Adaption for NEXUS Debugger on GA51 (Robust)

The embedded tools company
Adaption for NEXUS (GlenAir 51 Pin Robust)

Adaption for NEXUS Debugger on GA51 (Robust)
Robust Connector
Glenair MR7580-51P2BNU

Link Support
Technical Support
[]  Glenair Product Page


Adaption for NEXUS (GlenAir 51 Pin Robust)

51-pin Robust MR7580-51P2BNU

The following signals of the 50 pin connector are not used by the debugger:

UBATT pin 1
UBAT pin 2
VSTBY pin 3
TOOLIO0 pin 4
TOOLIO1 pin 5
TOOLIO2 pin 6
MDI2 pin 45
MDI3 pin 47
PORT0 pin 51
The following signals are used by the debugger, but have a special meaning:

VEN_IO pins can be left open or tied to VREF via 10KOhm
/MSEO1 pin 35 must be tied to 1 or leave open.
( 1 means VREF )
Place the connector as close as possible to the CPU. Refer also to AN2002/D by Motorola.

Copyright © 2016 Lauterbach GmbH, Altlaufstr.40, D-85635 Höhenkirchen-Siegertsbrunn, Germany  Impressum
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice. Report Errors
Last generated/modified: 13-Dec-2016