Adaptation for XC800 Debugger via OCDS


The embedded tools company
Debugger Connector for XC800
Target Connector for XC800
Half-Size Adapters




Support
Technical Support
 

Debugger Connector for XC800


Connector 16 pin


Signal

Pin

 Pin

Signal

    
TMS12VCCS
TDO34GND
N/C56GND
TDI78RESET-
TRST-910BRKOUT-
TCLK1112GND
BRKIN-1314N/C
RESERVED1516N/C
    

 

Target Connector for XC800


Dimension

Connector Type

  • This is a standard 16 pin double row (two rows of 8 pins) connector (pin to pin spacing: 2.54mm/0.100").
  • If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 25.5mm/1".
 

Half-Size Adapters


Half-Size Adapters for Debuggers



  • 100 mil to 50 mil Adapters
  • Small Footprint for Target Connector






Copyright © 2024 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany   Impressum     Privacy Policy
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice. Report Errors
Last generated/modified: 07-Mar-2024