FIRE Portanalyzer

The embedded tools company
Port Analyzer for FIRE

FIRE Portanalyzer
32 Channels Ports Selective
Up to 1024 Ports in MUX Mode
32 Channels External
50/100 MHz Timing
100 MHz Cycle State
100 MHz Clock State
64K or 256K Trace Depth
Slave Operation to State Analyzer
Time Stamp
List and Timing Display
The port analyzer is a special analyzer tool with 64 channels for sampling peripheral ports on the emulation chip. It can run in state mode together with the state analyzer (100 MHz) or separately with up to 50/100 MHz sampling rate as a timing analyzer system. By doing transient recording peripheral signals can be traced for a long time period.

Download full document
( 292k)
Technical Support


Port Analyzer for FIRE

32 Additional Trace Channels on Ports

  • 32 Channels
  • Every channel can trace one port
  • Free selectable out of 1024
  • 1024 Channels in MUX Mode

32 Additional Trace Channels on External Inputs

  • 32 Channels in Normal Mode
  • 16 Channels in Latch Mode
  • 16 Channels in 100 MHz Timing Mode

1024 Channel Input Multiplexer for Ports

  • Switches selected port to universal counter
  • Max. 10 MHz for pulse width measurement
  • Max. 100 MHz for frequency measurement

32 Channel Input Multiplexer for External Inputs

  • Switches selected ports to universal counter
  • Max. 10 MHz

3 Operation Modes

  • Cycle Trace
  • Clock Trace
  • Timing

Sampling Rate (Timing)

  • 50/100 MHz ... 250 kHz (1-2-5) 250 ms max. record time
  • Transient Mode 5h max record time

Trace Storage

  • 64K State
  • 64K/256K Transients in Timing Mode

State Trigger

  • High, Low, Rising and Falling Edge, Don't Care on every input (32 Bit)

Asynchr. Trigger

  • High, Low, Don't Care on 8 Inputs for Data
  • High, Low, Don't Care on 8 Inputs for Clock
  • Trigger on Data Comparator
  • Trigger on Clock Comparator
  • Synchronous Trigger
  • Trigger on Puls Width (Lower, Higher)
  • Trigger on Glitch
  • Event Delay Trigger
  • Event Relation Trigger

Programmable Trigger Delay

  • 0.2us ... 100s

Time Stamp

  • Resolution 20ns within 300 days

List Display

Timing Display

Frame Display

State Display

Complex Search and Compare Functions

Load and Save Function

Time Correlation to State and Timing Analyzer

Reference Marks and Time Measurement

Signal Analysis with Universal Counter

  • Frequency
  • Period
  • Pulse width
  • Event count
  • Event profile
  • Event trigger

Protocol Support for CAN, USB, etc.

Copyright © 2016 Lauterbach GmbH, Altlaufstr.40, D-85635 Höhenkirchen-Siegertsbrunn, Germany  Impressum
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice. Report Errors
Last generated/modified: 13-Dec-2016