 |
|
Processor Specific Adaptions
|
|
Description |
HTML |
PDF |
|---|
| |
| CombiProbe Connectors for the MIPS Architecture
CombiProbe Connectors for the MIPS Architecture
|  AD COB-MIPS | |
| |
| MIPI Connectors for XGOLD
Pinout and signal recommendations for the MIPI (Trace and JTAG) connector for XGOLD, XGOLD102 (PMB7890) and XGOLD110 (PMB7900)
| AD MIPI-XGOLD | |
| |
| ETMv1 Conv. Mictor-38, 2x MIPI-34 to MIPI-60
ARM Converter to connect an ARM Preprocessor with one Mictor-38 for 16-bit ETMv1 and two CombiProbes for two 4-bit system trace ports to a MIPI-60 connector on the target.
| AD-1-MIPI34-SAMTEC60 | |
| |
| Converter 2x Mictor-38 to MIPI-60
Converter to connect an ARM Preprocessor to a MIPI-60 on the target. Suitable for up to 16-bit ETMv3.
| AD-2XMICTOR-MIPI60 | |
| |
| ETMv3 Conv. Mictor-38, 2x MIPI-34 to MIPI-60
ARM Converter to connect an ARM Preprocessor with one Mictor-38 for 16-bit ETMv3 and two CombiProbes for two 4-bit system trace ports to a MIPI-60 connector on the target.
| AD-3-MIPI34-SAMTEC60 | |
| |
| Adaption for DSP56K
| AD-56300 | |
| |
| Debug and Trace Adaption for CPU32 and ColdFire
Pinassignment of Debug and Trace Adapter for CPU32 and ColdFire. Typical for 68332 or 68340
| AD-68k | |
| |
| Adaption for Renesas Electronics (NEC) 78K0R / RL78 Debugger
Lauterbach Debugger is connected to Renesas (NEC) 78K0R / RL78 target via a 16 pin double row connector.
| AD-78K0R | |
| |
| Adaption for ARM-20 Debug Cable for APS Debugger
Specification of the debug connector on an APS based target board.
| AD-APS-20 | |
| |
| Adaption for ARC
Pin description of JTAG connector for ARC debugger
| AD-ARC | |
| |
| Adaption for ARM CombiProbe
Specifiction of the debug and trace connector suitable for the CombiProbe on an ARM or XScale based target.
| AD-ARM-COMBIPROBE | |
| ETMv1 Conv. Mictor-38, 2x MIPI-34 to MIPI-60
ARM Converter to connect an ARM Preprocessor with one Mictor-38 for 16-bit ETMv1 and two CombiProbes for two 4-bit system trace ports to a MIPI-60 connector on the target.
|  AD-1-MIPI34-SAMTEC60 | |
| ETMv3 Conv. Mictor-38, 2x MIPI-34 to MIPI-60
ARM Converter to connect an ARM Preprocessor with one Mictor-38 for 16-bit ETMv3 and two CombiProbes for two 4-bit system trace ports to a MIPI-60 connector on the target.
| AD-3-MIPI34-SAMTEC60 | |
| ARM Converter MIPI-34 to ARM-20 or TI-14
Converter to connect the CombiProbe to an ARM-20 connector specified by ARM or to a TI-14 connector specified by Texas Instruments. Converts to Debug Cable connector.
| AD-MIPI34-ARM20-TI14 | |
| Converter MIPI-34 to TI-20-Compact
Converter to connect the CombiProbe to a connector specified by Texas Instruments (TI) which is used on a few targets with TI processors.
| AD-ARM-MIPI34-TI20 | |
| Converter MIPI-34 to MIPI-60
Converter to connect the CombiProbe to a MIPI-60 connector on the target.
| AD-MIPI34-MIPI60 | |
| Converter MIPI-34 to SD or Micro SD Socket
Converter to connect the CombiProbe to a SD or Micro SD card connector in case the signals alternatively provide debug functionality.
