Adaptation for AVR32


The embedded tools company
Debugger Adaptation for AVR32
Half-Size Adapter



 

Debugger Adaptation for AVR32


Connector 10 pin


Signal

Pin

 Pin

Signal

    
TCK12GND
TDO34VCC
TMS56RST-
N/C78N/C
TDI910GND
    


Signal recommendations for Mictor 38-pin

  • TDI, TDO, TCK, TMS and RST- should be connected directly to the CPU. Don't connect serial resistors or RC combinations to the lines.
  • All trace signals should also be routed straight from CPU to the Mictor connector.
  • Avoid routing the JTAG signals close to the NEXUS signals.
  • VCC is just a sense input and can be connected directly to target VDD, or optional (recommended) with a serial resistor max. 1kOhm

Target Connector for Debugger Adaptation for AVR8/AVR32

Dimension

Connector Type

  • This is a standard 10 pin double row (two rows of 5 pins) connector (pin to pin spacing: 2.54mm/0.100").
 

Half-Size Adapter


Half-Size Adapters for Debuggers



  • 100 mil to 50 mil Adapters
  • Small Footprint for Target Connector






Copyright © 2024 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany   Impressum     Privacy Policy
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice. Report Errors
Last generated/modified: 07-Mar-2024