Debug Connector TI C2000/C5000/C6000/C7000 DSP
 Adaptation
The adaptation applies for the following TRACE32® products:
| Order No. | Probe |
|---|
| LA-2759 | JTAG Debugger for C7000 DSP (ICD) |
| LA-7830 | JTAG Debugger for C5500 DSP (ICD) |
| LA-7838 | JTAG Debugger for C6000 DSP (ICD) |
| LA-7847 | JTAG Debugger for C2000 DSP (ICD) |
|
Signal
| Pin
| | Pin
| Signal
|
|---|
| | |  | | |
| VREF-DEBUG | 1 |  |  | 2 | N/C |
| TRST- | 3 | | | 4 | GND |
| TDI | 5 | | | 6 | GND |
| TMS | 7 | | | 8 | GND |
| TCK | 9 | | | 10 | GND |
| RTCK | 11 | | | 12 | GND |
| TDO | 13 | | | 14 | GND |
| RESET- | 15 | | | 16 | GND |
| N/C | 17 | | | 18 | GND |
| N/C | 19 | | | 20 | GND |
| | |  | | |
| Target connector, top-view |
Converter
Lauterbach offers the following converters to adapt to target connectors differing from the pinout shown above:
Converter IDC20A to TI-14/TI-20-Compact Converter IDC20A to TI-14
Target Connector 20 pin: 2.54mm pin dimension
 Target Connector Type
- This is a standard 20 pin double row (two rows of 10 pins) connector (pin to pin spacing: 2.54mm/0.100").
- If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 30.6mm/1.2".
- Examples with housing: Samtec HTST-110-01-L-D (through-hole); Samtec HTST-110-01-L-DV (surface mount).
- Examples without housing: Samtec TSW-110-23-L-D; Berg 67996-120H.
| 
Debug Connector TI C2000/C5000/C6000/C7000 DSP
