to preprocessor
LA-3913
Preproc. for ARC/AUTOFOCUS II 600 Flex

add to cart

goto to cart

Preprocessor for ARC Real-Time Trace (ARC RTT)

Connector cable and software,
600 MHz clock speed,
8,16,32 Bit Trace Port width,
Variable threshold level and termination voltage,
AUTOFOCUS self calibration technology,
Supports 1.2 to 3.3V - else contact support

Requires PowerTrace/Ethernet Version 6 or higher
or PowerTrace II
LA-3913A
Trace License for ARC AUTOFOCUS II

add to cart

goto to cart

Supported for ARC Real-Time Trace (ARC RTT)

if applied to an AUTOFOCUS II preprocessor

please add the serial number of the preprocessor to
your order

AUTOFOCUS II Preprocessors with serial number
C0806xxxxxx and lower have to be send to Lauterbach
Germany for an hardware upgrade

LA-3919
Preproc. for ARC/AUTOFOCUS 600 MIPI

add to cart

goto to cart

Preprocessor for ARC Real-Time Trace (ARC RTT)

Connector cable and software,
600 MHz clock speed,
8,16,32 Bit Trace Port width,
Variable threshold level and termination voltage,
AUTOFOCUS self calibration technology,
SAMTEC60 MIPI connector,
Supports 1.2 to 3.3V - else contact support

Requires PowerTrace/Ethernet Version 6 or higher
or PowerTrace II

LA-3535

add to cart

goto to cart

Serial Trace Port Controller with 4 Giga Byte Trace Memory
for ARC Real-Time Trace (ARC RTT)

requires PowerDebug II Ethernet or PowerDebug PRO

Host requirements:
USB 3.0 or 1000 MBit Ethernet interface,
4.0 GigaByte RAM
LA-3535A

add to cart

goto to cart

Supports off-chip trace port
for ARC Real-Time Trace (ARC RTT)

if applied to Power Trace Serial

please add the serial number of the Power Trace Serial to
your order

LA-7645

add to cart

goto to cart

Adapter for NEXUS on AVR32

(up to 16 bit MDO, up to 2 bit MSEO)
up to 200 MBit/s
Port Voltage 1.0 V .. 5.0 V

NEXUS probe provides 76 pin mictor connector

requires LA-7631 for Mictor 38 on target

includes software for Windows, Linux and MacOSX

only with PowerTrace Ethernet 256MB/512MB
or PowerTrace PX

please contact Lauterbach if the serial number of
your PowerTrace is lower than E03010003982
LA-7645A

add to cart

goto to cart

Supports debug/trace for NEXUSAVR32
applied to a NEXUS Autofocus preprocessor
LA-7631

add to cart

goto to cart

Converter from Mictor76 to Mictor38 for:
LA-7630 (NEXUS Debugger/Trace for MPC5xxx AutoFocus)
LA-7635 (NEXUS Debugger/Trace for MAC71xx AutoFocus)
LA-7645 (NEXUS Debugger/Trace for AVR32 AutoFocus)
LA-7620

add to cart

goto to cart

Adapter for NEXUS on MAC71xx, MAC72xx
with 38 pin mictor connector

includes software for Windows, Linux and MacOSX

requires LA-7690 PowerTrace Ethernet 512 MB
LA-7791

add to cart

goto to cart

Adapter for NEXUS on Spanish Oak (MPC565),
Silver Oak (MPC561) and Green Oak (MPC563)
with 38 pin mictor connector

includes software for Windows, Linux and MacOSX

only with PowerTrace Ethernet 256MB/512MB
or PowerTrace PX

AMP40NS NEXUS connector requires LA-7793
AMP50 NEXUS connector requires LA-7794
GLENAIR51 NEXUS connector requires LA-7797

LA-7793

add to cart

goto to cart

Converter from the 38 pin mictor connector on
Nexus Adapter for MPC56x family/Mictor38 (LA-7791)
to NEXUS/AMP40NS
LA-7794

add to cart

goto to cart

Converter from the 38 pin mictor connector on
Nexus Adapter for MPC56x family/Mictor38 (LA-7791)
to NEXUS/AMP50
LA-7797

add to cart

goto to cart

Converter from the 38 pin mictor connector on
Nexus Adapter for MPC56x family/Mictor38 (LA-7791)
to NEXUS 51 pin Glenair connector
LA-7785

add to cart

goto to cart

Converter from large NEXUS model AMP50
to small NEXUS model AMP50

to adapt to NEXUS on Spanish Oak (MPC565),
Silver Oak (MPC561) and Green Oak (MPC563)
LA-7630

add to cart

goto to cart

Parallel NEXUS Adapter with AutoFocus technology
for Qorivva MPC5xxx/SPC5xxx and PX series

includes debugger for eTPU and GTM

Concurrent debugging of multiple e200 cores on
multicore processors requires a
License for Multicore Debugging (LA-7960X)
(not necessary for lockstep mode)

Voltage range:
1..5 V
TRACE port:
2..16 MDO (data) lines
1..2 MSEO (control) lines
Data Bandwidth:
up to 200 MBit/s

76-pin mictor connector requires one of the
following converters

LA-7631 for Mictor 38 on target
LA-7632 for Glenair 51 on target
LA-7636 for SAMTEC 50 on target
LA-7637 for SAMTEC 20 on target

includes software for Windows, Linux and MacOSX

requires PowerTrace hardware

please contact Lauterbach if the serial number of
your PowerTrace is lower than E03010003982

