µTrace® for Cortex-M®


The embedded tools company
Configurations
Connector Cables


KINETIS Pelican STELLARIS STELLARISSTELLARIS

µTrace® for Cortex-M®
  Highlights
All-in-one debug and trace solution for Cortex-M
Recommended for single-core microcontrollers with Cortex-M
Recommended for multi-core microcontrollers with solely Cortex-M (single debug port)

256MByte trace memory
USB 3 interface to the host computer
TRACE32 Streaming up to 150 MByte/s
Support for all Cortex-M based microcontrollers


Support
Technical Support



 

Configurations


microtrace_config

Configurations for µTrace®

The photo on the left side shows a standard configuration with a MIPI20T-HS whisker cable plugged to connector A. The extended configuration shown on the right side shows additionally a TRACE32 Analog Probe plugged to connector B via a Converter uTrace to PI-Analog Probe. The TRACE32 Analog Probe enables an energy profiling of your application.

 

Connector Cables


Whisker MIPI20T for Arm/Cortex
  • Support for MIPI20T and MIPI10 pinout
  • Support for standard JTAG, Serial Wire Debug, and cJTAG (IEEE 1149.7)
  • 400 MBit/s per trace channel
  • AutoFocus Self-Calibration for Cortex-M
  • Voltage range 1.2V to 5V

TRACE32 Analog Probe
  • 4 voltage channels: 12-bit resolution, input range 0..5 V, impedance 1 MOhm
  • 3 current channels with 5% accuracy: external shunt required
  • Sampling rate of 625 KSamples/sec





Copyright © 2019 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany   Impressum     Privacy Policy
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice. Report Errors
Last generated/modified: 19-Aug-2019