Target Adaptation for MIPI-10/-20T Connectors (Arm, Cortex)
 Target Connector Type
The CombiProbe can be used with four different connectors (MIPI-10, MIPI-20D, MIPI-20T, MIPI-34).
| Pins | Samtec Order No | Connector Type |
| 10 | FTSH-105-01-L-DV-K | SMT MICRO HEADER with keying shroud |
| 20 | FTSH-110-01-L-DV-K | SMT MICRO HEADER with keying shroud |
 SAMTEC Connector Dimensions
|
Interface Standard
The CombiProbe supports different interface standards:
| JTAG | IEEE 1149.1 | alternate pin function: TMS, TCK, TDO |
| Compact JTAG | IEEE 1149.7 | alternate pin function: TMSC, TCKC, - |
| Serial Wire Debug | CoreSight ARM | alternate pin function: SWDIO, SWCLK, SWO |
The interface type and corresponding pin function can be selected in the debuggers GUI.
 MIPI-10 connector (debug only; optional: serial wire output)
|
Signal
| Pin
| | Pin
| Signal
|
|---|
| | |  | | |
| VREF-DEBUG | 1 |  |  | 2 | TMS|TMSC|SWDIO |
| GND | 3 | | | 4 | TCK|TCKC|SWCLK |
| GND | 5 | | | 6 | TDO|- |SWO |
| GND (KEY) | 7 |  | | 8 | TDI |
| GND | 9 | | | 10 | RESET- |
| | |  | | |
MIPI-20T connector (debug and trace; optional: serial wire output)
|
Signal
| Pin
| | Pin
| Signal
|
|---|
| | | | | |
| VREF-DEBUG | 1 | | | 2 | TMS|TMSC|SWDIO |
| GND | 3 | | | 4 | TCK|TCKC|SWCLK |
| GND | 5 | | | 6 | TDO|-|SWO |
| GND (KEY) | 7 | | | 8 | TDI |
| GND | 9 | | | 10 | RESET- |
| GND | 11 | | | 12 | TRC CLK |
| GND | 13 | | | 14 | TRC DATA[0] |
| GND | 15 | | | 16 | TRC DATA[1] |
| GND | 17 | | | 18 | TRC DATA[2] |
| GND | 19 | | | 20 | TRC DATA[3] |
| | | | | |
Converter MIPI-20T to IDC20A Converter IDC20A/MIPI-20 to 10-pin ECU14
|
Target Adaptation for MIPI-10/-20T Connectors (Arm, Cortex)