LA-7630A

add to cart

goto to cart

Supports debug/trace for MPC55xx/56xx
applied to a NEXUS Autofocus Adapter

includes debugger for single core and eTPU

Concurrent debugging of both cores in
dual-core chip requires a
License for Multicore Debugging (LA-7960X)
(not necessary for lockstep mode)
LA-7631

add to cart

goto to cart

Converter from Mictor76 to Mictor38 for:
LA-7630 (NEXUS Debugger/Trace for MPC5xxx AutoFocus)
LA-7635 (NEXUS Debugger/Trace for MAC71xx AutoFocus)
LA-7645 (NEXUS Debugger/Trace for AVR32 AutoFocus)
LA-7632

add to cart

goto to cart

Adapter from Mictor76 to Glenair51 for:
LA-7630 (NEXUS Debugger/Trace for MPC5xxx AutoFocus)
LA-7633

add to cart

goto to cart

Converter from Mictor76 to Mictor38 for:
LA-7630 (NEXUS Debugger/Trace for MPC5xxx AutoFocus)
LA-7635 (NEXUS Debugger/Trace for MAC71xx AutoFocus)
LA-7636

add to cart

goto to cart

Converter from Mictor76 to Samtec50 for:
LA-7630 (NEXUS Debugger/Trace for MPC5xxx AutoFocus)
LA-7635 (NEXUS Debugger/Trace for MAC71xx AutoFocus)
LA-7637

add to cart

goto to cart

Converter from Mictor76 to Samtec20 for:
LA-7630 (NEXUS Debugger/Trace for MPC5xxx AutoFocus)
LA-7635 (NEXUS Debugger/Trace for MAC71xx AutoFocus)
LA-7638

add to cart

goto to cart

Converter from Mictor38 to Samtec50 for:
LA-7610 (NEXUS Debugger and Trace for MPC5xxx)
LA-7639

add to cart

goto to cart

Converter from Mictor38 to Samtec20 for:
LA-7610 (NEXUS Debugger and Trace for MPC5xxx)
LA-7641

add to cart

goto to cart

Converter from Samtec50 to Mictor38 for:
LA-7610 (NEXUS Debugger and Trace for MPC5xxx)
LA-7630 (NEXUS Debug/Trace for MPC5xxx AutoFocus)
LA-7640

add to cart

goto to cart

JTAG only converter from Mictor76, Mictor38,
Samtec50, Samtec20 or JTAG14 to Mictor38,
Samtec50, Samtec20 or JTAG14.
(Not all connectors can be mounted at
the same time. Please refer to the FAQ
Universal_JTAG-Adapter-LA-7640.pdf)

Connector types for top and bottom side must
be ordered explicitly!
LA-3725

add to cart

goto to cart

Converter Mictor38 (NEXUS) connector to 14 Pin JTAG
on target for MPC5xxx
LA-3857

add to cart

goto to cart

Converter for
- MPC5602B/3B/4B/2C/3C/4C (Bolero)

adaptation from
ET100-QF49 to BGA208 with additional Mictor38 NEXUS
debug connector

requires
TO-1250 (Emul. Adapter for T0 socket ET100-QF49)
LA-3852

add to cart

goto to cart

Converter for
- SPC560B40/B44/B50/C40/C44/C50 (Bolero)

adaptation from
ET100-QF49 to BGA208 with additional Mictor38 NEXUS
debug connector

requires
TO-1250 (Emul. Adapter for T0 socket ET100-QF49)
LA-3856

add to cart

goto to cart

Converter for
- MPC5602B/3B/4B/2C/3C/4C (Bolero)
adaptation from
ET144-QF63 to BGA208 with additional Mictor38 NEXUS
debug connector

requires
TO-1310 (Emul. Adapter for T0 socket ET144-QF63)
LA-3855

add to cart

goto to cart

Converter for
MPC5605B/6B/7B

adaptation from
ET176-QF67 to BGA208 with additional Mictor38 NEXUS
debug connector

requires
TO-1325 (Emul. Adapter for T0-socket ET176-QF67)
LA-3850

add to cart

goto to cart

Converter for
SPC560B54/B60/B64 (Bolero)

adaptation from
ET176-QF67 to BGA208 with additional Mictor38 NEXUS
debug connector

requires
TO-1325 (Emul. Adapter for T0-socket ET176-QF67)
LA-3854

add to cart

goto to cart

Converter for SPC56ECxx (Bolero3M)

adaptation from
ET176-QF67 to BGA256 with additional Mictor38 NEXUS
debug connector

requires
TO-1325 (Emul. Adapter for T0-socket ET176-QF67)
LA-3853

add to cart

goto to cart

Converter for MPC5646Cxxx (Bolero3M)

adaptation from
ET176-QF67 to BGA256 with additional Mictor38 NEXUS
debug connector

requires
TO-1325 (Emul. Adapter for T0-socket ET176-QF67)
LA-3911

add to cart

goto to cart

Aurora NEXUS Preprocessor for Qorivva MPC57xx/SPC57XX
(high-speed serial trace port)
- supports reference clock output up to 3125MHz

POWER TRACE II: full support
Supported speeds per lane:
4 lanes @ 4.25Gbps
3 lanes @ 6.0Gbps
2 lanes @ 6.25Gbps
1 lane @ 6.25Gbps


