Adaption for CEVA-X


The embedded tools company
Debugger Adaption for CEVA-X
Target Connector for CEVA-X
Half-Size Adapters




Support
Technical Support
TOP

Debugger Adaption for CEVA-X


Connector 20 pin


Signal

Pin

 Pin

Signal

    
VREF-DEBUG12VSUPPLY (not used)
TRST-34GND
TDI56GND
TMS|TMSC|SWDIO78GND
TCK|TCKC|SWCLK910GND
RTCK1112GND
TDO1314GND
RESET-1516GND
DBGRQ1718GND
DBGACK1920GND
    
  • Pins 17 and 19 are not used.

TOP

Target Connector for CEVA-X


Dimension

Connector Type

  • This is a standard 20 pin double row (two rows of 10 pins) connector (pin to pin spacing: 2.54mm/0.100").
  • If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 30.6mm/1.2".
TOP

Half-Size Adapters


Half-Size Adapters for Debuggers



  • 100 mil to 50 mil Adapters
  • Small Footprint for Target Connector






Copyright © 2016 Lauterbach GmbH, Altlaufstr.40, D-85635 Höhenkirchen-Siegertsbrunn, Germany  Impressum
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice. Report Errors
Last generated/modified: 1-Aug-2016