Adaption for NEXUS MAC 71xx/72xx The embedded tools company


Adaption for NEXUS MAC 71xx/72xx



Link Support
Technical Support
[catalog.tycoelectronics.com]  AMP Connector Dimensions




TOP       Connector

Order No

    AMP part numbers for suitable receptacles (for target)

    AMP 2-767004-2
    AMP 767054-1 (suggested by Motorola)
    AMP 767061-1
    AMP 767044-1 : Board-to-Board Type: Coplanar

    Tyco Electronics

TOP       Adaption for NEXUS on MAC



NEXUS MAC Connector pin-out


Debugger Combined Target Connector
Signal

Pin

 Pin

Signal

    
N/C12N/C
N/C34N/C
VENDEF056CLKOUT
VENDEF278VENDEF3
RSTIN-910EVTI-
TDO1112VTREF
VENDEF41314RDY-
TCK1516MDO07
TMS1718MDO06
TDI1920MDO05
TRST-2122MDO04
VENDEF12324MDO03
TOOLIO32526MDO02
TOOLIO22728MDO01
TOOLIO12930MDO00
N/C3132EVTO-
N/C3334MCKO
TOOLIO03536MSEO1-
N/C3738MSEO0-
    
Connect Pin 39,40,41,42 and 43 to GND


The following pins are connected but not used ...

... by the MC71xx debugger:
5,6,7,8,13,16,18,20,22,23,24,25,26,27,29,36

... by the MC72xx debugger:
5,6,7,8,13,23,24,25,26,27,29,36

Depending on the device, pin 36 (MSEO1) is not supported by the MCU.

Leave these pins open on the target.






Navigation
Copyright © 2008 Lauterbach Datentechnik GmbH, Fichtenstr. 27, D-85649 Hofolding, Germany  Impressum
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice.
Last generated/modified: Jan-18-2008