POWER TRACE ETHERNET or POWER TRACE PX limited support
Supported speeds per lane:
4 lanes @ 1.25 GBPS
2 lanes @ 2.5 GBPS
- POWER TRACE ETHERNET module must have serial number
E04xxxxxxxx or higher

Required converter:
- Samtec34 on target requires LA-3871:
Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec34
including Samtec 34-pin flex extension cable

- Samtec22 on target requires LA-3872:
Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec22
including Samtec 22-pin flex extension cable

LA-3911A

add to cart

goto to cart

Supports Qorivva MPC57xx/SPC57XX Aurora NEXUS
(high-speed trace port)

please add the serial number of the preprocessor to
your order

LA-3871

add to cart

goto to cart

Converter from JTAG14 of
LA-7753 (JTAG Debugger Qorivva MPC5xxx/SPC5xxx)

and from AUTO26 of
LA-2708 (Debugger for MPC5xxx Automotive PRO)
LA-3736 (JTAG Debugger for MPC5xxx Automotive)

and Samtec 40 pin of
LA-3911 (Preprocessor Aurora NEXUS Automotive)

to Samtec ERF 34-pin Power.ORG pinout

Includes Samtec 34-pin flex extension
LA-3872

add to cart

goto to cart

Converter from JTAG14 of
LA-7753 (JTAG Debugger Qorivva MPC5xxx/SPC5xxx)

and from AUTO26 of
LA-2708 (Debugger for MPC5xxx Automotive PRO)
LA-3736 (JTAG Debugger for MPC5xxx Automotive)

and Samtec 40 pin of
LA-3911 (Preprocessor Aurora NEXUS Automotive)

to Samtec ERF 22-pin Power.ORG pinout

Includes Samtec 22-pin flex extension

for LA-3911 Preproc. Aurora NEXUS

and if no separate JTAG/AUTO connector is available
on the target, for
LA-7753 (JTAG Debugger Qorivva MPC5xxx/SPC5xxx)
LA-3545

add to cart

goto to cart

Serial Trace Port Controller with 4 Giga Byte Trace Memory
for MPC57xx/SPC57XX

Required converter:
- Samtec34 on target requires LA-3871:
Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec34
including Samtec 34-pin flex extension cable

- Samtec22 on target requires LA-3872:
Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec22
including Samtec 22-pin flex extension cable

requires PowerDebug II Ethernet or PowerDebug PRO

Host requirements:
USB 3.0 or 1000 MBit Ethernet interface,
4.0 GigaByte RAM

LA-3545A

add to cart

goto to cart

Supports off-chip trace port for
MPC57xx/SPC57XX

if applied to Power Trace Serial

please add the serial number of the Power Trace Serial to
your order

LA-3871

add to cart

goto to cart

Converter from JTAG14 of
LA-7753 (JTAG Debugger Qorivva MPC5xxx/SPC5xxx)

and from AUTO26 of
LA-2708 (Debugger for MPC5xxx Automotive PRO)
LA-3736 (JTAG Debugger for MPC5xxx Automotive)

and Samtec 40 pin of
LA-3911 (Preprocessor Aurora NEXUS Automotive)

to Samtec ERF 34-pin Power.ORG pinout

Includes Samtec 34-pin flex extension
LA-3872

add to cart

goto to cart

Converter from JTAG14 of
LA-7753 (JTAG Debugger Qorivva MPC5xxx/SPC5xxx)

and from AUTO26 of
LA-2708 (Debugger for MPC5xxx Automotive PRO)
LA-3736 (JTAG Debugger for MPC5xxx Automotive)

and Samtec 40 pin of
LA-3911 (Preprocessor Aurora NEXUS Automotive)

to Samtec ERF 22-pin Power.ORG pinout

Includes Samtec 22-pin flex extension

for LA-3911 Preproc. Aurora NEXUS

and if no separate JTAG/AUTO connector is available
on the target, for
LA-7753 (JTAG Debugger Qorivva MPC5xxx/SPC5xxx)
LA-1221

add to cart

goto to cart

60 mm flex extension for MICTOR 38 pin connector
horizontal-vertical
LA-1222

add to cart

goto to cart

55 mm flex extension for MICTOR 38 pin connector
vertical-vertical
LA-1218

add to cart

goto to cart

200 mm flex extension for Mictor 76pin connector
LA-1223

add to cart

goto to cart

75 mm flex extension for 2.54 mm 20 pin connector
with shrouded post-strips horizontal-horizontal
LA-1224

add to cart

goto to cart

75 mm flex extension for 2.54 mm 20 pin connector
horizontal-horizontal
LA-1228

add to cart

goto to cart

140 mm flex extension 60 pin SAMTEC QTH-QSH,
e.g. Tricore with SAMTEC QTH connector LA-7928
e.g. ARM-ETM/AUTOFOCUS 600 MIPI LA-7993
e.g. Preprocessor for Intel® PT AUTOFOCUS MIPI60 LA-3907
similar in design as LA-1238, LA-1248 and LA-1249
LA-1238

add to cart

goto to cart

330 mm flex extension 60 pin SAMTEC QTH-QSH,
e.g. Tricore with SAMTEC QTH connector LA-7928
e.g. ARM-ETM/AUTOFOCUS 600 MIPI LA-7993
e.g. Preprocessor for Intel® PT AUTOFOCUS MIPI60 LA-3907
similar in design as LA-1228, LA-1248 and LA-1249
LA-1229