| AD-ARM-MIPI34-SD | |
| DB8500 Conv. 2x Mictor38, 3x MIPI34 to MIPI60
Converter to connect an ARM Preprocessor (up to 24-bit PTM/ETMv3) and up to three CombiProbes (3x STM/STP) to a MIPI-60 connector on the target.
| AD-MIPI-STN8500 | |
| OMAP4 Conv. 2xMictor, ARM20, MIPI34 to MIPI60
Converter to connect an ARM Preprocessor (up to 18-bit PTM) and one CombiProbe (STM; two connection options) or a Debug Cable to a MIPI-60 connector on the target.
| AD-OMAP4XXX-MIPI60 | |
| OMAP3 Conv. Mictor-38, MIPI-34 to Mictor-38
Converter to connect an ARM Preprocessor and a CombiProbe to a Mictor connector on the target.
| AD-OMAP35XX-MIPI34 | |
| ETMv3 Conv. Mictor-38, MIPI-34 to MIPI-60
ARM Converter to connect an ARM Preprocessor with one Mictor-38 for 16-bit ETMv3 and one CombiProbe for a 4-bit system trace port to a MIPI-60 connector on the target.
| CON-ETM3-MIPI34SAM60 | |
| |
| ARM Converter 2x Mictor-38, ARM-20 to MIPI-60
Converter to connect an ARM ETM Preprocessor with one or two Mictor-38 connectors (32-bit ETMv3) and an ARM Debug Cable to a MIPI-60 connector on the target.
| AD-ARM-CON-MIPI60-1 | |
| |
| Adaption for ARM Debug Cable
Specification of the debug connector suitable for the Debug Cable on an ARM or XScale based target.
| AD-ARM-DEBUGCABLE | |
| ARM Converter ARM-20 to Mictor-38
Converter to connect the ARM Debug Cable to a Mictor connector on the target providing both debug and trace signals.
| AD-JTAG20-MICTOR38 | |
| ARM Converter 2x ARM-20 to ARM-20
Converter to connect two ARM Debug Cable to one connector on the target.
| AD-ARM20-ARM20 | |
| ARM Converter ARM-20 to MIPI-10/20/34
Converter to connect a Debug Cable to 10/20/34 pin connectors specified by MIPI.
| AD-COB-ARM-MIPI | |
| Converter ARM-20 to TI-14 or TI-20-Compact
Converter to connect a Debug Cable to a TI-14 or TI-20-Compact connector which is used on many targets with processors from Texas Instruments.
| AD-ARM-TI-TI20-TI14 | |
| ARM Converter ARM-20 to/from ARM-14
Converter to connect an ARM Debug Cable V1 (ARM-14) to ARM-20 or to connect a newer ARM Debug Cable (ARM-20) to ARM-14 target connector.
| AD-ARM20-ARM14 | |
| Converter ARM-20 to TI-14
Converter to connect a Debug Cable to a TI-14 connector which is used on many targets with processors from Texas Instruments.
| AD-ARM-TI-TI14 | |
| |
| Adaption for ARM ETM Preprocessor HSSTP
Standard adaption for High Speed Serial Trace Port (ARM,ETM, HSSTP)
| AD-ARM-ETM-HSSTP | |
| |
| Adaption for ARM ETM Preprocessor Mictor
| AD-ARM-ETM-MICTOR | |
| ETMv1 Conv. Mictor-38, 2x MIPI-34 to MIPI-60
ARM Converter to connect an ARM Preprocessor with one Mictor-38 for 16-bit ETMv1 and two CombiProbes for two 4-bit system trace ports to a MIPI-60 connector on the target.
| AD-1-MIPI34-SAMTEC60 | |
| ETMv3 Conv. Mictor-38, 2x MIPI-34 to MIPI-60
ARM Converter to connect an ARM Preprocessor with one Mictor-38 for 16-bit ETMv3 and two CombiProbes for two 4-bit system trace ports to a MIPI-60 connector on the target.
| AD-3-MIPI34-SAMTEC60 | |
| Converter Mictor-38 to MIPI-20/34
Converter to connect an ARM Preprocessor to a 20 pin connector specified by MIPI and CoreSight.
