Conv. Samtec40/COP16 to Samtec46 PowerOrg


The embedded tools company




Support
Technical Support
 

Conv. Samtec40/COP16 to Samtec46 PowerOrg


Product

Order No.Probe
LA-3831Conv. Samtec40/COP16 to Samtec46 PowerOrg 


Target Connector Type

SAMTEC Part NumberDescription
ASP-130368-01Rugged High Speed Socket

Data Sheet
Link to SAMTEC

Target Connector Placement

  • The adaption to the target is a 46 pin Samtec connector (Power.ORG pinout).
We recommend to place the even numbered pins at the PCB border side:
  • The aurora signals (on the odd numbered side) can be easily routed to the processor
  • The flex cable between Aurora preprocessor and target will not be twisted.

Pinout (Power.org HST-S46 compatible)

Signal

Pin

 Pin

Signal

    
TXP012JTAG-VREF
TXN034TCK
GND56TMS
TXP178TDI
TXN1910TDO
GND1112TRST-
TXP21314(VENDOR-IO0)
TXN21516(VENDOR-IO1)
GND1718(VENDOR-IO2)
TXP31920(VENDOR-IO3)
TXN32122PORESET-
GND2324GND
(TXP4)2526(CLKP)
(TXN4)2728(CLKN)
GND2930GND
(TXP5)3132(VENDOR-IO4)
(TXN5)3334(VENDOR-IO5)
GND3536GND
(TXP6)3738N/C
(TXN6)3940N/C
GND4142GND
(TXP7)4344N/C
(TXN7)4546N/C
    
Target connector, top-view, connect the two latch pins to GND

Note:
  • Connect the two latch pins to GND.
  • Signals in brackets are reserved for future use.

Debug Signals

There are three alternatives for connecting the debug signals:
  • The target connects both trace and debug signals to the Samtec connector. As the adapter includes a 16-pin COP header for the debug cable, it can be used for debugging/tracing as well as for JTAG-only debugging.
  • The target has separate connectors for tracing (Samtec46) and debugging (16-pin COP header).
  • The target has separate connectors for tracing and debugging, but the debug signals are connected to both connectors. This solution is often found on evaluation boards because of it's flexibility, but in terms of JTAG signal integrity it is not recommended.
The debug signals are:
  • JTAG-VREF, TCK, TMS, TRST-, TDI, TDO, RESET-.




Copyright © 2024 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany   Impressum     Privacy Policy
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice. Report Errors
Last generated/modified: 07-Mar-2024