TRACE32 CombiProbe 2 Arm® CoreSight™ STM

The embedded tools company
Standard Tool Configuration
Connection Cables

TRACE32 CombiProbe 2  for Arm®  STM
Recommended for STM tracing to profile AUTOSAR Adaptive Platform
Recommended for STM tracing with follow up analysis by customer specific applications

Debug cable and 512 MByte of trace memory
Whisker MIPI20T for Arm/Cortex and Whisker MIPI34
TRACE32 Streaming up to 85 MByte/s


Standard Tool Configuration


The left photo shows the TRACE32 standard configuration with USB3 as host interface. The right photo shows the TRACE32 configuration for Gigabit Ethernet.


Connection Cables

Whisker MIPI20T for Arm/Cortex
  • Support for MIPI20T and MIPI10 pinout
  • Support for standard JTAG, Serial Wire Debug, and cJTAG (IEEE 1149.7)
  • 400 MBit/s per trace channel
  • AutoFocus Self-Calibration for Cortex-M
  • Voltage range 1.2V to 5V

Whisker MIPI34
  • Support for MIPI10, MIPI20T, MIPI20D and MIPI34 pinout
  • Support for standard JTAG, Serial Wire Debug, and cJTAG (IEEE 1149.7)
  • 200 MBit/s per trace channel
  • Voltage range 0.3 V to 3.3 V (5V tolerant)



ARTI-Compliant Profiling of AUTOSAR Adaptive Platform
  • STM based task state profiling
  • AUTOSAR ARTI compliant
  • TRACE32 Streaming enables very long recording times

Copyright © 2023 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany   Impressum     Privacy Policy
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice. Report Errors
Last generated/modified: 09-Jan-2023