| AD-ARM-MICTOR-MIPI | |
| DB8500 Conv. 2x Mictor38, 3x MIPI34 to MIPI60
Converter to connect an ARM Preprocessor (up to 24-bit PTM/ETMv3) and up to three CombiProbes (3x STM/STP) to a MIPI-60 connector on the target.
| AD-MIPI-STN8500 | |
| OMAP4 Conv. 2xMictor, ARM20, MIPI34 to MIPI60
Converter to connect an ARM Preprocessor (up to 18-bit PTM) and one CombiProbe (STM; two connection options) or a Debug Cable to a MIPI-60 connector on the target.
| AD-OMAP4XXX-MIPI60 | |
| OMAP3 Conv. Mictor-38, MIPI-34 to Mictor-38
Converter to connect an ARM Preprocessor and a CombiProbe to a Mictor connector on the target.
| AD-OMAP35XX-MIPI34 | |
| ETMv3 Conv. Mictor-38, MIPI-34 to MIPI-60
ARM Converter to connect an ARM Preprocessor with one Mictor-38 for 16-bit ETMv3 and one CombiProbe for a 4-bit system trace port to a MIPI-60 connector on the target.
| CON-ETM3-MIPI34SAM60 | |
| Converter 2x Mictor-38 to MIPI-60
Converter to connect an ARM Preprocessor to a MIPI-60 on the target. Suitable for up to 16-bit ETMv3.
| AD-2XMICTOR-MIPI60 | |
| Converter MIPI-60 to Mictor-38 (ETMv3 Pinout)
Converter to connect a Preprocessor with MIPI-60 connector to a Mictor-38 connector on the target assuming an ETMv3 pinout up to 16 bit.
| AD-MIPI60-MICTOR | |
| ARM Converter 2x Mictor-38, ARM-20 to MIPI-60
Converter to connect an ARM ETM Preprocessor with one or two Mictor-38 connectors (32-bit ETMv3) and an ARM Debug Cable to a MIPI-60 connector on the target.
| AD-ARM-CON-MIPI60-1 | |
| |
| Adaption for CEVA-X Preprocessor
| AD-ARM-ETM-MICTOR | |
| |
| Adaption for TeakLite-III Preprocessor
| AD-ARM-ETM-MICTOR | |
| |
| Adaption for ARM ETM Preprocessor MIPI-60
| AD-ARM-ETM-MIPI60 | |
| |
| Converter Mictor-38 to MIPI-20/34
Converter to connect an ARM Preprocessor to a 20 pin connector specified by MIPI and CoreSight.
| AD-ARM-MICTOR-MIPI | |
| |
| Converter MIPI-34 to SD or Micro SD Socket
Converter to connect the CombiProbe to a SD or Micro SD card connector in case the signals alternatively provide debug functionality.
| AD-ARM-MIPI34-SD | |
| |
| Converter MIPI-34 to TI-20-Compact
Converter to connect the CombiProbe to a connector specified by Texas Instruments (TI) which is used on a few targets with TI processors.
| AD-ARM-MIPI34-TI20 | |
| |
| Conv. Samtec40 PPC-QorIQ HSTP to Samtec70 PowerOrg
Adaption for High-Speed serial trace probe for QorIQ P40XX with 70pin Power.Org-connector
| AD-ARM-STP-QORIQ | |
| |
| Conv. Samtec40 PPC-QorIQ HSTP to Samtec46 PowerOrg
| AD-ARM-STP-QORIQ | |
| |
| Conv. Samtec40 PPC-QorIQ HSTP to Samtec22 PowerOrg
| AD-ARM-STP-QORIQ | |
| |
| Conv. Samtec40 PPC-QorIQ HSSTP to Samtec34 PowerOrg
| AD-ARM-STP-QORIQ | |
| |
| Converter ARM-20 to TI-14
Converter to connect a Debug Cable to a TI-14 connector which is used on many targets with processors from Texas Instruments.
