In-Circuit Emulator for 68HC05 and 68HC08 The embedded tools company
ICE 08 BASE


In-Circuit Emulator for 68HC05 and 68HC08

MC68HC05B16 MC68HC05B32 MC68HC05C MC68HC05D MC68HC05X MC68HC08AB MC68HC08AS MC68HC08AT MC68HC08AZ MC68HC08AZ0 MC68HC08GP MC68HC08XL36 MC68HC705-X32
Picture
  Highlights
Works with Cosmic, Metrowerks, Tasking and other compilers
Up to 8MHz bus speed
Support for 5V and 3.3V
Dummy cycle blank-out in trace
On chip EEPROM access
Dual ported-memory
Windows9x, NT and X windows interface
 
  Introduction
TRACE32-ICE08 supports most members of the 68HC05 and 68HC08 family from Motorola. The modular and open technology of the system allows the fast integration of new chip designs.

TRACE32-ICE is a state of the art In-Circuit Emulator, which offers unlimited hardware breakpoints and up to 16MByte dual-ported emulation memory. The real-time trace and trigger work up to the max. speed of the CPU. The analyzer offers selective trace as well as performance analysis and statistic functions.

The system offers an interface to all C compilers.

TRACE32 works with the highest variety of host interfaces. The communication link to the host is done by the printer port, a fibre optic interface or ethernet allowing a high-speed transfer.

TRACE32-ICE08 is also available as a compact 8-bit In-Circuit Emulator.


Link Doc
Download full document
ice08.pdf
(524k)		 Dim
Modules
Adaptions
Dimensions		 Freq
Max. Operation Frequency		 Volt
Operation Voltage		 FAQ
Frequently Asked Questions		 Order
Order
Information		 Support
Technical Support

Demo Software for Download



TOP       ICE 08 BASE

The ICE 08 probe is a high-performance emulation system for many derivates of the 68HC08 and the 68HC05 family. The change between different CPU types is done by changing the adapter board. The probe supports high-speed emulation. It runs together with the 8 bit controller ECC8 or the 32 bit controller ECU32.

Operating Modes

  • Reset Down
  • Reset Up
  • Alone Internal
  • Alone External
  • Emulation Internal
  • Emulation External

Max. Operation Frequency

  • 10 MHz Bus Clock

Emulation Mode

  • Single-Chip

Multitask Debugging

  • 1 foreground task
  • 1 background task

Trace Control

  • TraceReset
  • TraceWait
  • TraceAll
By default no prefetch or idle cycles are traced

Voltage and Clock Monitors for the Target System

  • 3.3 ... 5V Operation
  • Clock monitor may be swichted off

Exception Control

  • Static Exception Setting
  • Reset
  • Target Exception Control
  • Reset
  • IRQ1
  • IRQ2
  • Exception Trigger
  • Reset
  • IRQ1
  • IRQ2
  • Simulation
  • Exception Simulation
  • Reset
  • IRQ1
  • IRQ2




Copyright © 2002 Lauterbach GmbH, Altlaufstr.40, D-85635 Höhenkirchen-Siegertsbrunn, Germany  Impressum
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice.
Last generated/modified: Jun-3-2002