add to cart

goto to cart

170 mm flex extension for
60 pin SAMTEC BTH-BSH connector
e.g. XDP60 Intel® x86/x64 debugger
LA-1370

add to cart

goto to cart

110 mm flex extension for Mictor 38pin connector
LA-1371

add to cart

goto to cart

200 mm flex extension for Mictor 38pin connector
LA-1230

add to cart

goto to cart

140 mm flex extension for
20 pin SAMTEC ERM-ERF connector
e.g. Nexus Autofocus
LA-1231

add to cart

goto to cart

140 mm flex extension for
50 pin SAMTEC ERM-ERF connector
e.g. Nexus Autofocus
LA-1232

add to cart

goto to cart

180 mm flex extension for
40 pin SAMTEC ERM-ERF connector
incl. CCS-female-female adaption
e.g. Preproc. for ARM-ETM/HSSTP HF-Flex
LA-7988
LA-1233

add to cart

goto to cart

290 mm flex extension for
34 pin SAMTEC ERM-ERF connector
partial differential pairs!
LA-1234

add to cart

goto to cart

290 mm flex extension for
22 pin SAMTEC ERM-ERF connector
partial differential pairs!
LA-1239

add to cart

goto to cart

500 mm flex extension for PowerTrace Serial
80 pin SAMTEC ERM8-ERM8 connector
LA-1235

add to cart

goto to cart

500 mm flex extension for
40 pin SAMTEC ERM8-ERF8 connector
e.g. for PowerTrace Serial
LA-1248

add to cart

goto to cart

200 mm flex extension 60 pin SAMTEC QTH-QSH,
e.g. WHISKER-QP-MIPI60-Q LA-4611
e.g. Tricore with SAMTEC QTH connector LA-7928
e.g. ARM-ETM/AUTOFOCUS 600 MIPI LA-7993
e.g. Preprocessor for Intel® PT AUTOFOCUS MIPI60 LA-3907
similar in design as LA-1228, LA-1238 and LA-1249
LA-1249

add to cart

goto to cart

610 mm flex extension 60 pin SAMTEC QTH-QSH,
e.g. WHISKER-QP-MIPI60-QL LA-4612
e.g. Tricore with SAMTEC QTH connector LA-7928
e.g. ARM-ETM/AUTOFOCUS 600 MIPI LA-7993
e.g. Preprocessor for Intel® PT AUTOFOCUS MIPI60 LA-3907
similar in design as LA-1228, LA-1238, and LA-1248
LA-1181
Extender SAM20-ERF8-ERM8

add to cart

goto to cart

Extension for Samtec ERF8-ERM8 Series
20 Positions
(Extents vertical clearance of 11,5 mm)
LA-1182
Extender SAM22-ERF8-ERM8

add to cart

goto to cart

Extension for Samtec ERF8-ERM8 Series
22 Positions
(Extents vertical clearance of 11,5 mm)
LA-1183
Extender SAM34-ERF8-ERM8

add to cart

goto to cart

Extension for Samtec ERF8-ERM8 Series
34 Positions
(Extents vertical clearance of 11,5 mm)
LA-1184
Extender SAM40-ERF8-ERM8

add to cart

goto to cart

Extension for Samtec ERF8-ERM8 Series
40 Positions
(Extents vertical clearance of 11,5 mm)
LA-1185
Extender SAM50-ERF8-ERM8

add to cart

goto to cart

Extension for Samtec ERF8-ERM8 Series
50 Positions
(Extents vertical clearance of 11,5 mm)
LA-1186
Extender SAM70-ERF8-ERM8

add to cart

goto to cart

Extension for Samtec ERF8-ERM8 Series
70 Positions
(Extents vertical clearance of 11,5 mm)
e.g. Target Board Freescale QorIQ B4860QDS
LA-4597

add to cart

goto to cart

Debug cable and 512 MByte of trace memory

Supports Standard-JTAG, cJTAG and
Serial Wire Debug Port

Bandwidth of 400 MBit/s per trace channel

requires at least one of the following A-licenses:
LA-7742A (JTAG Debugger License for ARM9 Add.)
LA-7746A (JTAG Debugger License for ARM7 Add.)
LA-7765A (JTAG Debugger License for ARM11 Add.)
LA-7843A (JTAG Debugger License for CORTEX-A Add.)
LA-7844A (JTAG Debugger License for CORTEX-M Add.)

Trace support (up to 4-bit) included:
- MIPI System Trace
- ITM via Serial Wire Output/TPIU
- ETM Cortex-M continuous mode via TPIU

Supports the following trace licenses:
LA-7970X (Trace License for the ARM Architecture)

requires Power Debug Interface USB 3.0,
Power Debug II or Power Debug PRO

5V tolerant inputs; max. output level 3.3V

Consists of
LA-4572 CombiProbe 2 Hardware
LA-4513 Whisker MIPI20T-HS CombiProbe/uTrace Arm
LA-2109 Half-Size-Cable 20-20 short
LA-2108 Half-Size-Cable 20-10 short
LA-2730 ARM Converter MIPI-20T to ARM-20
LA-4505 Whisker Cable MIPI34 for CombiProbe
LA-1937 MIPI-Half-Size-Cable 34-10
LA-1938 MIPI-Half-Size-Cable 34-20
LA-1939 MIPI-Half-Size-Cable 34
LA-3771 ARM Converter MIPI-34 to ARM-20 or TI-14

