Adaption for Xtensa

Debugger Adaption for Xtensa

Connector 14 pin

Signal	Pin		Pin	Signal
TDI	1		2	GND
TDO	3		4	GND
TCK	5		6	GND
N/C	7		8	KEY PIN
RESET-	9		10	TMS
VCCS	11		12	N/C
N/C	13		14	TRST-

Target Connector for Debugger Adaption for Xtensa

Dimension

Connector Type

• This is a standard 14 pin double row (two rows of 7 pins) connector (pin to pin spacing: 2.54mm/0.100").
• If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 23mm/0.9".

Half-Size Adapters

Half-Size Adapters for Debuggers

100 mil to 50 mil Adapters Small Footprint for Target Connector