Adaptation RISC-V Debugger


The embedded tools company
Target Connector IDC20A
Target Connector 20 pin: 2.54mm pin dimension


Adaptation RISC-V  Debugger


Support
Technical Support

Adaptation

The adaptation applies for the following TRACE32® products:

Order No.Probe
LA-2717Debugger for RISC-V (ICD) out of production
LA-3200Debugger for RISC-V 32-Bit (PACK) 
LA-3201Debugger for RISC-V 64-Bit (PACK) 

Converter

Picture
Order No.
Probe
Converter IDC20A to RISC-V SiFive-12 PIN PMOD
Converter IDC20A to MIPI-10/20/34
Converter IDC20A to Digilent PMOD™
 

Target Connector IDC20A


Signal

Pin

 Pin

Signal

    
VREF-DEBUG12N/C
TRST-34GND
TDI56GND
TMS78GND
TCK910GND
RTCK1112GND
TDO1314GND
RESET-1516GND
N/C1718GND
N/C1920GND
    
Target connector, top-view

Note: Pin2, Pin17 and Pin19 must under no circumstances be connected on the target side. Otherwise the hardware of the debugger can get damaged.
 

Target Connector 20 pin: 2.54mm pin dimension


Target Connector Type

  • This is a standard 20 pin double row (two rows of 10 pins) connector (pin to pin spacing: 2.54mm/0.100").
  • If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 30.6mm/1.2".
  • Examples with housing: Samtec HTST-110-01-L-D (through-hole); Samtec HTST-110-01-L-DV (surface mount).
  • Examples without housing: Samtec TSW-110-23-L-D; Berg 67996-120H.




Copyright © 2022 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany   Impressum     Privacy Policy
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice. Report Errors
Last generated/modified: 05-Apr-2022