Adaption for NEXUS Debugger on AMP50 (Non Robust)
The embedded tools company
Adaption for NEXUS (AMP 50 Pin Non Robust)
home > Products  > •  > •  > NEXUS  > MPC56x NEXUS 


Picture
  Highlights
Low-Cost Connector
AMP 104549-7 50-pin


Link Support
Technical Support
[www.tycoelectronics.com]  AMP Connector Dimensions



TOP

Adaption for NEXUS (AMP 50 Pin Non Robust)




    104549-7 50-pin with PCB Retention


    The following signals of the 50 pin connector are not used by the debugger:
    (blue colored)
    		 UBATT pin 1
    UBAT pin 2
    VSTBY pin 3
    TOOLIO0 pin 4
    TOOLIO1 pin 5
    TOOLIO2 pin 6
    MDI2 pin 45
    MDI3 pin 47
    The following signals are used by the debugger, but have a special meaning:
    (orange colored)
    		 VEN_IO pins can be left open or tied to VREF via 10KOhm
    /MSEO1 pin 35 Must be tied to 1 .
    ( 1 means VREF )
    Place the connector as close as possible to the CPU. Refer also to AN2002/D by Motorola.






Copyright © 2010 Lauterbach GmbH, Altlaufstr.40, D-85635 Höhenkirchen-Siegertsbrunn, Germany  Impressum
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice.
Last generated/modified: 25-Jan-2010