LA-4513U
Upgrade to Whisker MIPI20T-HS

add to cart

goto to cart

Upgrade to Whisker Cable MIPI20T/MIPI10
for CombiProbe/uTrace

Your old Whisker Cable MIPI34 must be returned on
receipt of the replacement Whisker Cable MIPI20T-HS
LA-4503
Package for CombiProbe ARM

Debug cable and 128-MByte of trace memory

Supports Standard-JTAG, cJTAG and
Serial Wire Debug Port

Bandwidth of 400 MBit/s per trace channel

requires at least one of the following A-licenses:
LA-7742A (JTAG Debugger License for ARM9 Add.)
LA-7746A (JTAG Debugger License for ARM7 Add.)
LA-7765A (JTAG Debugger License for ARM11 Add.)
LA-7843A (JTAG Debugger License for CORTEX-A Add.)
LA-7844A (JTAG Debugger License for CORTEX-M Add.)

Trace support (up to 4-bit) included:
- MIPI System Trace
- ITM via Serial Wire Output/TPIU
- ETM Cortex-M continuous mode via TPIU

Supports the following trace licenses:
LA-7970X (Trace License for the ARM Architecture)

requires Power Debug Interface USB 3.0,
Power Debug II or Power Debug PRO

5V tolerant inputs; max. output level 3.3V

Superseded by LA-4597 Package for CombiProbe 2 ARM

Consists of
LA-4570 CombiProbe Hardware
LA-4513 Whisker MIPI20T-HS CombiProbe/uTrace Arm
LA-2109 Half-Size-Cable 20-20 short
LA-2108 Half-Size-Cable 20-10 short
LA-2730 ARM Converter MIPI-20T to ARM-20
LA-4505 Whisker Cable MIPI34 for CombiProbe
LA-1937 MIPI-Half-Size-Cable 34-10
LA-1938 MIPI-Half-Size-Cable 34-20
LA-1939 MIPI-Half-Size-Cable 34
LA-3771 ARM Converter MIPI-34 to ARM-20 or TI-14

LA-4502
CombiProbe ARM-Debugger and 4-Bit Trace

Debug cable and 128-MByte of trace memory

Supports Standard-JTAG, cJTAG and
Serial Wire Debug Port

Bandwidth of 200 MBit/s per trace channel

requires at least one of the following A-licenses:
LA-7742A (JTAG Debugger License for ARM9 Add.)
LA-7746A (JTAG Debugger License for ARM7 Add.)
LA-7765A (JTAG Debugger License for ARM11 Add.)
LA-7843A (JTAG Debugger License for CORTEX-A Add.)
LA-7844A (JTAG Debugger License for CORTEX-M Add.)

Trace support (up to 4-bit) included:
- MIPI System Trace
- ITM via Serial Wire Output/TPIU
- ETM Cortex-M continuous mode via TPIU

Supports the following trace licenses:
LA-7970X (Trace License for the ARM Architecture)

requires Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or Power Debug PRO

5V tolerant inputs; max. output level 3.3V

Superseded by LA-4597 Package for CombiProbe 2 ARM

LA-4508

add to cart

goto to cart

Converter CombiProbe/uTrace to
LA-7949 Analog Probe for PowerIntegrator

LA-3771
ARM Converter MIPI-34 to ARM-20 or TI-14

add to cart

goto to cart

Converter to connect the CombiProbe to an ARM-20
connector specified by ARM or to a TI-14 connector
specified by Texas Instruments

Converts to debug cable connector
LA-2730

add to cart

goto to cart

Converter from MIPI-20T to ARM-20
LA-3782
Converter MIPI-34 to TI-20-Compact

add to cart

goto to cart

Converter to connect the CombiProbe to a connector
specified by Texas Instruments (TI) which is used
on a few targets with TI processors.
LA-3768
ETMv1 Conv. Mictor-38, 2x MIPI-34 to MIPI-60

add to cart

goto to cart

ARM Converter to connect an ARM Preprocessor with
one Mictor-38 for 16-bit ETMv1 and two CombiProbes
for two 4-bit system trace ports to a MIPI-60
connector on the target.
LA-3769

add to cart

goto to cart

Converter to connect Preprocessor AUTOFOCUS II Mictor38
and 2 MIPI34 CombiProbes to MIPI60 (QSH) connector

ARM/Cortex: Converter to connect Mictor38 TRACE A (16-bit ETMv3)
and two MIPI34 CombiProbes to MIPI60 (QSH) connector on the
target

x86/x64: Converter to connect Mictor38 TRACE A and a MIPI34
CombiProbes to MIPI60 (QSH) connector on the target
LA-3813
OMAP3 Conv. Mictor-38, MIPI-34 to Mictor-38

add to cart

goto to cart

Converter to connect an ARM Preprocessor and a
CombiProbe to a Mictor connector on the target.
This converter is designed for the OMAP3503 board
from Spectrum Digital. The upper ETM signals on
the Mictor can alternatively be used for system
trace (SDTI).
LA-3784
Converter MIPI-34 to MIPI-60

