FIRE Emulator for C166S V2 Family

Basics

The FIRE XC166 Emulator consists of 3 modules:

		C166S V2 Bondout Trigger Module
		C166S V2 Bondout Module
		CPU Adapter
		Adapter (Clip-Over, Solder-On, AMP, YAMAICHI)

Bondout Module

Operating Modes

• Reset Down
• Reset Up
• Alone Internal
• Alone External
• Emulation Internal
• Emulation External

Operation Frequency

• 40 MHz Zero-Waitstate FLASH Emulation
• 40 MHz External Memory Emulation with Zero Wait States and Dualport Access (Injected)

Dual-Port Access

• Non-Intrusive Access for ROM/FLASH (Shadowing)
• Non-Intrusive Access for External Emulation Memory
• Non-Intrusive Access Access for XRAM
• Injected Access to all memory areas

FLASH Emulation

• 128K FLASH emulation (overlay RAM)
• 128K monitor RAM
• No speed limit
• Direct access by shadowing

External Bus Emulation

• Up to 8 MByte with ARAM
• Address reconstruction
• All bus modes
• Non-intrusive dual-port access
• 1 wait state at 40 MHz

High-Speed External Bus Emulation

• 1 MByte at 16 Bit
• 0 wait state at 40 MHz
• Limited to CS0 (external FLASH emulation)

High-Speed Download

• 750 KByte/sec by JTAG to internal and external memory
• JTAG hardware accelerator

Trace Operation

• Bondout CPU cycles (fully depipelined)
• External BUS cycles
• Internal and external cycles
• Clock Trace

HLL Debugging

• Full support in real-time
• ROM and external busses
• Break-before-line operation
• HLL single step in real-time
• Trigger and trace on local variables
• Trigger and trace on bit variables

C

• C166 (ARM Germany GmbH)
• XC16X/ST10 (Cosmic Software)
• GNU-GCC166 (HighTec EDV-Systeme GmbH)
• C166 (TASKING)

C++

• GNU-CPP166 (HighTec EDV-Systeme GmbH)
• CP166 (TASKING)

RTOS Support

• ARTX-166 (ARM Germany GmbH)
• CMX-RTX (CMX Systems Inc.)
• Elektrobit tresos (Elektrobit Automotive GmbH)
• Erika (Evidence)
• Nucleus PLUS (Mentor Graphics Corporation)
• osCAN (Vector Informatik)
• OSE Basic (Enea OSE Systems)
• OSE Epsilon (Enea OSE Systems)
• OSEK (-)
• ProOSEK (Elektrobit Automotive GmbH)
• PXROS (HighTec EDV-Systeme GmbH)
• RTX166/-tiny (ARM Germany GmbH)
• RTXC 3.2 (Quadros Systems Inc.)
• RTXC Quadros (Quadros Systems Inc.)
• Rubus OS (Articus Systems AB)
• SDT-Cmicro (IBM Corp.)
• uC/OS-II (Micrium Inc.)

Operation with external or internal Clock

• 1..50 MHz internal clock (XTAL1)
• external or internal clock (32kHz) for XTAL3

Voltage and Clock Monitors for the Target System

Exception Control

• Static Exception Setting
  • RSTIN
  • NMI
• Target Exception Control
  • RSTIN
  • NMI
• Exception Trigger
  • RSTOUT
  • RSTIN
  • TRAP

Reset Control

• Support of all reset modes by emulator (standalone and with target)

Monitor and Injection Control

• Injection and monitor level can be selected separately

Foreground Monitor Support

• Support of foreground monitor systems in FLASH and External Memory

Bondout CPU

• Bondout chip on socket for easy replacement
  
  
  

Bondout Trigger and Trace Module

Bondout Trace with 192 Channels

• 24 Bit Code Execution Address
• 24 Bit Operand Read Address
• 24 Bit Operand Write Address
• 16 Bit Operand Data
• 32 Bit Opcode
• 24 Bit Control Signals
• 48 Bit MAC Unit

Hardware Dequeuing

• Automatic dequeeing of all data and control signals
• Simple trigger and selective trace control

Code Coverage

• Two 1 or 4 MByte areas, can be remapped to exery address within the full address range
• Only execution cycles, no prefetches

Data Read Access Flag System

• 2 ranges with 1 or 4 MByte each, can be remapped to exery address within the full address range
• 1 byte resolution

Data Write Access Flag System

• 2 ranges with 1 or 4 MByte each, can be remapped to exery address within the full address range
• 1 byte resolution

Code Breakpoint Memory

• 4 breakpoint areas with 1 MByte each
• Dynamic remap to every base address
• 4 different breakpoints types can be defined
• Every breakpoint can be qualified by data value, mask or pattern (local variable triggering)

Data Access Breakpoint Memory

• 4 Breakpoint Areas with 1 MByte each
• Dynamic remap to every base address
• 4 different breakpoints types can be defined
• Separate READ and WRITE breakpoints
• Byte aligned breakpoints
• Every breakpoint can be qualified by data value, mask or pattern

Shadow Memory

• 1 MByte Shadow Memory
• Can be remapped
• Tracking of external, IRAM and XRAM variables on the fly, non intrusive

Read-Before-Write Trigger

• For XRAM and IRAM
• Can be remapped

CPU Adapters

Adapters for XC161CJ

• ET-1109 Clip Over Adapter for ET144-QF63
• ET-1110 Surface Mountable Adapter for ET144-QF63
• YA-1111 Emul. Adapter for YAMAICHI socket ET144-QF63
• TO-1310 Emul. Adapter for T0 socket ET144-QF63
• TO-1311 Emul. Adapter TO-surface mount. ET144-QF63

