Debug and Trace Connector for PowerPC440
Debug/Trace Connector for PPC440
There are two possibilities to establish a JTAG/Trace connection.
The first one is the conventional connection up to now.
There are two separate connectors for the JTAG interface and the Trace interface.
In this case the JTAG connector is a 16 pin adapter and the Trace connector is a 20 pin adapter.
The second possibility is the newer common connector. All signals for JTAG and Trace are on one 38 pin Mictor connector.
Connector 16 pin
(All activ LOW signals need a pull-up. (10k recommended))
Trace and Debug Connector
Connector 38 pin
Target Connector Type
Link to Tyco Electronics
Copyright © 2022 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice. Report Errors
Last generated/modified: 31-May-2022