add to cart

goto to cart

Converter to connect the CombiProbe to a MIPI-60
connector on the target
LA-3810

add to cart

goto to cart

Converter to connect an ARM Preprocessor (up to
24-bit PTM/ETMv3) and up to three CombiProbes
(3x STM/STP) to a MIPI-60 connector on the target.
This converter is designed for U8500/U5500
from ST Ericsson.
LA-3812
OMAP4 Conv. 2xMictor, ARM20, MIPI34 to MIPI60

add to cart

goto to cart

Converter to connect an ARM Preprocessor (up to
18-bit PTM) and one CombiProbe (STM; two connection
options) or a Debug Cable to a MIPI-60 connector on
the target. This converter is designed for
OMAP4xxx based boards from Texas Instruments.
LA-3814
ETMv3 Conv. Mictor-38, MIPI-34 to MIPI-60

add to cart

goto to cart

ARM Converter to connect an ARM Preprocessor with
one Mictor-38 for 16-bit ETMv3 and one CombiProbe
for a 4-bit system trace port to a MIPI-60
connector on the target
LA-3840

add to cart

goto to cart

Converter to connect an ARM Preprocessor (16-bit PTM)
or a CombiProbe (4-bit STM) to the OMAP4430
PandaBoard
LA-3787
Converter MIPI-34 to SD or Micro SD Socket

add to cart

goto to cart

Converter to connect the CombiProbe to a SD or Micro
SD card connector in case the signals alternatively
provide debug functionality
LA-3862

add to cart

goto to cart

Converter to connect the ARM Debug Cable or
the CombiProbe to a Mictor connector on the
target. This is needed if you want to debug
without a Preprocessor and if there is only
a Mictor connector on the target.
The trace signals of the CombiProbe are
connected to the lowest four trace signals of
the Mictor (ETMv3 pinout, continuous mode).
But tracing is normally no use case due to
the bandwidth limitations of the CombiProbe.
LA-4509
CombiProbe Intel x86/x64 MIPI34

Debug cable and 128-MByte of trace memory
for Intel x86/x64 processors with PTI/STP only

Since the CombiProbe Intel x86/x64 MIPI34 Whisker cable
does not have a serial termination, please contact our
technical support if you want to add a license for another
processor architecture

requires the following A-license:
LA-3776A (JTAG Debugger for Intel x86/x64)

requires Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or Power Debug PRO

5V tolerant inputs; max. output level 3.3V

Superseded by LA-4512 CombiProbe Intel x86/x64 MIPI60-C

LA-4510
Whisker for CombiProbe Intel x86/x64 MIPI34

Whisker Cable for CombiProbe MIPI34 for Intel x86/x64
LA-3790
Conv. Intel x86/x64 MIPI34 to XDP60

add to cart

goto to cart

Converter from MIPI34 connector on
CombiProbe for x86/x64 to 60 pin
XDP (Samtec) connector
JTAG for all platforms, 4-bit System Trace only for Medfield
LA-3861
Converter MIPI-34 to Intel FPC-41

add to cart

goto to cart

Converter from MIPI34 connector on
CombiProbe for Intel x86/x64 to FPC 41pin
(Panasonic) connector

Adapter for the Intel Medfield Smartphone
Reference Platform
LA-4508

add to cart

goto to cart

Converter CombiProbe/uTrace to
LA-7949 Analog Probe for PowerIntegrator

LA-4590

add to cart

goto to cart

Package for CombiProbe MIPI60-Cv2

requires Power Debug Interface USB 3.0,
Power Debug II or Power Debug PRO

requires an A-license

Consists of
LA-4572 CombiProbe 2 Hardware
LA-4571 Whisker Cable MIPI60-Cv2 for CombiProbe
LA-1228 Flex Ext. for SAM 60 pin QTH-QSH series 05.00

LA-4591

add to cart

goto to cart

Package for CombiProbe MIPI60-Cv2

requires Power Debug Interface USB 3.0,
Power Debug II or Power Debug PRO

requires an A-license

Consists of
LA-4572 CombiProbe 2 Hardware
LA-4571 Whisker Cable MIPI60-Cv2 for CombiProbe
LA-1238 Flex Ext. for SAM 60 pin QTH-QSH series 12.00

LA-4571

add to cart

goto to cart

Whisker Cable MIPI60-Cv2 for CombiProbe

Requires one of the following extension cables:
LA-1228 Flex Ext. for SAM 60 pin QTH-QSH series 05.00
LA-1238 Flex Ext. for SAM 60 pin QTH-QSH series 12.00
LA-3879

add to cart

goto to cart

Converter from MIPI60-Q or MIPI60-Cv2 pin-out to XDP 60 pin-out
LA-2725

add to cart

goto to cart

Converter from Intel MIPI60-Cv2 to Intel MIPI60-C pin-out on target
LA-2727

add to cart

goto to cart

Converter from Intel MIPI60-Cv2 to MIPI34 pin-out on target

Converts termination scheme Intel
(50 Ohm parallel termination at receiver)
to termination scheme ARM
(50 Ohm series termination at sender)

Support for JTAG/SWD

Maps Intel specific debug signals to MIPI34 pins.
Default mapping:
Intel PREQ ->
DBGREQ (pin 18 on MIPI34)

Intel PRDY ->
DBGACK (pin 20 on MIPI34)

Intel HOOK6 (PMODE) ->
RTCK (pin 12 on MIPI34)