Adapters for XC164CS

• YA-1091 Emul. Adapter for YAMAICHI socket ET100-QF49
• ET-1092 Surface Mountable Adapter for ET100-QF49
• TO-1250 Emul. Adapter for T0 socket ET100-QF49
• TO-1251 Emul. Adapter TO-surface mount. ET100-QF49
• TO-1255 Emul. Adapter for T0 socket ET100-SE 0.4mm

Peripherals Access

Port Analyzer

• Trace an all peripheral ports

On-Circuit Emulation

• Support for clip-over adapters
• Power-up reset for target CPU by emulator

Automatic Setup Configuration by Reading Reset Vectors

Support of Reset Vectors for Standalone Operation

Compatible OCDS Debugger

XC2000/C166SV2 Debugger

Full HLL and ASM support available Batch Processing Supports Keil, Tasking and GNU Compilers 1.8 .. 5.0 Volt Support Support for Internal Triggers Break on Code or Data Unlimited Software Breakpoints Fast download

Port Analyzer

FIRE Port Analyzer

List of Port Analyzer Channels

IDE - Integrated Development Environment

	ASM Debugger Supports almost all file formats Assembler source-level debugging Advanced memory display Inline assembler Memory tests Customizable windows Peripheral windows Terminal window Semi-hosting Flash programming Full support for peripherals
	High-Level-Language Debugging Supports multiple languages Full support for C++ Integrated into TRACE32 environment Supports most compilers and hosts Same user interface on different hosts High speed download Debugs optimized code Display of function nesting Display of linked lists Powerful expression evaluation
	Compiler Support C C166 (ARM Germany GmbH) EOMF-166 XC16X/ST10 (Cosmic Software) ELF/DWARF GNU-GCC166 (HighTec EDV-Systeme GmbH) DBX C166 (TASKING) IEEE C++ GNU-CPP166 (HighTec EDV-Systeme GmbH) DBX CP166 (TASKING) IEEE
	Logical Display of Peripherals Display of onchip peripherals User definable windows Interactive window definition with softkey support Pulldown menues for selection of choices Additional description for each field
	Script Language PRACTICE Structured Language Menu Support Command Logs Custom Menues Custom Toolbars and Buttons Custom Dialog Windows 64-Bit Arithmetic Numeric, Logical and String Operators Direct Access to System States
	NOR FLASH Programming Internal and/or external NOR FLASH memories All common NOR FLASH types Programming of multiple NOR FLASH devices Provided by debuggers and in-circuit emulators
	NAND FLASH Programming Generic and CPU-specific NAND FLASH controllers Support all common NAND FLASH devices Bad block treatment (skipped, reserved block area) ECC generation
	SIM Instruction Set Simulators Easy high-level and assembler debugging Interface to all compilers Trace Buffer Powerful script language Software compatible to all TRACE32 tools Hardware simulation
	Trace-based Profiling Detailed analysis of function run-times Detailed analysis of task run-times and state Graphical analysis of variable values over the time Analysis of the time interval of a single event (e.g. Interrupt) Analysis of the time interval between 2 defined events
	Trace-based Code Coverage Long-Time Hardware Coverage Analysis for Emulator and ETM Trace Based Coverage Analysis for ICD and Emulator Analysis on ASM and HLL Coverage summary on modul/function level
	Sample-based Profiling Long-time performance analysis for functions Long-time performance analysis for tasks Long-time analysis of the contents of a variable or memory location and more
	Logger Software trace of any size stored in an array structure on the target General trace format provided by TRACE32-PowerView Configuration and display commands provided by TRACE32-PowerView Works as trace with address and data information Works as a program flow trace (SH4, PowerPC) Time stamp possible Predefined algorithms to fill the trace provided by Lauterbach User defined algorithms to fill the trace also possible
	Snooper Samples memory while application is running Support for special debug communication channels All trace display and analysis functions can be used Trigger on specific values Dynamic performance analysis
	RTOS Support ARTX-166 (ARM Germany GmbH) CMX-RTX (CMX Systems Inc.) Elektrobit tresos (Elektrobit Automotive GmbH) Erika (Evidence) Nucleus PLUS (Mentor Graphics Corporation) osCAN (Vector Informatik) OSE Basic (Enea OSE Systems) OSE Epsilon (Enea OSE Systems) OSEK (-) ProOSEK (Elektrobit Automotive GmbH) PXROS (HighTec EDV-Systeme GmbH) RTX166/-tiny (ARM Germany GmbH) RTXC 3.2 (Quadros Systems Inc.) RTXC Quadros (Quadros Systems Inc.) Rubus OS (Articus Systems AB) SDT-Cmicro (IBM Corp.) uC/OS-II (Micrium Inc.)
	3rd Party Tool Integration X-TOOLS / X32 (blue river software GmbH) CODEWRIGHT (Borland Software Corporation) EASYCODE (EASYCODE GmbH) ECLIPSE (Eclipse Foundation, Inc) RHAPSODY IN MICROC (IBM Corp.) RHAPSODY IN C++ (IBM Corp.) LDRA TOOL SUITE (LDRA Technology, Inc.) ATTOL TOOLS (MicroMax Inc.) VISUAL BASIC INTERFACE (Microsoft Corporation) LABVIEW (NATIONAL INSTRUMENTS Corporation) CODE::BLOCKS (Open Source) RAPITIME (Rapita Systems Ltd.) DA-C (RistanCASE) SIMULINK (The MathWorks Inc.) WINDOWS CE PLATF. BUILDER (Windows) SDT CMICRO (IBM Corp.)
	Help System Acrobat Based Documentation Fast Text Search Device Specific Filtering Basic and Advanced Help Training Manuals Included WWW Update