Super10 NEXUS Debugger and Trace


The embedded tools company


Picture
  Highlights
Support for NEXUS standard class 1 to 3+
Easy high-level and assembler debugging
Interface to all compilers
Program and data flow trace up to 200 MHz
Up to 4 GByte trace memory
16...256 MFrame
Trace contents readable while sampling
Code coverage
Performance analysis
Onchip trigger and filter
Interface to all hosts
USB and ETHERNET interface included
Support for Super10 Core in ASIC


Doc
Download full document
nexussuper10.pdf
(645k)
Dim
Modules
Adaptions
Dimensions
Volt
Operation Voltage
FAQ
Frequently Asked Questions
Order
Order
Information
Support
Technical Support



TOP

Nexus Concept




The PowerNexus Module includes all systems for trace and debugging. Controlled by an PowerPC controller with 200 MHz it gives max. performance for fast download and trace upload.

TOP

Controller


CPU

  • 200 MHz PowerPC
  • 64 MByte SDRAM

PODBUS Interface to PC, ETHERNET or TRACE32-ICE

Direct USB Interface

TOP

Active Debugger


High-Speed Download

  • 750 kByte/sec

Variable Debug Clock Speed

  • Variable up to 100 MHz
TOP

Nexus Trace


Nexus Port

  • 16 Trace Channels for 200 MHz Operation

Trace Storage

  • 256/512 MByte Trace Storage
  • 16/32 MFrames
  • 64 M Nexus Frames
  • Full Dual-ported
  • 640 MByte/sec sample rate
  • Time Stamp 20 ns Resolution
  • Time Correlation and Tracking with other TRACE32 Tools

Code Coverage

  • Hardware Code Coverage
  • 4 Segments with 4 MByte each

Data Coverage

  • Hardware Data Coverage
  • 4 Segments with 256 KByte each

Shadow Memory

  • 4 Segments with 256 KByte each

Breakpoints

  • 4 Breakpoint Memory with 256 KBit each

Trigger Sequencer

  • 4 Trigger Levels
    • Goto
    • Continue
  • Trace Control
    • Enable
    • On
    • Off
    • Break
  • 3 Counters
    • Enable
    • On
    • Off
    • Restart
  • 2 Flags
    • On
    • Off
    • Toggle
  • 2 Markers
  • Break
    • Program
    • Trigger Bus
  • 2 Trigger Outputs

Trigger Delay

  • 0 .. 300 s

External Trigger

  • Input from PODBUS
  • Output to PODBUS

Performance Analyzer

Support for EPROM/FLASH Simulator

  • Breakpoints in ROM Area
  • 8, 16 and 32 Bit EPROM/FLASH Emulation
TOP

NEXUS Connector


Adaption for NEXUS Super10

FLEX Adapter
  • Highly Flexible Adapters
  • For Debuggers and ICD Trace
  • High Signal Quality
  • Adapted Impedance
  • MICTOR
  • 100 MIL
  • SAMTEC
  • YAMAICHI

TOP

IDE - Integrated Development Environment






ASM Debugger
  • Supports almost all file formats
  • Assembler source-level debugging
  • Advanced memory display
  • Inline assembler
  • Memory tests
  • Customizable windows
  • Peripheral windows
  • Terminal window
  • Semi-hosting
  • Flash programming
  • Full support for peripherals
High-Level-Language Debugging
  • Supports multiple languages
  • Full support for C++
  • Integrated into TRACE32 environment
  • Supports most compilers and hosts
  • Same user interface on different hosts
  • High speed download
  • Debugs optimized code
  • Display of function nesting
  • Display of linked lists
  • Powerful expression evaluation
Compiler Support

C

  • C166 (ARM Germany GmbH)
    • EOMF-166
  • XC16X/ST10 (Cosmic Software)
    • ELF/DWARF
  • GNU-GCC166 (HighTec EDV-Systeme GmbH)
    • DBX
  • C166 (TASKING)
    • IEEE

C++

  • GNU-CPP166 (HighTec EDV-Systeme GmbH)
    • DBX
  • CP166 (TASKING)
    • IEEE
Logical Display of Periperals
  • Display of onchip peripherals
  • User definable windows
  • Interactive window definition with softkey support
  • Pulldown menues for selection of choices
  • Additional description for each field
Script Language PRACTICE
  • Structured Language
  • Menu Support
  • Command Logs
  • Custom Menues
  • Custom Toolbars and Buttons
  • Custom Dialog Windows
  • 64-Bit Arithmetic
  • Numeric, Logical and String Operators
  • Direct Access to System States
NOR FLASH Programming
  • Internal and/or external NOR FLASH memories
  • All common NOR FLASH types
  • Programming of multiple NOR FLASH devices
  • Provided by debuggers and in-circuit emulators
NAND FLASH Programming
  • Generic and CPU-specific NAND FLASH controllers
  • Support all common NAND FLASH devices
  • Bad block treatment (skipped, reserved block area)
  • ECC generation
SIM Instruction Set Simulators
  • Easy high-level and assembler debugging
  • Interface to all compilers
  • Trace Buffer
  • Powerful script language
  • Software compatible to all TRACE32 tools
  • Hardware simulation
Trace-based Profiling
  • Detailed analysis of function run-times
  • Detailed analysis of task run-times and state
  • Graphical analysis of variable values over the time
  • Analysis of the time interval of a single event (e.g. Interrupt)
  • Analysis of the time interval between 2 defined events
Trace-based Code Coverage
  • Long-Time Hardware Coverage Analysis for Emulator and ETM
  • Trace Based Coverage Analysis for ICD and Emulator
  • Analysis on ASM and HLL
  • Coverage summary on modul/function level
SmartTrace
  • Fills in missing code
  • Direct branch reconstruction
  • Indirect branch reconstuction with CTS
  • Memory and Register values from CTS
Energy Profiling
  • Realtime measurement of 3 current and 4 voltage lines
  • Realtime trigger on current, voltage and power
  • Time correlation with other TRACE32 tracetools
  • Energy statistics on function and task level
  • Fully integrated in the TRACE32 user interface
CTS Trace-based Debugging
  • Allows re-debuggging of a traced program section
  • Provides forward and backward debugging capabilities
  • High-level language trace display including all local variables
  • Timing and function nesting display
  • Has the ability to fill most trace gaps caused by the limited bandwidth of trace port
Logger
  • Software trace of any size stored in an array structure on the target
  • General trace format provided by TRACE32-PowerView
  • Configuration and display commands provided by TRACE32-PowerView
  • Works as trace with address and data information
  • Works as a program flow trace (SH4, PowerPC)
  • Time stamp possible
  • Predefined algorithms to fill the trace provided by Lauterbach
  • User defined algorithms to fill the trace also possible
Snooper
  • Samples memory while application is running
  • Support for special debug communication channels
  • All trace display and analysis functions can be used
  • Trigger on specific values
  • Dynamic performance analysis
RTOS
RTOS Support
3rd Party Integration
3rd Party Tool Integration
Help System
  • Acrobat Based Documentation
  • Fast Text Search
  • Device Specific Filtering
  • Basic and Advanced Help
  • Training Manuals Included
  • WWW Update
TOP

Compatible JTAG Debugger


Super10 Debugger
  • Interface to all compilers in C and C++
  • Unlimited number of software breakpoints
  • Full support for all on-chip breakpoints and trigger features
  • FLASH programming
  • RTOS awareness

TOP

Details and Configurations






Copyright © 2012 Lauterbach GmbH, Altlaufstr.40, D-85635 Höhenkirchen-Siegertsbrunn, Germany  Impressum
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice.
Last generated/modified: 1-Feb-2012