| AD-ARM-TI-TI14 | |
| |
| Converter ARM-20 to TI-14 or TI-20-Compact
Converter to connect a Debug Cable to a TI-14 or TI-20-Compact connector which is used on many targets with processors from Texas Instruments.
| AD-ARM-TI-TI20-TI14 | |
| |
| ARM Converter ARM-20 to/from ARM-14
Converter to connect an ARM Debug Cable V1 (ARM-14) to ARM-20 or to connect a newer ARM Debug Cable (ARM-20) to ARM-14 target connector.
| AD-ARM20-ARM14 | |
| |
| ARM Converter 2x ARM-20 to ARM-20
Converter to connect two ARM Debug Cable to one connector on the target.
| AD-ARM20-ARM20 | |
| |
| Debugger Adaption for Intel® Atom™/x86
Pinout of XDP debug connector for ATOM architecture. Adapters for other debug connectors.
| AD-ATOM | |
| |
| Debugger Adaption for Intel® Atom™/x86
Pinout of XDP debug connector for ATOM architecture. Adapters for other debug connectors.
| AD-ATOM | |
| |
| Converter Intel® Atom™ Debugger to Hirose31
Converter from 60 pin XDP (Samtec) connector on JTAG Debugger for Atom (LA-3776) to 31 pin XDP-SSA (Hirose) connector.
| AD-ATOM-HIROSE31-XDP | |
| |
| Conv. Atom™ Multiple Connectors to XDP60
Converter from MIPI34 connector on CombiProbe for Atom.
| AD-ATOM-MULTIPLE-XDP | |
| |
| Converter Intel® Atom™ MIPI34 to 60 pin XDP
Converter Intel® Atom™ MIPI34 to 60 pin XDP (Samtec) connector
| AD-ATOM-SAMTEC60-XDP | |
| |
| Adaption for SH4
Pinassignment of Debug and Trace Adapter for Renesas SHx Family like SH7751
| AD-AUD | |
| |
| Adaption for H8S
Pinassignment of Debug and Trace Adaption for Renesas H8S Family.
| AD-AUD | |
| |
| BDM Debug-Interface Connector for MPC500/800
| AD-BDM-500-800 | |
| |
| BDM Connector for HCS08
| AD-BDM08 | |
| |
| BDM Connector for S12X
| AD-BDM12 | |
| |
| Adaption for Beyond Debugger
Specification of the debug connector suitable for the Debug Cable on a Beyond core based target.
| AD-BEYOND-20 | |
| |
| Adaption for Beyond Debugger
Specification of the debug connector suitable for the Debug Cable on a Beyond core based target.
| AD-BEYOND-20 | |
| |
| Adaption for Blackfin
JTAG Adaptation for Blackfin
| AD-BLACKFIN | |
| |
| Adaption for C166CBC/C166V2 Debugger via OCDS
Pinout and signal recommendations for the JTAG debug connector for TRICORE C166CBC and C166V2 CPUs via OCDS
| AD-CBC | |
| |
| Adaption for CEVA-X
| AD-CEVAX | |
| |
| ARM Converter ARM-20 to MIPI-10/20/34
Converter to connect a Debug Cable to 10/20/34 pin connectors specified by MIPI.
