Adaption for MSP430 family

Debugger Connector for MSP430

Connector 14 pin

Signal	Pin		Pin	Signal
TDO|SBWTDIO RST	1		2	N/C
TDI TCLK	3		4	VTREF
TMS	5		6	N/C
TCK|TEST SBWTCK	7		8	TEST
GND	9		10	N/C
RST	11		12	N/C
N/C	13		14	NC

Target Connector for Debugger Adaption for MSP430

Dimension

Connector Type

• This is a standard 14 pin double row (two rows of 7 pins) connector (pin to pin spacing: 2.54mm/0.100").
• If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 23mm/0.9".

Half-Size Adapters

Half-Size Adapters for Debuggers

100 mil to 50 mil Adapters Small Footprint for Target Connector