Target Adaption AUTO26 to JTAG14 for RH850


The embedded tools company




Support
Technical Support
 

Target Adaption AUTO26 to JTAG14 for RH850


Product

Order No.Probe
LA-2700Conv. AUTO26 to JTAG14 RH850 

Target Connector Type

Connector Type

  • This is a standard 14 pin double row (two rows of seven pins) connector (pin to pin spacing: 2.54mm/0.100").
  • If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 23mm/0.9".

Target Connector Pinout


Signal

Pin

 Pin

Signal

    
TCK12GND
TRST-34FLMD0
TDO56(FLMD1)
TDI78VCC
TMS910(FLMD2)
RDY-1112GND
RESET-1314GND
    


Signals FLMD1 and FLMD2 are optional target signals. On adapter side these pins are not connected.

Compatible Debug Cables

The following debug cables are compatible with this adapter:




Copyright © 2024 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany   Impressum     Privacy Policy
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice. Report Errors
Last generated/modified: 07-Mar-2024