Adaption RH850


The embedded tools company
Debug and Trace Adaptation for RH850




Support
Technical Support
 

Debug and Trace Adaptation for RH850


Debug 14pin Debug AUTO26 Mictor 38-pin Aurora 34-pin Aurora 40-pin Aurora 46-pin

Target Connector 14 pin (Debug only)


Signal

Pin

 Pin

Signal

    
TCK12GND
TRST-34FLMD0
TDO56(FLMD1)
TDI78VCC
TMS910(FLMD2)
RDY-1112GND
RESET-1314GND
    

Note: Signals FLMD1 and FLMD2 are optional. This pin assignment is supported by debug-cables:

Connector Type

  • This is a standard 14 pin double row (two rows of 7 pins) connector (pin to pin spacing: 2.54mm/0.100").
  • If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 23mm/0.9".


Half-Size Adapters for Debuggers



  • 100 mil to 50 mil Adapters
  • Small Footprint for Target Connector






Copyright © 2024 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany   Impressum     Privacy Policy
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice. Report Errors
Last generated/modified: 07-Mar-2024