BDM Connector for ColdFire+/V1


The embedded tools company
Debugger Connector
Target Connector Type and Dimension




Support
Technical Support
 

Debugger Connector


Product

Order No.Probe
LA-3746BDM Debugger for ColdFire+/V1 (ICD) 

Connector for BDM Debugger for ColdFire+/V1


Signal

Pin

 Pin

Signal

    
BKGD12GND
N/C34RESET-
N/C56VCC
    

The signal VCC on pin six is used to sense if the target has power and to adjust the output drivers to the target's voltage level.  

Target Connector Type and Dimension


Dimension

Connector Type

  • This is a standard 6 pin double row (two rows of 3 pins) connector (pin to pin spacing: 2.54mm/0.100").
  • If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 12.5mm/0.5".




Copyright © 2024 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany   Impressum     Privacy Policy
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice. Report Errors
Last generated/modified: 07-Mar-2024