Intel HOOK0 (PowerGood) ->
BCE (pin 14 on MIPI34)

Intel HOOK7 (ResetOut) ->
RESET (pin 10 on MIPI34)

TVREF (trace reference voltage) ==
DVREF (debug reference voltage)

For other possible options,
please contact Lauterbach.
LA-2728

add to cart

goto to cart

Combination of two converters to adapt from Intel MIPI60-Cv2
to MIPI20 pin-out on target
LA-4595

add to cart

goto to cart

Package for CombiProbe DCI OOB

requires Power Debug Interface USB 3.0,
Power Debug II or Power Debug PRO

requires an A-license

Consists of
LA-4572 CombiProbe 2 Hardware
LA-4515 Whisker Cable DCI OOB for CombiProbe

LA-4585

Package for CombiProbe DCI OOB

requires Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or PowerDebug PRO

requires an A-license

Superseded by LA-4595 Package CombiProbe 2 Intel® DCI OOB

LA-4515

add to cart

goto to cart

DCI OOB cable for CombiProbe

supports DCI OOB via USB
LA-4552

add to cart

goto to cart

Debug cable and 512-MByte of trace memory
support for DAP Streaming

Supports
- DAP (DAP2, DAP3, DAPWide, DAP4): up to 160 MHz,
3.3 V or 5.0 V
- JTAG: 1.8-5.0 V, up to 60 MHz
- DXCPL
DAP streaming requires a DAP mode. For performance reasons,
we recommend DAPWide at 160 MHz.

26-pin Automotive Connector

requires the following A-license:
LA-7756A (Debugger for TriCore Standard Additional)

trace analysis and display requires
LA-3799X (Trace License for TriCore ED)

requires Power Debug Interface USB 3.0,
Power Debug II or PowerDebug PRO

Consists of
LA-4572 CombiProbe 2 Hardware
LA-4553 Whisker TriCore DAP Streaming for CombiProbe
LA-1947 Automotive HALF-SIZE-CABLE 26-10
LA-1948 Automotive HALF-SIZE-CABLE 26-20
LA-1949 Automotive HALF-SIZE-CABLE 26-26

LA-4553

add to cart

goto to cart

DAP streaming cable for CombiProbe

Supports
- DAP (DAP2, DAP3, DAPWide, DAP4): up to 160 MHz,
3.3 V or 5.0 V
- JTAG: 1.8-5.0 V, up to 60 MHz
- DXCPL
DAP streaming requires a DAP mode. For performance reasons,
we recommend DAPWide at 160 MHz.

26-pin Automotive Connector
LA-4550

Debug cable and 128-MByte of trace memory
support DAP Streaming up to 150 MHz
for the following TC23x, TC26x, TC29x
Aurix ED devices

26-pin Automotive Connector

requires the following A-license:
LA-7756A (Debugger for TriCore Standard Additional)

trace analysis and display requires
LA-3799X (Trace License for TriCore ED)

requires Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, PowerDebug Pro
or Power Debug II

5V tolerant inputs; max. output level 3.3V

Superseded by LA-4552 Package for CombiProbe 2 TriCore DAP

Consists of
LA-4570 CombiProbe Hardware
LA-4551 Whisker Cable TriCore DAP for CombiProbe
LA-1947 Automotive HALF-SIZE-CABLE 26-10
LA-1948 Automotive HALF-SIZE-CABLE 26-20
LA-1949 Automotive HALF-SIZE-CABLE 26-26

LA-4551

DAP cable for CombiProbe

26-pin Automotive Connector

Superseded by LA-4553 Whisker TriCore DAP Streaming for CombiProbe
LA-4504
CombiProbe MIPS32-Debugger and 4-Bit IFLOW

add to cart

goto to cart

Debug cable and 128-MByte of trace memory

requires the following A-license:
LA-7760A (JTAG Debugger for MIPS32)

4-Bit IFlow program trace requires:
LA-7971X (Trace License for the MIPS32)

requires Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or Power Debug PRO

5V tolerant inputs; max. output level 3.3V
LA-3781
Converter MIPI-34 to JTAG MIPS14 + IFLOW

add to cart

goto to cart

Converter MIPI-34 to
14 pin JTAG MIPS and
IFLOW Trace10
includes 10 pin Cable 100 mm
LA-4508

add to cart

goto to cart

Converter CombiProbe/uTrace to
LA-7949 Analog Probe for PowerIntegrator

LA-4506
CombiProbe C166V2-Debugger and 4-Bit Trace

add to cart

goto to cart

supports C166 V2

Debug cable and 128-MByte of trace memory

requires the following A-license:
LA-7759A (OCDS Debugger for C166S V2)

optional
LA-7789A (JTAG Debugger for OAK/Teaklite-SEIB Add.)

