FAQs Archive for In-Circuit Emulator for Z80 and Z180


The embedded tools company

Search FAQs



PDF document ( 75KB / 02-Jun-2020 )


How must a Z84C15 target be prepared for the emulation, using a Z80 emulator? (Z80C15)
Ref: 0047

To run the emulation mode on the target CPU, the EV pin must be tied to "high". The TRACE32 Z80 emulation probes of the Z84C11/C13/15 emulators, drive the EV pin with a 100 Ohm resistor. On the target, it is recommended to connect the EV pin via a 1 kOhm resistor to ground.




Copyright © 2020 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany   Impressum     Privacy Policy
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice. Report Errors
Last generated/modified: 15-Oct-2020