FAQ for ICE-80 The embedded tools company
Z84C11/C13/C15 Emulation (Z80C15)

home Documents FAQ FAQ for ICE-80



PDF document ( 7KB / Mar-3-2008 )


FAQ for ICE-80

TOP       Z84C11/C13/C15 Emulation (Z80C15)
How must a Z84C15 target be prepared for the emulation, using a Z80 emulator?
 
To run the emulation mode on the target CPU, the EV pin must be tied to "high". The TRACE32 Z80 emulation probes of the Z84C11/C13/15 emulators, drive the EV pin with a 100 Ohm resistor. On the target, it is recommended to connect the EV pin via a 1 kOhm resistor to ground.



Navigation
Copyright © 2008 Lauterbach Datentechnik GmbH, Fichtenstr. 27, D-85649 Hofolding, Germany  Impressum
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice.
Last generated/modified: Jul-15-2008