| AD-COB-ARM-MIPI | |
| |
| Adaption for ColdFire Debugger and Trace
| AD-COLDFIRE | |
| |
| Converter MIPI-34 to C166-16
| AD-CON-MIPI34toC166 | |
| |
| Adaption for ESICON (LA-7959)
Logicanalyzer adaptor to trace the bussignals of an EPROM simulator. Requires two Mictor Probes or three Standard Probes
| AD-ESICON | |
| |
| Adaption for Excalibur (ALTERA)
| AD-Excalibur | |
| |
| Adaption for ST10F280
Pinout and signal recommendations for ST10F280 and ST10F296 for the Lauterbach FIRE ST10 emulator
| AD-F280 |  adf280.pdf |
| |
| Adaption for FADS8260 (Local Bus)
| AD-FADS8260 | |
| |
| Adaption for FADS8260
Adaption for FADS8260 (60x Bus)
| AD-FADS8260 | |
| |
| Adaption for FADS8266
Adaption for FADS8266 (60x Bus)
| AD-FADS8266 | |
| |
| Adaption for FADS8280
Adaption for FADS8280 (60x Bus)
| AD-FADS8280 | |
| |
| Adaption for FADS8280 (Local Bus)
| AD-FADS8280 | |
| |
| Adaptions for PowerIntegrator
| AD-FADS82XX | |
| |
| Adaption JTAG Debugger for MPC82xx/MPC83xx(ICD)
| AD-JTAG-MPC82XX-MPC83XX | |
| |
| Conv. 14 Pin JTAG to Mictor38 for MPC55xx
| AD-JTAG14-MICTOR38-MPC55x | |
| |
| ARM Converter ARM-20 to Mictor-38
Converter to connect the ARM Debug Cable to a Mictor connector on the target providing both debug and trace signals.
| AD-JTAG20-MICTOR38 | |
| |
| Debugger and Trace Connectors for PowerPC400
Debugger and Trace Connectors for PPC401/403/405 and IOP480
| AD-JTAG400 | |
| |
| JTAG Connector for PowerPC440
JTAG/COP Connector for PPC440
| AD-JTAG440 | |
| |
| JTAG/COP Connector for PPC603/740/750/8240/8260...
Pinout and signal recommendations for the COP debug connector for PPC750xx, PPC603x, MPC603x, MPC82xx, MPC83XX, MPC74xx, MPC86XX, MPC5200, MPC512x and PA6T
| AD-JTAG603 | |
| |
| JTAG/COP Connector for PowerQuiccIII
JTAG/COP Connector and signal recommendations for for MPC85xx and QorIQ
| AD-JTAGPQ3 | |
| |
| Adaption for M32R
| AD-M32R | |
| |
| Adaption for AVR32
| AD-MAVR32 | |
| |
| Adaption for M-CORE ONCE Connector
| AD-MCORE | |
| |
| Adaption for MicroBlaze
| AD-MICROBLAZE | |
| |
| Mictor-Mictor-JTAG 16pin Converter for PPC4xx
| AD-MICTOR-JTAG16-PPC4xx | |
| |
| Conv. 38 Pin Mictor to 20 for Preproc. PPC4xx
| AD-MICTOR38-PPC4xx | |
| |
| DB8500 Conv. 2x Mictor38, 3x MIPI34 to MIPI60
Converter to connect an ARM Preprocessor (up to 24-bit PTM/ETMv3) and up to three CombiProbes (3x STM/STP) to a MIPI-60 connector on the target.
| AD-MIPI-STN8500 | |
| |
| ARM Converter MIPI-34 to ARM-20 or TI-14
Converter to connect the CombiProbe to an ARM-20 connector specified by ARM or to a TI-14 connector specified by Texas Instruments. Converts to Debug Cable connector.
| AD-MIPI34-ARM20-TI14 | |
| |
| Converter MIPI-34 to MIPI-60
Converter to connect the CombiProbe to a MIPI-60 connector on the target.
| AD-MIPI34-MIPI60 | |
| |
| Converter MIPI-60 to Mictor-38 (ETMv3 Pinout)
Converter to connect a Preprocessor with MIPI-60 connector to a Mictor-38 connector on the target assuming an ETMv3 pinout up to 16 bit.
| AD-MIPI60-MICTOR | |
| |
| Adaption for MIPS
| AD-MIPS | |
| |
| Adaption for MMDSP
| AD-MMDSP | |
| |
| JTAG Connector for MPC5500
Pinout and signal recommendations for the OnCE debug connector for MPC55XX/MPC56xx and SPC56XX.