MCDS program flow trace requires:
LA-7975X (Off-Chip Trace for MCDS of C166S-V2)

requires Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or Power Debug PRO

5V tolerant inputs; max. output level 3.3V

LA-3783
Converter MIPI-34 to C166-16

add to cart

goto to cart

Converter MIPI-34 to
16 pin C166 target adapter
LA-4508

add to cart

goto to cart

Converter CombiProbe/uTrace to
LA-7949 Analog Probe for PowerIntegrator

LA-4415
Package CombiProbe Type-C (Type-C Port)

add to cart

goto to cart

Package for CombiProbe Type-C (Type-C Port)

requires Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
or PowerDebug PRO

requires an A-license

Consists of
LA-4570 CombiProbe Hardware
LA-4400 USB-C Breakout Module (Type-C Port)
LA-4405 Cable USB-C to USB-C Breakout Module

LA-4400
USB-C Breakout Module (Type-C Port)

add to cart

goto to cart
LA-7480

add to cart

goto to cart

adapter for 16-bit DIL-EPROM,
connection to DIL42 for 16, 32 and 64 MBit EPROM
LA-7505

add to cart

goto to cart

2 adapters for 8-Bit PLCC-EPROMs (10,6 mm),
connection to PLCC32
LA-7483

add to cart

goto to cart

2 short adapters for 8-Bit PLCC-EPROMs (4,5 mm),
connection to PLCC32
LA-7506

add to cart

goto to cart

adapter for 16-Bit PLCC-EPROM (10,6 mm),
connection to PLCC44
LA-7509

add to cart

goto to cart

Converter from DIL40 to SO44 package (1.27mm x 16mm)
for 16-Bit Flash
LA-7481

add to cart

goto to cart

adapter for 16-bit EPROM,
connection to SO44 for 16 MBit EPROM
LA-7482

add to cart

goto to cart

Adapter to ESI-CON universal connector,
supports 8 and 16 bit, 3,3 V and 5 V devices,
up to 64 MBit, high-speed download 500 KByte/sec.
LA-7510

add to cart

goto to cart

support 68K family

includes software for Windows
LA-7510D

add to cart

goto to cart

support 68K family for serial access,
includes HLL debugger, operation system,

licensed for one host system via USB dongle
for Windows32, Windows64, Linux32, Linux64
and MAC OS X
LA-7512

add to cart

goto to cart

support 80C166, C165, C167, PMB2705 GOLD, ST10,
includes HLL debugger, operation system,

includes software for Windows
LA-7512D

add to cart

goto to cart

support C166/C167 family for serial access,
includes HLL debugger, operation system,

licensed for one host system via USB dongle
for Windows32, Windows64, Linux32, Linux64
and MAC OS X
LA-7534

add to cart

goto to cart

supports 186 family
includes HLL debugger, operation system,

includes software for Windows
LA-7534D

add to cart

goto to cart

supports 186 family
includes HLL debugger, operation system,

licensed for one host system via USB dongle
for Windows32, Windows64, Linux32, Linux64
and MAC OS X
LA-7516
ROM Monitor for 80C196 on ESI

add to cart

goto to cart

support 80C196, 80C194, 80C198,
includes HLL debugger, operation system,

includes software for Windows
LA-7535
ROM Monitor for 286 family on ESI

add to cart

goto to cart

supports 286 family
includes HLL debugger, operation system,

includes software for Windows
LA-7535D
ROM Monitor for 286 family Serial Access UD

add to cart

goto to cart

supports 286 family
includes HLL debugger, operation system,

licensed for one host system via USB dongle
for Windows32, Windows64, Linux32, Linux64
and MAC OS X
LA-7530

add to cart

goto to cart

supports 386/486
includes HLL debugger, operation system,

includes software for Windows
LA-7528
ROM Monitor for H8/300H and H8S family on ESI

add to cart

goto to cart

supports H8/300H and H8S
includes HLL debugger, operation system,

includes software for Windows
LA-7528D
ROM Monitor for H8/300H or H8S Serial Acc. UD

add to cart

goto to cart

supports H8S
includes HLL debugger, operation system,

licensed for one host system via USB dongle
for Windows32, Windows64, Linux32, Linux64
and MAC OS X
LA-7526
ROM Monitor for SH family on ESI

add to cart

goto to cart

supports SH702x/703x, SH701x/704x, SH705x
includes HLL debugger, operation system,

includes software for Windows
LA-7526D
ROM Monitor for SH family Serial Access UD

add to cart

goto to cart

supports SH702x/703x, SH701x/704x, SH705x
includes HLL debugger, operation system,

licensed for one host system via USB dongle
for Windows32, Windows64, Linux32, Linux64
and MAC OS X
LA-7515D
ROM Monitor for TriCore Serial Access UD

add to cart

goto to cart

support TriCore AUDO-NG family for serial access,
includes HLL debugger, operation system,

licensed for one host system via USB dongle
for Windows32, Windows64, Linux32, Linux64
and MAC OS X
LA-7518
ROM Monitor for Z80 on ESI

add to cart

goto to cart

support Z80 family,
includes HLL debugger, operation system,

includes software for Windows
LA-7930

add to cart

goto to cart

ICD State-Timing Analyzer, 64 Channels 100 MHz,
32 Channels 200 MHz, 16 Channel 400 MHz,
Transient Recording,
128 KFrames, 48 Bit Time-Stamp,
Trigger Filter, Trigger Delay, etc.
Requires PODBUS-Interface, No SOC-CON Support

LA-7931

add to cart

goto to cart

ICD State-Timing Analyzer, 64 Channels 100 MHz,
32 Channels 200 MHz, 16 Channels 400 MHz,
Transient Recording, 256 KFrames, 48 Bit Time-Stamp,
Complex Trigger, 8 Trigger Events, 4 Trigger Levels,
3 Counters (45 bit),
Trigger Filter, Trigger Delay, etc.,
50 MHz Pattern Generator (9 bit),
Requires PODBUS-Interface, Option for SOC Trace