TRACE32® Adaption for ZSP

Debugger Adaption for ZSP

Target Connector for ZSP

Half-Size Adapters

Technical Support

Debugger Adaption for ZSP

Connector 20 pin

Signal	Pin	Pin	Signal


VTREF	1	2	N/C
TRST-	3	4	GND
TDI	5	6	GND
TMS	7	8	GND
TCK	9	10	GND
N/C	11	12	GND
TDO	13	14	GND
SRTS-	15	16	GND
N/C	17	18	GND
N/C	19	20	GND

Target Connector for ZSP

Dimension

Connector Type

This is a standard 20 pin double row (two rows of 10 pins) connector (pin to pin spacing: 2.54mm/0.100").
If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 30.6mm/1.2".

Connector 16 pin (obsolete)

Signal	Pin	Pin	Signal


TDO	1	2	GND
TDI	3	4	TRST-
N/C	5	6	VDD
TCK	7	8	N/C
TMS	9	10	N/C
N/C	11	12	N/C
HRESET-	13	14	N/C
N/C	15	16	GND

This is a standard 16 pin double row (two rows of eight pins) connector (pin to pin spacing: 0.100 in.)
NOTE: This pinout was used with older ZSP400 boards and was superseded by the 20pin ARM-compatible pinout (see above). In case you need a connector with the old pinout please contact Lauterbach support.

Half-Size Adapters

Half-Size Adapters for Debuggers

100 mil to 50 mil Adapters
Small Footprint for Target Connector

Copyright © 2012 Lauterbach GmbH, Altlaufstr.40, D-85635 Höhenkirchen-Siegertsbrunn, Germany Impressum
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice.
Last generated/modified: 16-Feb-2012