| AD-MPC5500 | |
| |
| Adaption for MPC7457 ValisX3
| AD-MPC7457VALISX3 | |
| |
| Adaption for MSP430 family
| AD-MSP430 | |
| |
| Adaption for NEXUS AVR32
| AD-NEXUS-AVR32 | |
| |
| NEXUS Debug/Trace for AVR32 AutoFocus
| AD-NEXUS-AVR32 | |
| |
| Adaption for NEXUS Debugger on ETAS board
| AD-NEXUS-ETAS | |
| |
| Adaption for NEXUS MAC 71xx/72xx
Adaption for NEXUS MAC71xx/72xx
| AD-NEXUS-MAC | |
| |
| Adaption for NEXUS Debugger on Mictor
Pinout and connector description for the Freescale Micro Controller MPX56x. Non robust 38 pin connector. (Mictor38)
| AD-NEXUS-MICTOR | |
| |
| Adaption for NEXUS MPC5XXX
Pinout and connector description for the Freescale/ST PowerPC 55xx/56xx architecture.
| AD-NEXUS-MPC55XX | |
| |
| NEXUS Debug/Trace for MPC55xx/56xx AutoFocus
| AD-NEXUS-MPC55xx | |
| |
| Adaption for NEXUS Super10
Pinout and connector description for the ST Micro-Controller Super10.
| AD-NEXUS10 | |
| |
| Adaption for NEXUS Debugger on AMP50 (Non Robust)
Pinout and connector description for the Freescale Micro Controller MPX56x. Non robust 50 pin connector.
| AD-NEXUS50 | |
| |
| Adaption for NEXUS Debugger on GA51 (Robust)
Pinout and connector description for the Freescale Micro Controller MPX56x. Robust 51 pin connector (Glenair51).
| AD-NEXUS51 | |
| |
| Adaption for Nios II
Description of all supported connector types for debugging and tracing the Nios II core.
| AD-NIOS | |
| |
| Adaption for CEVA-Oak/Teak/TeakLite
| AD-OAK | |
| |
| Conv. 16 Pin OCDS-L1 to Samtec 60 for TriCore
Converter for TriCore 16-pin JTAG connector (OCDS-L1 debugger) to 60-pin SAMTEC connector (OCDS-L2 off-chip trace).
| AD-OCDS-TRICORE-SAMTEC60 | |
| |
| OMAP3 Conv. Mictor-38, MIPI-34 to Mictor-38
Converter to connect an ARM Preprocessor and a CombiProbe to a Mictor connector on the target.
| AD-OMAP35XX-MIPI34 | |
| |
| OMAP4 Conv. 2xMictor, ARM20, MIPI34 to MIPI60
Converter to connect an ARM Preprocessor (up to 18-bit PTM) and one CombiProbe (STM; two connection options) or a Debug Cable to a MIPI-60 connector on the target.
| AD-OMAP4XXX-MIPI60 | |
| |
| Adaption for PandaBoard (LA-3840)
| AD-PANDA | |
| |
| Adaption for QorIQ High-speed Serial Trace Port
Adaption for High-Speed serial trace probe for QorIQ P40XX
| AD-QorIQ | |
| |
| Adaption JTAG Debugger for QorIQ 32/64 Bit (ICD)
| AD-QorIQ-JTAG | |
| |
| Adaption JTAG Debugger for MPC85XX/QorIQ (ICD)
| AD-QorIQ-JTAG-MPC85XX | |
| |
| Adaption for RTP
| AD-RTP | |
| |
| Adaption for RX
Pinassignment of Debug and Trace Adaption for Renesas RX Family
| AD-RX | |
| |
| Adapter for SOC Trace
| AD-SOCCON | adsoccon.pdf |
| |
| Adaption for SO_DDR_400 (LA-7956)
Logicanalyzer pinassignment for SODDR adaption. Requires two Mictor Probes plus one Mictor Differential Clock Probe
| AD-SODDR | |
| |
| Adaption for SO_DDR2_400 (LA-7957)
Logicanalyzer pinassignment for SODDR2 adaption. Requires two Mictor Probes plus one Mictor Differential Clock Probe
| AD-SODDR2 | |
| |
| Adaption for SO_SDRAM (LA-7955)
Logicanalyzer pinassignment for SODRAM adaption. Requires three Mictor Probes
| AD-SODRAM | |
| |
| Adaption for TriCore Debugger
16- and 10-pin debugger connector supporting JTAG and DAP protocoll for TriCore devices.
