Adaptation for RX


The embedded tools company
Debug and Trace Adaption for RX
Half-Size Adapters




Support
Technical Support
 

Debug and Trace Adaption for RX


Debugger Adaption Debugger Adaption on MICTOR Debugger and Trace Adaption on MICTOR

Target Connector for Debugger Adaption for RX

Target Connector 14 pin


Connector Type

  • This is a standard 14 pin double row (two rows of 7 pins) connector (pin to pin spacing: 2.54mm/0.100").
  • If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 23mm/0.9".

Pinout

Signal

Pin

 Pin

Signal

    
TCK12GND
TRST-34(EMLE)
TDO56(MDE)
(MD1)78VCC
TMS910(MD0)
TDI1112GND
RESET-1314GND
    



 

Half-Size Adapters


Half-Size Adapters for Debuggers
  • 100 mil to 50 mil Adapters
  • Small Footprint for Target Connector





Copyright © 2024 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany   Impressum     Privacy Policy
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice. Report Errors
Last generated/modified: 07-Mar-2024