Adaption for ZSP


The embedded tools company
Debugger Adaption for ZSP
Target Connector for ZSP
Half-Size Adapters




Support
Technical Support
TOP

Debugger Adaption for ZSP


Connector 20 pin


Signal

Pin

 Pin

Signal

    
VTREF12N/C
TRST-34GND
TDI56GND
TMS78GND
TCK910GND
N/C1112GND
TDO1314GND
SRTS-1516GND
N/C1718GND
N/C1920GND
    

TOP

Target Connector for ZSP


Dimension

Connector Type

  • This is a standard 20 pin double row (two rows of 10 pins) connector (pin to pin spacing: 2.54mm/0.100").
  • If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 30.6mm/1.2".

Connector 16 pin (obsolete)


Signal

Pin

 Pin

Signal

    
TDO12GND
TDI34TRST-
N/C56VDD
TCK78N/C
TMS910N/C
N/C1112N/C
HRESET-1314N/C
N/C1516GND
    

This is a standard 16 pin double row (two rows of eight pins) connector (pin to pin spacing: 0.100 in.)
NOTE: This pinout was used with older ZSP400 boards and was superseded by the 20pin ARM-compatible pinout (see above). In case you need a connector with the old pinout please contact Lauterbach support.
TOP

Half-Size Adapters


Half-Size Adapters for Debuggers



  • 100 mil to 50 mil Adapters
  • Small Footprint for Target Connector






Copyright © 2016 Lauterbach GmbH, Altlaufstr.40, D-85635 Höhenkirchen-Siegertsbrunn, Germany  Impressum
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice. Report Errors
Last generated/modified: 1-Aug-2016