| AD-TC | |
| |
| Adaption for V850 and VR-Series
Pinassignment of Debug and Trace Adaption for NEC/Renesas V850 and VR Family
| AD-V850 | |
| |
| Adaption for VR Series
| AD-VR | |
| |
| Adaption for XC800 Debugger via OCDS
Adaptation for XC800 Debugger via OCDS
| AD-XC800 | |
| |
| Target Adaption for XCORE
| AD-XCORE | adxcore.pdf |
| |
| Adaption for Xtensa
| AD-XTENSA | |
| |
| Adaption for ZSP
| AD-ZSP | |
| |
| Adaption for DSP Tace
Adaption for DSP Trace
| ADAPTION DSPCON | |
| |
| Adaption for EGOLD+
Target adaption for EGOLD+
| ADAPTION EGOLD+ | |
| |
| Universal EPROM/Flash Adapter
Adapter to connect EPROM/FLASH simulator to target.
| ADAPTION ESICON | |
| |
| Connector for RISC-Trace PowerQuiccII
Connects RISC-Trace for PowerQuicc II.
| ADAPTION ESTCON | adestcon.pdf |
| |
| Preprocessor Adaption for C167 Family
Universal Connector for C167 family, compatible to PHYTEC evaluation boards.
| ADAPTION ICE-CON | |
| |
| Target Adaption for MPC555
Target adaptation for MPC555
| ADAPTION MPC555 | |
| |
| Target Adaption for MPC56x
| ADAPTION MPC56X | |
| |
| Target Adaption for MPC8240
Target adaption for MPC8240
| ADAPTION MPC8240 | admpc8240.pdf |
| |
| Target Adaption for MPC8260
Target adaption for MPC8260
| ADAPTION MPC8260 | admpc8260.pdf |
| |
| Target Adaption MPC850 and MPC823
Target adaption for MPC850 and MPC823
| ADAPTION MPC850 | |
| |
| Target Adaption MPC860 and MPC821
Target adaption MPC860 and MPC821
| ADAPTION MPC860 | |
| |
| Target Adaption MPC870 and MPC875
| ADAPTION MPC870 | |
| |
| Target Adaption MPC880 and MPC885
| ADAPTION MPC880 | |
| |
| Adaption for OCDS Level 2 TriCore
Connector description and layout for TriCore OCDS-L2 off-chip trace connector AMP 40-pin and SAMTEC 60-pin.
| ADAPTION OCDS2 | |
| |
| Universal Trace Adapter for MPC5xx/MPC8xx
| ADAPTION PPCCON | |
| |
| Program Flow Trace Connector for Power Architectur
Program Flow Trace Connector for Power Architecture
| ADAPTION PRC-CON | |
| |
| Target Adaption SH7055
Target adaption SH7055
| ADAPTION SH7055 | |
| |
| Target Adaption for StarCore
Information about adaption of StarCore target boards to Lauterbach JTAG Debug and Nexus Trace hardware.
| ADAPTION StarCore | |
| |
| Adaption for ARM7
| ADAPTION-ARM7 | |
| |
| Adaption for EGOLD
Target adaption for EGOLD
| ADAPTION-EGOLD | |
| |
| Adaption for XC2xxx/XE166 via DAP
Pinout and signal recommendations for the DAP debug connector for XC2000 and XE166
| ADDAP-XC | |
| |
| ETMv3 Conv. Mictor-38, MIPI-34 to MIPI-60
ARM Converter to connect an ARM Preprocessor with one Mictor-38 for 16-bit ETMv3 and one CombiProbe for a 4-bit system trace port to a MIPI-60 connector on the target.
| CON-ETM3-MIPI34SAM60 | |
| |
|
Features