Adaption for ARM and XSCALE

Debugger Adaption for ARM and XSCALE

Connector 20 pin (recommended for new designs)

Signal	Pin		Pin	Signal
VTREF	1		2	VSUPPLY (not used)
TRST-	3		4	GND
TDI	5		6	GND
TMS	7		8	GND
TCK	9		10	GND
RTCK	11		12	GND
TDO	13		14	GND
SRST-	15		16	GND
DBGRQ	17		18	GND
DBGACK	19		20	GND

Target Connector for Debugger Adaption for ARM and XSCALE 20 pin

Dimension

Connector Type

• This is a standard 20 pin double row (two rows of 10 pins) connector (pin to pin spacing: 2.54mm/0.100").
• If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 30.6mm/1.2".

Connector 14 pin

Signal	Pin		Pin	Signal
VCCS	1		2	GND
TRST-	3		4	GND
TDI	5		6	GND
TMS	7		8	GND
TCK	9		10	GND
TDO	11		12	SRST-
VTREF	13		14	GND

Connector for TI derivatives

Signal	Pin		Pin	Signal
TMS	1		2	TRST-
TDI	3		4	GND
VTREF	5		6	GND (KEY)
TDO	7		8	GND
RTCK	9		10	GND
TCK	11		12	GND
EMU0	13		14	EMU1

Target Connector for Debugger Adaption for ARM and XSCALE 14 pin

Dimension

Connector Type

• This is a standard 14 pin double row (two rows of 7 pins) connector (pin to pin spacing: 2.54mm/0.100").
• If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 23mm/0.9".

MIPI Connectors

MIPI Connectors for the ARM Architecture

Half-Size Adapters

Half-Size Adapters for Debuggers

• 100 mil to 50 mil Adapters
• Small Footprint for Target Connector